This patch adds support for the APM X-Gene SoC AHCI SATA host controller. In
order for the host controller to work, the corresponding PHY driver
musts also be available.
v12:
* Remove function xgene_ahci_get_channel and use the ata_port field port_no
* Update comment for function xgene_ahci_read_id to function comment style
'/**'
* Update comment for multiple lines to fully-winged style
v11:
* Drop the export functions requirement with libachi
* Change CONFIG_SATA_XGENE to CONFIG_AHCI_XGENE
* Rename file sata_xgene.c to ahci_xgene.c
* Convert to use Hans De Geode version 5 ahci_platform code re-factor changes
to reduce code duplication. For extra context, use plat_data to store our
context. The probe function follows the ahci_sunxi implementation. A number
of code fragments update to reflect this change.
* Update comment for function xgene_ahci_read_id
* Minor code move around in function xgene_ahci_do_hardreset and use
ATA_BUSY instead 0x80
* Fix hardreset to use start_engine function pointer as required due to newer
kernel rebased
* Fix the set DMA mask for 32-bit as well
v10:
* Update binding documentation
v9:
* Remove ACPI/EFI include files
* Remove the IO flush support, interrupt routine, and DTS resources
* Remove function xgene_rd, xgene_wr, and xgene_wr_flush
* Remove PMP support (function xgene_ahci_qc_issue, xgene_ahci_qc_prep,
xgene_ahci_qc_fill_rtf, xgene_ahci_softreset, and xgene_ahci_do_softreset)
* Rename function xgene_ahci_enable_phy to xgene_ahci_force_phy_rdy
* Clean up hardreset functions
* Require v7 of the PHY driver
v8:
* Remove _ADDR from defines
* Remove define MSTAWAUX_COHERENT_BYPASS_SET and
STARAUX_COHERENT_BYPASS_SET and use direct coding
* Remove the un-necessary check for DTS boot with built in ACPI table
* Switch to use dma_set_mask_and_coherent for setting DMA mask
* Remove ACPI table matching code
* Update clock-names for sata01clk, sata23clk, and sata45clk
v7:
* Update the clock code by toggle the clock
* Update the DTS clock mask values due to the clock spilt between host and
v5 of the PHY drivers
v6:
* Update binding documentation
* Change select PHY_XGENE_SATA to PHY_XGENE
* Add ULL to constants
* Change indentation and comments
* Clean up the probe functions a bit more
* Remove xgene_ahci_remove function
* Add the flush register to DTS
* Remove the interrupt-parent from DTS
v5:
* Sync up to v3 of the PHY driver
* Remove MSLIM wrapper functions
* Change the memory shutdown loop to use usleep_range
* Use devm_ioremap_resource instead devm_ioremap
* Remove suspend/resume functions as not needed
v4:
* Remove the ID property in DT
* Remove the temporary PHY direct function call and use PHY function
* Change printk to pr_debug
* Move the IOB flush addresses into the DT
* Remove the parameters retrieval function as no longer needed
* Remove the header file as no longer needed
* Require v2 patch of the SATA PHY driver. Require slightly modification
in the Kconfig as it is moved to folder driver/phy and use Kconfig
PHY_XGENE_SATA instead SATA_XGENE_PHY.
v3:
* Move out the SATA PHY to another driver
* Remove the clock-cells entry from DTS
* Remove debug wrapper
* Remove delay functions wrapper
* Clean up resource and IRQ query
* Remove query clock name
* Switch to use dma_set_mask/dma_coherent_mask
* Remove un-necessary devm_kfree
* Update GPL license header to v2
* Spilt up function xgene_ahci_hardreset
* Spilt up function xgene_ahci_probe
* Remove all reference of CONFIG_ARCH_MSLIM
* Clean up chip revision code
v2:
* Clean up file sata_xgene.c with Lindent and etc
* Clean up file sata_xgene_serdes.c with Lindent and etc
* Add description to each patch
v1:
* inital version
Signed-off-by: Loc Ho <lho@xxxxxxx>
Signed-off-by: Tuan Phan <tphan@xxxxxxx>
Signed-off-by: Suman Tripathi <stripathi@xxxxxxx>
---
Loc Ho (3):
Documentation: Add documentation for APM X-Gene SoC SATA host
controller DTS binding
ata: Add APM X-Gene SoC AHCI SATA host controller driver
arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
.../devicetree/bindings/ata/apm-xgene.txt | 70 +++
arch/arm64/boot/dts/apm-storm.dtsi | 75 +++
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci_xgene.c | 540 ++++++++++++++++++++
5 files changed, 694 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt
create mode 100644 drivers/ata/ahci_xgene.c
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
