Re: LSI SAS2008 SATA TRIM not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2014-02-07 at 15:44 -0500, Martin K. Petersen wrote:
> >>>>> "Kurt" == Kurt Miller <kurt@xxxxxxxxxxxxxxxxxxxxx> writes:
> 
> Kurt> Is TRIM working for anyone using LSI SAS2008 controllers?
> 
> Yes. But its SAT appears to be somewhat selective about which devices it
> flags as capable.
> 
> Please send me the output of:
> 
> # sg_readcap -l /dev/sdc
> # sg_vpd -p bl /dev/sdc
> # sg_vpd -p lbpv /dev/sdc
> 

Hi Martin,

Thank you for your reply. Below is the output you requested. Note that
when the EVO's are connected to a SATA AHCI port on my desktop
motherboard, TRIM works okay. Please let me know if you need additional
information.

Regards,
-Kurt

# sg_readcap -l /dev/sdc
Read Capacity results:
   Protection: prot_en=0, p_type=0, p_i_exponent=0
   Logical block provisioning: lbpme=0, lbprz=0
   Last logical block address=976773167 (0x3a38602f), Number of logical
blocks=976773168
   Logical block length=512 bytes
   Logical blocks per physical block exponent=0
   Lowest aligned logical block address=0
Hence:
   Device size: 500107862016 bytes, 476940.0 MiB, 500.11 GB

# sg_vpd -p bl /dev/sdc
Block limits VPD page (SBC):
  Write same no zero (WSNZ): 0
  Maximum compare and write length: 0 blocks
  Optimal transfer length granularity: 0 blocks
  Maximum transfer length: 0 blocks
  Optimal transfer length: 0 blocks
  Maximum prefetch length: 0 blocks
  Maximum unmap LBA count: 0
  Maximum unmap block descriptor count: 0
  Optimal unmap granularity: 0
  Unmap granularity alignment valid: 0
  Unmap granularity alignment: 0
  Maximum write same length: 0x0 blocks

# sg_vpd -p lbpv /dev/sdc
Logical block provisioning VPD page (SBC):
  Unmap command supported (LBPU): 0
  Write same (16) with unmap bit supported (LBWS): 0
  Write same (10) with unmap bit supported (LBWS10): 0
  Logical block provisioning read zeros (LBPRZ): 0
  Anchored LBAs supported (ANC_SUP): 0
  Threshold exponent: 0
  Descriptor present (DP): 0
  Provisioning type: 0


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux