Hi Tejun, > > On Thu, Feb 13, 2014 at 03:28:01PM -0800, Loc Ho wrote: >> 1. There are a number of errata that require workaround. Some can be >> fixed by adding broken flags while others are better to just wrap >> around the existent libahci library routines and not overly polluting >> the libahci routines. >> 2. There are additional controller programming sequences to configure. >> 2a. By default, RAM are powered down and require brought out of shutdown. >> 2b. The controller has an additional corresponding PHY part that needs >> to be programmed after PHY configuration. > > Have you looked at the latest patchset Hans posted? He added multiple > PHY support and split up init to three steps so that each platform > driver can mix and match as they see fit. Looking at xgene driver, > sure there are things specific to the driver but there also are > non-insignificant amount of boilerplate code and that's what I'm > primarily concerned about. It may be okay when you have two or three > drivers duplicating some code but it looks like we could have many > more and I *really* want to avoid the situation where the same piece > of code is copied over N times. In addition, frankly, not many people > except yourself would care about these drivers once they're merged and > many of these are gonna be painful to test making later refactoring a > lot harder. > Ok... I will look into Hans' patch again. To be sure that I am looking at the correct patch, are you referring to this one: http://www.spinics.net/lists/linux-ide/msg47628.html -Loc -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
