Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

>> >> > gets called. Can you clarify what this register access does?
>> >> > If it's just setting a index into a mux output, would it make
>> >> > sense to have an optional DT property containing an integer with
>> >> > the mux setting you want to set? That way you wouldn't even
>> >> > have to have two compatible strings but just do
>> >> >
>> >> >         ret = of_property_read_u32(node, "apm,ahci-mux", &mux);
>> >> >         if (!ret)
>> >> >                 xgene_ahci_mux_select(ctx, mux);
>> >> >
>> >>
>> >> Given that fact that I will break up the resource. Let's just use the
>> >> resource for the MUX to handle this. For the IP that doesn't existed,
>> >> I will just not list it.
>> >
>> > Ah, that sounds good. It also means that if the firmware has set up
>> > the mux already, you don't have to touch it again. That would probably
>> > be the preferred case.
>> >
>> > I'm undecided about the value that you write in there. That could either
>> > be passed through DT as I suggested above for extra flexibility, or you
>> > can keep it hardcoded if you are absolutely sure that there will never
>> > need to be a case where you have to set it to something other than '1',
>>
>> It is only a mux between two IP's. Writing 1 is fine. For ACPI, it can
>> be missing and handled by the firmware or can be handled just like the
>> DTS way.
>
> Why can't you have it handled by the firmware in the DTS case?
>
> I still think it's rather unlikely that we will actually see ACPI support
> on your platform, btw.
>
> I'm willing to look at the patches you need for it, but I'm not very
> optimistic, in particular because of the kind of hacks you need
> for random bits of hardware.
>

I am about to post another version. Can you look at the next version?
If you still think it needs to be moved to the FW (either U-Boot or
Tianocore UEFI boot loader), I will then move out of the Linux driver
code.

-Loc
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux