This patch consists of the usual driver updates (megaraid_sas,
scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an
assortment of minor fixes and the first precursors of SCSI-MQ (the code
path simplifications) and the bug fix for the USB oops on remove (which
involves an infrastructure change, so is sent via the main tree with a
delayed backport after a cycle in which it is shown to introduce no new
bugs).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Adam Radford (5):
megaraid_sas: Version and Changelog update
megaraid_sas: Add Dell PowerEdge VRTX SR-IOV VF support
megaraid_sas: Return leaked MPT frames to MPT frame pool
megaraid_sas: Fix megasas_ioc_init_fusion
megaraid_sas: Load correct raid context timeout
Akinobu Mita (7):
scsi_debug: add ability to enable clustering
scsi_debug: protect device access with atomic_rw lock
scsi_debug: prepare to enable clustering
scsi_debug: fix resp_xdwriteread() return value when running out of memory
scsi_debug: fix duplicate dif_errors increment
scsi_debug: make pseudo_primary static
scsi_debug: fix false positive logical block reference tag check fail
Alan Stern (1):
sd: don't fail if the device doesn't recognize SYNCHRONIZE CACHE
Alexander Gordeev (2):
ipr: Use pci_enable_msi_range() and pci_enable_msix_range()
ipr: Get rid of superfluous call to pci_disbale_msi/msix()
Anil Gurumurthy (1):
bfa: Updating Maintainers email ids
Armen Baloyan (6):
qla2xxx: Add IOCB Abort command asynchronous handling.
qla2xxx: Fix Task Management command asynchronous handling
qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec.
qla2xxx: Remove Marker type IOCB logic for ISPFX00.
qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro for ISPFX00.
qla2xxx: Add handling for boot indication progress AENs for ISPFX00.
Arvind Kumar (2):
vmw_pvscsi: Some improvements in pvscsi driver.
vmw_pvscsi: Fix pvscsi_abort() function.
Atul Deshmukh (2):
qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044.
qla2xxx: Use proper message for Non owner reset ACK Timeout.
Bart Van Assche (2):
remove a useless get/put_device pair in scsi_next_command
remove a useless get/put_device pair in scsi_request_fn
Ben Hutchings (1):
bfa: Replace large udelay() with mdelay()
Bradley Grove (2):
pm80xx: Enable BAR shift to avoid BIOS conflict with MPI space for ATTO pm8001 based HBAs.
pm80xx: Read saved WWN from NVMD for ATTO pm8001 based HBAs.
Brian King (1):
ipr: Handle early EEH
Chad Dupuis (7):
qla2xxx: Fix build errors related to invalid print fields on some architectures.
qla2xxx: Fixup looking for a space in the outstanding_cmds array in qla2x00_alloc_iocbs().
qla2xxx: Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
qla2xxx: Add support for ISP2071.
scsi_transport_fc: Add 32Gbps speed definition.
qla2xxx: Set host can_queue value based on available resources.
qla2xxx: Add mutex around optrom calls to serialize accesses.
Christoph Hellwig (7):
add support for per-host cmd pools
simplify command allocation and freeing a bit
megaraid: simplify internal command handling
remove a useless get/put_device pair in scsi_requeue_command
do not manipulate device reference counts in scsi_get/put_command
avoid taking host_lock in scsi_run_queue unless nessecary
avoid useless free_list lock roundtrips
Daeseok Youn (1):
lpfc: use NULL instead of 0 for pointer
Dan Carpenter (3):
arcmsr: upper 32 of dma address lost
megaraid: missing bounds check in mimd_to_kioc()
qla2xxx: fix error handling of qla2x00_mem_alloc()
Dan Williams (2):
isci: fix needless ata reset escalations
libsas: introduce scmd_dbg() to quiet false positive "timeout" messages
Eddie Wai (3):
bnx2fc: Updated version to 2.4.2
bnx2fc: Fixed the handling for the SCSI retry delay
bnx2fc: Fixed scsi_remove_target soft lockup when rmmod bnx2x
Eiichi Tsukata (1):
Add timeout to avoid infinite command retry
Ethan Zhao (1):
iscsi_boot_sysfs: Fix a memory leak in iscsi_boot_destroy_kset()
Hannes Reinecke (10):
ses: Use vpd information from scsi_device
Add EVPD page 0x83 and 0x80 to sysfs
Return VPD page length in scsi_vpd_inquiry()
scsi_sysfs: Implement 'is_visible' callback
megaraid_sas: check return value for megasas_get_pd_list()
megaraid_sas_fusion: Return correct error value in megasas_get_ld_map_info()
megaraid_sas_fusion: correctly pass queue info pointer
bfa: set correct command return code
hpsa: fixup MSI-X registration
scsi_error: disable eh_deadline if no host_reset_handler is set
James Bottomley (2):
dual scan thread bug fix
fix our current target reap infrastructure
James Smart (16):
lpfc: remove self-assignments
lpfc 8.3.45: Update lpfc version to driver version 8.3.45
lpfc 8.3.45: Fixed crash during driver unload.
lpfc 8.3.45: Fixed driver error messages after firmware download
lpfc 8.3.45: Fixed missing initialization for task management IOCBs
lpfc 8.3.45: Fix sysfs buffer overrun in read of lpfc_fcp_cpu_map for 128 CPUs.
lpfc 8.3.45: Incorporate changes to use reason in change_queue_depth function.
lpfc 8.3.45: Incorporated support of a low-latency io path
lpfc 8.3.45: Added dport mailbox pass through support.
lpfc 8.3.44: Update lpfc version to driver version 8.3.44
lpfc 8.3.44: Fixed unassigned variable in ELS timeout message
lpfc 8.3.44: Fixed incorrect allocation of iDiags directories/files in debugfs
lpfc 8.3.44: Fix kernel panics from corrupted ndlp list
lpfc 8.3.44: Fix Crash in lpfc_els_timeout_handler
lpfc 8.3.44: Fixed stopped FCF discovery on failed FCF record read
lpfc 8.3.44: Fixed IO hang when in msi mode.
Jayamohan Kallickal (7):
be2iscsi : Bump the driver version
be2iscsi : Fix DMA Out of SW-IOMMU space error
be2iscsi: Fix scsi_cmnd leakage in driver.
be2iscsi: Fix the session cleanup when reboot/shutdown happens
be2iscsi: Fix doorbell format for EQ/CQ/RQ s per SLI spec.
be2iscsi: Fix port speed typo in driver.
be2iscsi: Fix handling timed out MBX completion from FW
Joe Carnuccio (1):
qla2xxx: Enable the Flash Access Control (FAC) mailbox command.
Karen Xie (1):
cxgb4i: Use cxgb4_select_ntuple to correctly calculate ntuple fields
Kees Cook (1):
esas2r: fix potential format string flaw
Lukasz Dorau (1):
isci: update version to 1.2
Mahesh Rajashekhara (1):
aacraid: kdump fix
Martin K. Petersen (1):
sd: Quiesce mode sense error messages
Matt Gates (3):
hpsa: add support for 'fastpath' i/o
hpsa: mark last scatter gather element as the last
hpsa: use extended report luns command for HP SSD SmartPath
Maurizio Lombardi (1):
st: fix corruption of the st_modedef structures in st_set_options()
Michael Opdenacker (1):
remove deprecated IRQF_DISABLED from SCSI
Mike Christie (2):
iscsi_tcp: check for valid session before accessing
libiscsi: remove unneeded queue work when max_cmdsn is increased
Mike MIller (1):
hpsa: get physical device handles for io accel mode 2 as well as mode 1
Mike Miller (1):
hpsa: add ioaccel mode 2 structure definitions
Nilesh Javali (5):
qla4xxx: Handle IPv6 AEN notifications
qla4xxx: Clear DDB index map upon connection close failure
qla4xxx: Rename ACB_STATE macros with IP_ADDRSTATE macros
qla4xxx: Improve loopback failure messages
qla4xxx: ISP8xxx: Correct retry of adapter initialization
Rishi Mehta (1):
vmw_pvscsi: Add support for I/O requests coalescing.
Saurav Kashyap (8):
qla2xxx: Correct the port no assignment for ISP82XX.
qla2xxx: Update the driver version to 8.07.00.02-k.
qla2xxx: Correctly set the read_optrom pointer for ISP8044.
qla2xxx: Simplify the ISPFX00 interrupt handler code for ISPFX00.
qla2xxx: Avoid poisoning in the response queue for ISPFX00.
qla2xxx: Properly handle 32 bit mailbox register for ISPFX00.
qla2xxx: Select correct request queue for error type IOCB for ISPFX00.
qla2xxx: Remove init control block related dead code for ISPFX00.
Scott Teel (12):
hpsa: add controller base data-at-rest encryption compatibility ioaccel2
hpsa: update source file copyrights
hpsa: retry certain ioaccel error cases on the RAID path
hpsa: rescan devices on ioaccel2 error
hpsa: allow user to disable accelerated i/o path
hpsa: complete the ioaccel raidmap code
hpsa: add task management for ioaccel mode 2
hpsa: teach hpsa_device_reset to do either target or lun reset
hpsa: get ioaccel mode 2 i/o working
hpsa: complain if physical or logical aborts are not supported
hpsa: add hp_ssd_smart_path_enabled sysfs attribute
hpsa: fix task management for mode-1 ioaccell path
Shlomo Pongratz (2):
libiscsi: Reduce locking contention in fast path
libiscsi: Restructure iscsi_tcp r2t response logic
Stephen M. Cameron (24):
hpsa: update driver version to 3.4.4-1
hpsa: fix bad endif placement in RAID 5 mapper code
hpsa: Do not zero fields of ioaccel2 command structure twice
hpsa: Add hba mode to the hpsa driver
hpsa: remove unused struct request from CommandList
hpsa: bring format-in-progress drives online when ready
hpsa: remove unused kthread.h header
hpsa: Add support for a few HP Storage controllers
hpsa: add HP/3PAR vendor id to pci_ids.h
hpsa add sysfs debug switch for raid map debugging messages
hpsa: improve error messages for driver initiated commands
hpsa: only do device rescan for certain events
hpsa: when switching out of accel mode await only accel command completions
hpsa: do not inquire for unsupported ioaccel status vpd page
hpsa: allow VPD page zero to be queried
hpsa: make device update copy the raid map also
hpsa: initialize controller to perform io accelerator mode 2
hpsa: do ioaccel mode 2 resource allocations
hpsa: Acknowledge controller events in ioaccell mode 2 as well as mode 1
hpsa: do not rescan controllers known to be locked up
hpsa: poll controller to detect device change event
hpsa: update raid offload status on device rescan
hpsa: add ioaccell mode 1 RAID offload support.
hpsa: only allow REQ_TYPE_FS to use fast path
Steven J. Magnani (1):
qla2xxx: Re-sync module parameter descriptions with the code
Sumit.Saxena@xxxxxxx (4):
megaraid_sas: Performance boost fixes
megaraid_sas: Set 32-bit DMA mask
megaraid_sas: Big endian code related fixes
megaraid_sas: Don't wait forever for non-IOCTL DCMDs
Suresh Thiagarajan (1):
pm80xx: Spinlock fix
Tej Parkash (4):
qla4xxx: Driver not able to collect minidump for ISP84xx
qla4xxx: Fix pending IO completion in reset path before initiating chip reset
qla4xxx: Fix processing response queue during probe
qla4xxx: Fixed AER reset sequence for ISP83xx/ISP84xx
Tomas Henzl (1):
hpsa: increase the probability of a reported success after a device reset
Vaughan Cao (1):
iscsi: fix wrong order of opcode and itt in iscsi_handle_reject prompt
Vijaya Mohan Guvva (1):
bfa: Fix smatch warnings
Vikas Chaudhary (15):
qla4xxx: Update driver version to 5.04.00-k4
qla4xxx: Fix sparse warnings
qla4xxx: Update print statements in func qla4xxx_do_dpc()
qla4xxx: Update print statements in func qla4xxx_eh_abort()
qla4xxx: Update print statements in qla4xxx_mailbox_command()
qla4xxx: Updated print for device login, logout path
qla4xxx: Remove unused code from qla4xxx_set_ifcb()
qla4xxx: Fix failure of mbox 0x31
qla4xxx: Reduce rom-lock contention during reset recovery.
qla4xxx: Fix failure of IDC Time Extend mailbox command
qla4xxx: Return correct error status from func qla4xxx_request_irqs()
qla4xxx: Correctly handle msleep_interruptible
qla4xxx: Use IDC_CTRL bit1 directly instead of AF_83XX_NO_FWDUMP flag.
qla4xxx: Fix comments in code
qla4xxx: Print WARN_ONCE() if iSCSI function presence bit removed
Viswas G (2):
pm80xx: Fixed return value issue
pm80xx: Removing redundant code snippets
Wei Yongjun (1):
bfa: fix missing unlock on error in bfad_iocmd_cfg_trunk()
Wendy Xiong (4):
ipr: Add new CCIN definition for Grand Canyon support
ipr: Format HCAM overlay ID 0x21
ipr: Add new CCIN definition for new hardware support
ipr: Remove extended delay bit on GSCSI reads/writes ops
XinHong Zhu (2):
pm80xx: fix problem of pm8001_work_fn reseting incorrect phy device
pm80xx: no need for tag allocation when issuing the command of unregistering device
and the diffstat
Documentation/ABI/testing/sysfs-class-scsi_host | 16 +
Documentation/scsi/ChangeLog.megaraid_sas | 13 +
MAINTAINERS | 4 +-
drivers/scsi/NCR5380.c | 2 +-
drivers/scsi/aacraid/aacraid.h | 2 +-
drivers/scsi/aacraid/rx.c | 9 +-
drivers/scsi/aacraid/sa.c | 3 +-
drivers/scsi/aacraid/src.c | 4 +-
drivers/scsi/aha152x.c | 4 +-
drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h | 1 -
drivers/scsi/arcmsr/arcmsr_hba.c | 7 +-
drivers/scsi/arm/acornscsi.c | 2 +-
drivers/scsi/arm/cumana_1.c | 2 +-
drivers/scsi/arm/cumana_2.c | 2 +-
drivers/scsi/arm/powertec.c | 2 +-
drivers/scsi/be2iscsi/be.h | 11 +
drivers/scsi/be2iscsi/be_cmds.c | 121 +-
drivers/scsi/be2iscsi/be_cmds.h | 10 +-
drivers/scsi/be2iscsi/be_iscsi.c | 13 +-
drivers/scsi/be2iscsi/be_main.c | 105 +-
drivers/scsi/be2iscsi/be_main.h | 23 +-
drivers/scsi/be2iscsi/be_mgmt.c | 22 +-
drivers/scsi/bfa/bfa_ioc.c | 11 +-
drivers/scsi/bfa/bfad_bsg.c | 4 +-
drivers/scsi/bfa/bfad_im.c | 7 +-
drivers/scsi/bnx2fc/bnx2fc.h | 3 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 8 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 19 +-
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 1 +
drivers/scsi/bnx2i/bnx2i_hwi.c | 46 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 8 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 59 +-
drivers/scsi/dtc.c | 2 +-
drivers/scsi/eata.c | 2 +-
drivers/scsi/eata_pio.c | 4 +-
drivers/scsi/esas2r/esas2r_init.c | 2 +-
drivers/scsi/esas2r/esas2r_log.c | 8 +-
drivers/scsi/g_NCR5380.c | 2 +-
drivers/scsi/gdth.c | 6 +-
drivers/scsi/hosts.c | 2 +-
drivers/scsi/hpsa.c | 2686 +++++++++++++++++++++--
drivers/scsi/hpsa.h | 171 +-
drivers/scsi/hpsa_cmd.h | 270 ++-
drivers/scsi/ibmvscsi/ibmvstgt.c | 2 +-
drivers/scsi/in2000.c | 2 +-
drivers/scsi/initio.c | 2 +-
drivers/scsi/ipr.c | 367 +++-
drivers/scsi/ipr.h | 22 +
drivers/scsi/isci/init.c | 2 +-
drivers/scsi/isci/request.c | 8 +-
drivers/scsi/iscsi_boot_sysfs.c | 1 +
drivers/scsi/iscsi_tcp.c | 25 +-
drivers/scsi/libiscsi.c | 232 +-
drivers/scsi/libiscsi_tcp.c | 71 +-
drivers/scsi/libsas/sas_scsi_host.c | 2 +-
drivers/scsi/lpfc/lpfc.h | 22 +-
drivers/scsi/lpfc/lpfc_attr.c | 628 +++++-
drivers/scsi/lpfc/lpfc_bsg.c | 3 +
drivers/scsi/lpfc/lpfc_bsg.h | 2 +
drivers/scsi/lpfc/lpfc_crtn.h | 24 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 108 +
drivers/scsi/lpfc/lpfc_disc.h | 2 +-
drivers/scsi/lpfc/lpfc_els.c | 200 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 39 +-
drivers/scsi/lpfc/lpfc_hw.h | 1 +
drivers/scsi/lpfc/lpfc_hw4.h | 6 +
drivers/scsi/lpfc/lpfc_init.c | 277 ++-
drivers/scsi/lpfc/lpfc_mem.c | 47 +
drivers/scsi/lpfc/lpfc_nportdisc.c | 56 +-
drivers/scsi/lpfc/lpfc_scsi.c | 552 ++++-
drivers/scsi/lpfc/lpfc_scsi.h | 18 +
drivers/scsi/lpfc/lpfc_sli.c | 267 ++-
drivers/scsi/lpfc/lpfc_sli.h | 2 +
drivers/scsi/lpfc/lpfc_sli4.h | 21 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid.c | 120 +-
drivers/scsi/megaraid.h | 3 +-
drivers/scsi/megaraid/megaraid_mm.c | 2 +
drivers/scsi/megaraid/megaraid_sas.h | 114 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 815 +++++--
drivers/scsi/megaraid/megaraid_sas_fp.c | 11 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 272 ++-
drivers/scsi/megaraid/megaraid_sas_fusion.h | 3 +
drivers/scsi/pas16.c | 2 +-
drivers/scsi/pm8001/pm8001_ctl.c | 38 +-
drivers/scsi/pm8001/pm8001_hwi.c | 105 +-
drivers/scsi/pm8001/pm8001_init.c | 12 +-
drivers/scsi/pm8001/pm8001_sas.c | 3 +-
drivers/scsi/pm8001/pm8001_sas.h | 12 +
drivers/scsi/pm8001/pm80xx_hwi.c | 97 +-
drivers/scsi/qla2xxx/Makefile | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 193 +-
drivers/scsi/qla2xxx/qla_bsg.c | 12 +-
drivers/scsi/qla2xxx/qla_dbg.c | 134 +-
drivers/scsi/qla2xxx/qla_dbg.h | 7 +
drivers/scsi/qla2xxx/qla_def.h | 65 +-
drivers/scsi/qla2xxx/qla_dfs.c | 3 +-
drivers/scsi/qla2xxx/qla_fw.h | 4 +
drivers/scsi/qla2xxx/qla_gbl.h | 12 +-
drivers/scsi/qla2xxx/qla_gs.c | 11 +
drivers/scsi/qla2xxx/qla_init.c | 426 +++-
drivers/scsi/qla2xxx/qla_iocb.c | 44 +-
drivers/scsi/qla2xxx/qla_isr.c | 93 +-
drivers/scsi/qla2xxx/qla_mbx.c | 50 +-
drivers/scsi/qla2xxx/qla_mid.c | 4 +-
drivers/scsi/qla2xxx/qla_mr.c | 252 +--
drivers/scsi/qla2xxx/qla_mr.h | 57 +-
drivers/scsi/qla2xxx/qla_nx.c | 21 +-
drivers/scsi/qla2xxx/qla_nx2.c | 22 +-
drivers/scsi/qla2xxx/qla_os.c | 171 +-
drivers/scsi/qla2xxx/qla_sup.c | 65 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 909 ++++++++
drivers/scsi/qla2xxx/qla_tmpl.h | 205 ++
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/qla4xxx/ql4_83xx.c | 36 +-
drivers/scsi/qla4xxx/ql4_bsg.c | 4 +-
drivers/scsi/qla4xxx/ql4_def.h | 17 +-
drivers/scsi/qla4xxx/ql4_fw.h | 31 +-
drivers/scsi/qla4xxx/ql4_glbl.h | 2 +
drivers/scsi/qla4xxx/ql4_init.c | 7 +-
drivers/scsi/qla4xxx/ql4_isr.c | 69 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 25 +-
drivers/scsi/qla4xxx/ql4_nx.c | 89 +-
drivers/scsi/qla4xxx/ql4_os.c | 232 +-
drivers/scsi/qla4xxx/ql4_version.h | 2 +-
drivers/scsi/scsi.c | 373 ++--
drivers/scsi/scsi_debug.c | 141 +-
drivers/scsi/scsi_error.c | 6 +
drivers/scsi/scsi_lib.c | 112 +-
drivers/scsi/scsi_scan.c | 115 +-
drivers/scsi/scsi_sysfs.c | 242 +-
drivers/scsi/scsi_tgt_lib.c | 3 +-
drivers/scsi/scsi_transport_fc.c | 1 +
drivers/scsi/sd.c | 42 +-
drivers/scsi/sd.h | 6 +
drivers/scsi/ses.c | 38 +-
drivers/scsi/st.c | 11 +-
drivers/scsi/t128.c | 2 +-
drivers/scsi/u14-34f.c | 2 +-
drivers/scsi/vmw_pvscsi.c | 242 +-
drivers/scsi/vmw_pvscsi.h | 19 +-
drivers/scsi/wd7000.c | 2 +-
include/linux/pci_ids.h | 1 +
include/scsi/libiscsi.h | 17 +-
include/scsi/libiscsi_tcp.h | 2 +
include/scsi/scsi_cmnd.h | 6 +-
include/scsi/scsi_device.h | 22 +-
include/scsi/scsi_host.h | 7 +
include/scsi/scsi_transport_fc.h | 1 +
149 files changed, 10318 insertions(+), 2696 deletions(-)
create mode 100644 drivers/scsi/qla2xxx/qla_tmpl.c
create mode 100644 drivers/scsi/qla2xxx/qla_tmpl.h
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
