Hi Mike, qla4xxx_hw_reset is specific to ISP4032, which does not come in same block, there is check of ISP80XX (exclude ISP4032) before we enter this block. Let me know if any other concern. Thanks Tej ________________________________________ From: Mike Christie [michaelc@xxxxxxxxxxx] Sent: Friday, March 28, 2014 6:36 AM To: Vikas Chaudhary; jbottomley@xxxxxxxxxxxxx Cc: linux-scsi; zz-930433; Tej Parkash Subject: Re: [PATCH 01/10] qla4xxx: Do not wait for IO completion, after issuing stop_firmware On 02/24/2014 07:06 PM, vikas.chaudhary@xxxxxxxxxx wrote: > From: Tej Parkash <tej.parkash@xxxxxxxxxx> > > Problem: > iSCSI stop_firmware mailbox command is not completing outstanding IO. > What about qla4xxx_hw_reset? I saw the comment in qla4_8xxx_stop_firmware saying what you wrote above, but for the old qla4xxx_isp_ops I did not see anything like that and it seems to use different commands. ________________________________ This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
<<attachment: winmail.dat>>
