[Bug 72541] New: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=72541

            Bug ID: 72541
           Summary: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS
                    host is non-operational !!!!
           Product: SCSI Drivers
           Version: 2.5
    Kernel Version: 2.6.32-431
          Hardware: x86-64
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: high
          Priority: P1
         Component: Other
          Assignee: scsi_drivers-other@xxxxxxxxxxxxxxxxxxxx
          Reporter: oleg.khrustov@xxxxxxxxx
        Regression: No

Dell c5220

Controller information
------------------------------------------------------------------------
  Controller type                         : SAS2008
  BIOS version                            : 7.27.00.00
  Firmware version                        : 14.00.02.00
  Channel description                     : 1 Serial Attached SCSI

RAID1, 2xST9500620NS



Was running smoothly during 3 months machine finally stuck and/or rootfs
remounted to readonly.

Dmesg shows mpt2 sas errors.



mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work: Running mpt2sas_dead_ioc thread success !!!!
mpt2sas0: IR shutdown (sending)
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 16 6a b8 00 00 18 00
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 d9 32 98 00 00 08 00
Buffer I/O error on device dm-0, logical block 7942227
lost page write due to I/O error on dm-0
JBD2: Detected IO errors while flushing file data on dm-0-8
Aborting journal on device dm-0-8.
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 13 b0 00 00 00 08 00
Buffer I/O error on device dm-0, logical block 6324224
lost page write due to I/O error on dm-0
JBD2: I/O error detected when updating journal superblock for dm-0-8.
EXT4-fs error (device dm-0): ext4_journal_start_sb: Detected aborted journal
EXT4-fs (dm-0): Remounting filesystem read-only
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 06 8e b6 00 00 00 08 00
Buffer I/O error on device dm-2, logical block 516288
lost page write due to I/O error on dm-2
JBD2: Detected IO errors while flushing file data on dm-2-8
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 1f 95 ba 40 00 00 10 00
Aborting journal on device dm-2-8.
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 1f 93 b0 00 00 00 08 00
Buffer I/O error on device dm-2, logical block 52985856
lost page write due to I/O error on dm-2
JBD2: I/O error detected when updating journal superblock for dm-2-8.
EXT4-fs error (device dm-2): ext4_journal_start_sb: Detected aborted journal
EXT4-fs (dm-2): Remounting filesystem read-only
mpt2sas0: _scsih_ir_shutdown: timeout
sd 0:1:0:0: RAID REMOVE
sd 0:1:0:0: RAID REMOVE DONE
mpt2sas0: removing handle(0x00aa), wwid(0x0d142348722f1016)
mpt2sas0: removing handle(0x0009), sas_addr(0x4433221100000000)
mpt2sas0: removing handle(0x000a), sas_addr(0x4433221101000000)
sd 0:0:2:0: [sdb] Synchronizing SCSI cache
sd 0:0:2:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
mpt2sas0: removing handle(0x000b), sas_addr(0x4433221102000000)
sd 0:0:3:0: [sdc] Synchronizing SCSI cache
sd 0:0:3:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
mpt2sas0: removing handle(0x000c), sas_addr(0x4433221103000000)
mpt2sas0: sending diag reset !!
mpt2sas0: diag reset: FAILED
mpt2sas 0000:01:00.0: PCI INT A disabled

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux