Hello! When booting, after loading the initrd and progressing with device detection, the kernel will usually stop continuing and instead repeatedly output (with varying type and page parameters): mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000 mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000 mptbase: ioc0: Initiating recovery It will not recover from that state. It appears that if I let the kernel continue until it reaches: WARNING: CPU: 1 PID: 17 at /usr/src/linux-3.12.8-gentoo/mm/page_alloc.c:2483 __alloc_pages_nodemask+0x460/0x1180() [...] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed (the SCSI devices will still not be accessible) and then hard-reset the machine, it will successfully boot on the next try. [4.] Kernel information [4.1.] Kernel version: The latest version that shows the problem is 3.12.8. [4.2.] Kernel .config file: Please find the config for 3.12.8-gentoo attached. The same issue appears with all vanilla kernels in the range I tested, so I am confident the Gentoo patches are not causing this. [5.] Most recent kernel version which did not have the bug: Both problems first appeared with Linux 3.9.10 after updating from 3.8.10. Since then I tested 3.10.8 and onward and 3.12.2 and newer and all suffer from this problem. [6.] Output of Oops: Please find the complete boot logs (and configs) for version 3.9.10 at following bugreports: https://bugzilla.kernel.org/show_bug.cgi?id=60566 https://bugzilla.kernel.org/show_bug.cgi?id=60567 The boot log for a hang situation with 3.12.8-gentoo is attached. [8.] Environment [8.1.] Software: # /usr/src/linux-3.12.8-gentoo/scripts/ver_linux Linux maroon 3.12.8-gentoo #1 SMP Mon Jan 20 19:23:32 CET 2014 ia64 McKinley GenuineIntel GNU/Linux Gnu C 4.7.3 Gnu make 3.82 binutils 2.23.2 util-linux 2.22.2 mount debug module-init-tools 15 e2fsprogs 1.42.7 Linux C Library 2.17 Dynamic linker (ldd) 2.17 Procps 3.3.8 Net-tools 1.60_p20120127084908 Kbd 1.15.5 Sh-utils 8.21 Modules Loaded nfsd auth_rpcgss oid_registry nfs_acl lockd sunrpc veth bridge stp llc iptable_mangle ipt_REJECT iptable_filter ipt_MASQUERADE xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables xt_tcpudp xt_comment ip6t_REJECT xt_LOG nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables ipmi_watchdog ipmi_poweroff ipmi_devintf rtc_efi ipv6 tg3 ptp pps_core processor thermal ohci_pci libphy ohci_hcd thermal_sys ipmi_si ipmi_msghandler e100 hwmon mii button efivarfs ext3 mbcache jbd sd_mod crc_t10dif crct10dif_common ata_generic pata_cmd64x libata ehci_pci ehci_hcd mptspi scsi_transport_spi mptscsih usbcore mptbase scsi_mod usb_common dm_mirror dm_region_hash dm_log dm_mod unix Please note that due to another bug, I had to compile the kernel with GCC 4.5.4 instead of version 4.7.3, which ver_linux mentions. https://bugzilla.kernel.org/show_bug.cgi?id=54251 [8.2.] Processor information: # cat /proc/cpuinfo processor : 0 vendor : GenuineIntel arch : IA-64 family : 31 model : 0 model name : McKinley revision : 7 archrev : 0 features : branchlong cpu number : 0 cpu regs : 4 cpu MHz : 900.000 itc MHz : 900.000000 BogoMIPS : 1345.12 siblings : 1 physical id: 0 processor : 1 vendor : GenuineIntel arch : IA-64 family : 31 model : 0 model name : McKinley revision : 7 archrev : 0 features : branchlong cpu number : 0 cpu regs : 4 cpu MHz : 900.000 itc MHz : 900.000000 BogoMIPS : 1345.12 siblings : 1 physical id: 3 [8.3.] Module information: # cat /proc/modules nfsd 600368 13 - Live 0xa000000202478000 auth_rpcgss 116103 1 nfsd, Live 0xa000000202380000 oid_registry 3779 1 auth_rpcgss, Live 0xa000000202340000 nfs_acl 6783 1 nfsd, Live 0xa000000202328000 lockd 144103 1 nfsd, Live 0xa0000002022ec000 sunrpc 442419 22 nfsd,auth_rpcgss,nfs_acl,lockd, Live 0xa000000202224000 veth 9367 0 - Live 0xa000000202174000 bridge 234513 0 - Live 0xa0000002020fc000 stp 3357 1 bridge, Live 0xa000000202098000 llc 8825 2 bridge,stp, Live 0xa000000202080000 iptable_mangle 3024 0 - Live 0xa00000020204c000 ipt_REJECT 5977 7 - Live 0xa000000202024000 iptable_filter 2560 1 - Live 0xa000000201fe4000 ipt_MASQUERADE 3394 1 - Live 0xa000000201fbc000 xt_nat 3129 5 - Live 0xa000000201fa4000 iptable_nat 6126 1 - Live 0xa000000201f84000 nf_conntrack_ipv4 16040 38 - Live 0xa000000201f6c000 nf_defrag_ipv4 2379 1 nf_conntrack_ipv4, Live 0xa000000201f50000 nf_nat_ipv4 8008 1 iptable_nat, Live 0xa000000201f38000 nf_nat 25960 4 ipt_MASQUERADE,xt_nat,iptable_nat,nf_nat_ipv4, Live 0xa000000201f1c000 ip_tables 25159 3 iptable_mangle,iptable_filter,iptable_nat, Live 0xa000000201ef8000 xt_tcpudp 4031 59 - Live 0xa000000201ec8000 xt_comment 1147 86 - Live 0xa000000201eb0000 ip6t_REJECT 7236 7 - Live 0xa000000201e98000 xt_LOG 24166 11 - Live 0xa000000201e7c000 nf_conntrack_ipv6 17003 18 - Live 0xa000000201e58000 nf_defrag_ipv6 32193 1 nf_conntrack_ipv6, Live 0xa000000201e38000 xt_conntrack 6225 55 - Live 0xa000000201dfc000 nf_conntrack 136043 7 ipt_MASQUERADE,iptable_nat,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat,nf_conntrack_ipv6,xt_conntrack, Live 0xa000000201dbc000 ip6table_filter 2396 1 - Live 0xa000000201d68000 ip6_tables 25131 1 ip6table_filter, Live 0xa000000201d4c000 x_tables 29127 13 iptable_mangle,ipt_REJECT,iptable_filter,ipt_MASQUERADE,xt_nat,ip_tables,xt_tcpudp,xt_comment,ip6t_REJECT,xt_LOG,xt_conntrack,ip6table_filter,ip6_tables, Live 0xa000000201d28000 ipmi_watchdog 27631 0 - Live 0xa000000201b58000 ipmi_poweroff 13273 0 - Live 0xa000000201b34000 ipmi_devintf 16041 0 - Live 0xa000000201b18000 rtc_efi 5066 0 - Live 0xa000000201afc000 ipv6 703198 80 bridge,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6, Live 0xa000000201a2c000 tg3 399565 0 - Live 0xa00000020184c000 ptp 19724 1 tg3, Live 0xa00000020172c000 pps_core 18816 1 ptp, Live 0xa0000002016e4000 processor 40773 0 - Live 0xa0000002016b4000 thermal 18760 0 - Live 0xa0000002016a0000 ohci_pci 5320 0 - Live 0xa000000201658000 libphy 45865 1 tg3, Live 0xa000000201608000 ohci_hcd 55066 1 ohci_pci, Live 0xa0000002015a8000 thermal_sys 45028 2 processor,thermal, Live 0xa000000201560000 ipmi_si 100422 1 - Live 0xa000000201538000 ipmi_msghandler 77925 4 ipmi_watchdog,ipmi_poweroff,ipmi_devintf,ipmi_si, Live 0xa0000002014bc000 e100 76192 0 - Live 0xa000000201430000 hwmon 2281 2 tg3,thermal_sys, Live 0xa0000002013f8000 mii 9163 1 e100, Live 0xa000000201388000 button 9619 0 - Live 0xa000000201370000 efivarfs 13525 0 [permanent], Live 0xa000000201354000 ext3 308485 10 - Live 0xa0000002012bc000 mbcache 14827 1 ext3, Live 0xa00000020123c000 jbd 129221 1 ext3, Live 0xa000000201200000 sd_mod 85888 5 - Live 0xa000000201164000 crc_t10dif 1711 1 sd_mod, Live 0xa0000002010f4000 crct10dif_common 1420 1 crc_t10dif, Live 0xa0000002010c4000 ata_generic 6122 0 - Live 0xa0000002010a4000 pata_cmd64x 12658 0 - Live 0xa000000201088000 libata 367183 2 ata_generic,pata_cmd64x, Live 0xa000000201000000 ehci_pci 7864 0 - Live 0xa000000200ff0000 ehci_hcd 101847 1 ehci_pci, Live 0xa000000200fbc000 mptspi 30807 3 - Live 0xa000000200f5c000 scsi_transport_spi 49824 1 mptspi, Live 0xa000000200ef4000 mptscsih 42354 1 mptspi, Live 0xa000000200e90000 usbcore 358114 4 ohci_pci,ohci_hcd,ehci_pci,ehci_hcd, Live 0xa000000200bb4000 mptbase 126776 2 mptspi,mptscsih, Live 0xa000000200b84000 scsi_mod 214641 5 sd_mod,libata,mptspi,scsi_transport_spi,mptscsih, Live 0xa000000200b00000 usb_common 1800 1 usbcore, Live 0xa000000200a08000 dm_mirror 32174 0 - Live 0xa0000002009ec000 dm_region_hash 16287 1 dm_mirror, Live 0xa0000002009c8000 dm_log 20860 2 dm_mirror,dm_region_hash, Live 0xa0000002009a8000 dm_mod 191817 32 dm_mirror,dm_log, Live 0xa000000200954000 unix 66715 59 - Live 0xa0000002008e8000 [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) # cat /proc/ioports 00000000-000003af : PCI Bus 0000:00 000003b0-000003df : PCI Bus 0000:e0 000003c0-000003df : vga+ 000003e0-00001fff : PCI Bus 0000:00 00000d00-00000d3f : 0000:00:03.0 00000d00-00000d3f : e100 00000d40-00000d4f : 0000:00:02.0 00000d50-00000d57 : 0000:00:02.0 00000d58-00000d5f : 0000:00:02.0 00000d60-00000d63 : 0000:00:02.0 00000d64-00000d67 : 0000:00:02.0 00002000-00002fff : PCI Bus 0000:20 00002000-000020ff : 0000:20:01.1 00002000-000020ff : mpt 00002100-000021ff : 0000:20:01.0 00002100-000021ff : mpt 00003000-00005fff : PCI Bus 0000:40 00006000-00007fff : PCI Bus 0000:60 00008000-0000bfff : PCI Bus 0000:80 0000c000-0000dfff : PCI Bus 0000:c0 0000e000-0000ffff : PCI Bus 0000:e0 0000e000-0000e0ff : 0000:e0:02.0 # cat /proc/iomem 00000000-00000fff : System RAM 00001000-0009ffff : System RAM 000a0000-000fffff : PCI Bus 0000:e0 000c0000-000fffff : reserved 00100000-03ffffff : System RAM 04000000-04dcefff : System RAM 04000000-047618bf : Kernel code 047618c0-04b284af : Kernel data 04b284b0-04dce0d7 : Kernel bss 04dcf000-3f5e3fff : System RAM 3f5e4000-3fabffff : reserved 3fac0000-3fafffff : reserved 3fb00000-3fb0ffff : System RAM 3fb10000-3fb2bfff : System RAM 3fb2c000-3fb37fff : reserved 3fb38000-3fffffff : reserved 80000000-8fffffff : PCI Bus 0000:00 80000000-8001ffff : 0000:00:03.0 80000000-8001ffff : e100 80020000-80020fff : 0000:00:03.0 80020000-80020fff : e100 80021000-800210ff : 0000:00:01.2 80022000-80022fff : 0000:00:01.1 80022000-80022fff : ohci_hcd 80023000-80023fff : 0000:00:01.0 80023000-80023fff : ohci_hcd 90000000-97ffffff : PCI Bus 0000:20 90000000-903fffff : 0000:20:01.1 90400000-907fffff : 0000:20:01.0 90800000-9080ffff : 0000:20:02.0 90800000-9080ffff : tg3 90810000-9081ffff : 0000:20:01.1 90810000-9081ffff : mpt 90820000-9082ffff : 0000:20:01.1 90820000-9082ffff : mpt 90830000-9083ffff : 0000:20:01.0 90830000-9083ffff : mpt 90840000-9084ffff : 0000:20:01.0 90840000-9084ffff : mpt 98000000-afffffff : PCI Bus 0000:40 98010000-9801ffff : 0000:40:01.0 98010000-9801ffff : tg3 b0000000-c7ffffff : PCI Bus 0000:60 c8000000-dfffffff : PCI Bus 0000:80 e0000000-efffffff : PCI Bus 0000:c0 f0000000-fdffffff : PCI Bus 0000:e0 f0000000-f7ffffff : 0000:e0:02.0 f8000000-f801ffff : 0000:e0:02.0 f8020000-f803ffff : 0000:e0:01.1 f8040000-f804ffff : 0000:e0:02.0 f8050000-f8050fff : 0000:e0:01.1 f8050000-f8050007 : serial f8051000-f805100f : 0000:e0:01.0 f8051000-f8051007 : serial ff5b0ca2-ff5b0ca3 : ipmi_si ff5c1004-ff5c1007 : ACPI PM_TMR ff5c1008-ff5c100b : ACPI PM1a_EVT_BLK ff5c100c-ff5c100d : ACPI PM1a_CNT_BLK ff5c1010-ff5c1013 : ACPI GPE0_BLK ff5c1014-ff5c1017 : ACPI GPE1_BLK ff5e0000-ff5e0007 : PCI Bus 0000:20 ff5e0000-ff5e0007 : serial ff5e2000-ff5e2007 : PCI Bus 0000:20 ff5e2000-ff5e2007 : serial 4040000000-40667f4fff : System RAM 40667f5000-40667f5fff : reserved 40667f6000-40be6f3fff : System RAM 40be6f4000-40be6fdfff : System RAM 40be6f4008-40be6f4788 : EFI Memory Map 40be6f8008-40be6f8058 : Boot parameter 40be6fe000-40be6fefff : System RAM 40be6ff000-40bef97fff : System RAM 40bef98000-40bef99fff : System RAM 40bef9a000-40bef9bfff : System RAM 40bef9c000-40bef9cfff : System RAM 40bef9d000-40beffdfff : System RAM 40beffe000-40bf2f1fff : System RAM 40bf2f2000-40bf800fff : System RAM 40bf801000-40bf805fff : System RAM 40bf806000-40bf9f9fff : System RAM 40bf9fa000-40bf9fafff : System RAM 40bf9fb000-40bf9fdfff : System RAM 40bf9fe000-40bfd67fff : System RAM 40bfd68000-40bfda3fff : reserved 40bfda4000-40bfdfdfff : System RAM 40bfdfe000-40bfe0ffff : System RAM 40bfe10000-40bfe7dfff : reserved 40bfe7e000-40bffb5fff : System RAM 40bffb6000-40bfffffff : reserved 80004000000-80103fffffe : PCI Bus 0000:00 90004000000-90103fffffe : PCI Bus 0000:20 a0004000000-a0103fffffe : PCI Bus 0000:40 b0004000000-b0103fffffe : PCI Bus 0000:60 c0004000000-c0103fffffe : PCI Bus 0000:80 e0004000000-e0103fffffe : PCI Bus 0000:c0 f0004000000-f0103fffffe : PCI Bus 0000:e0 3fffffc000000-3fffffc0eb3af : PCI Bus 0000:00 I/O Ports 00000000-000003af 3fffffc0ec3b0-3fffffc0f73df : PCI Bus 0000:e0 I/O Ports 000003b0-000003df 3fffffc0f83e0-3fffffc7fffff : PCI Bus 0000:00 I/O Ports 000003e0-00001fff 3fffffc800000-3fffffcbfffff : PCI Bus 0000:20 I/O Ports 00002000-00002fff 3fffffcc00000-3fffffd7fffff : PCI Bus 0000:40 I/O Ports 00003000-00005fff 3fffffd800000-3fffffdffffff : PCI Bus 0000:60 I/O Ports 00006000-00007fff 3fffffe000000-3fffffeffffff : PCI Bus 0000:80 I/O Ports 00008000-0000bfff 3ffffff000000-3ffffff7fffff : PCI Bus 0000:c0 I/O Ports 0000c000-0000dfff 3ffffff800000-3ffffffffffff : PCI Bus 0000:e0 I/O Ports 0000e000-0000ffff [8.5.] PCI information: Please find the output of lspci -vvv attached. [8.6.] SCSI information: There is no /proc/scsi/scsi on my system. I hope this information is sufficient to allow you to debug and fix the problem. If not, please do not hesitate to contact me. Should you be the wrong persons to contact about this issue, please forward me to the correct maintainers. Best regards, Dennis
Attachment:
config-3.12.8-gentoo
Description: Binary data
00:01.0 USB controller: NEC Corporation OHCI USB Controller (rev 41) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at 80023000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:01.1 USB controller: NEC Corporation OHCI USB Controller (rev 41) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes Interrupt: pin B routed to IRQ 52 Region 0: Memory at 80022000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:01.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: NEC Corporation uPD72010x USB 2.0 Controller Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 53 Region 0: Memory at 80021000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel modules: ehci_pci 00:02.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at 0d58 [size=8] Region 1: I/O ports at 0d64 [size=4] Region 2: I/O ports at 0d50 [size=8] Region 3: I/O ports at 0d60 [size=4] Region 4: I/O ports at 0d40 [size=16] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=3 PME- Kernel modules: pata_cmd64x, ata_generic 00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0d) Subsystem: Hewlett-Packard Company Device 1274 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (2000ns min, 14000ns max) Interrupt: pin A routed to IRQ 58 Region 0: Memory at 80020000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 0d00 [size=64] Region 2: Memory at 80000000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 Kernel modules: e100 20:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: LSI Logic / Symbios Logic Device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 56 Region 0: I/O ports at 2100 [size=256] Region 1: Memory at 90840000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at 90830000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 90400000 [disabled] [size=4M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: mptspi Kernel modules: mptspi 20:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: LSI Logic / Symbios Logic Device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes Interrupt: pin B routed to IRQ 57 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at 90820000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at 90810000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 90000000 [disabled] [size=4M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: mptspi Kernel modules: mptspi 20:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) Subsystem: Hewlett-Packard Company Core Lan 1000Base-T Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 192 (16000ns min), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 59 Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme Gigabit Ethernet Controller Read-only fields: [PN] Part number: BCM95700A6 [EC] Engineering changes: 106679-15 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 26 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 906104051d4f1034 Data: 89ac Kernel driver in use: tg3 Kernel modules: tg3 40:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) Subsystem: Hewlett-Packard Company 1000Base-SX (PCI) [A7073A] Physical Slot: 3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 192 (16000ns min), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 60 Region 0: Memory at 98010000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: PCI 1000Base-SX Ethernet Adapter Read-only fields: [PN] Part number: A6847-60101 [EC] Engineering changes: C-4230 [SN] Serial number: HVDR2B2EBA [MN] Manufacture ID: 31 30 33 43 [V0] Vendor specific: N/A [RV] Reserved: checksum bad, 36 byte(s) reserved Read/write fields: [YA] Asset tag: N/A [V1] Vendor specific: N/A [RW] Read-write area: 109 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 3fd7fddf479ffaf8 Data: f4f5 Kernel driver in use: tg3 Kernel modules: tg3 e0:01.0 Communication controller: Hewlett-Packard Company Auxiliary Diva Serial Port (rev 01) Subsystem: Hewlett-Packard Company Diva SP2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 54 Region 2: Memory at f8051000 (32-bit, non-prefetchable) [size=16] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: serial e0:01.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company Everest SP2 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 54 Region 0: Memory at f8050000 (32-bit, non-prefetchable) [size=4K] Region 2: Memory at f8020000 (32-bit, prefetchable) [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: serial e0:02.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV100 [Radeon 7000 / Radeon VE] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 12ab Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (2000ns min), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 255 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=256] Region 2: Memory at f8040000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
VGA BIOS: 1002 5159 0708
0 0 0x00024D 0x0000000000000000 platform check post io
***********************************************************
CPU 0 present and active
Vendor = "GenuineIntel"
Serial# = 0001cb10bf1eac86
Version = 0x001f000704 (B3 McKinley)
CPU 1 present and active
Vendor = "GenuineIntel"
Serial# = 0000ffcb6706bb6b
Version = 0x001f000704 (B3 McKinley)
PAL flags = 0x0:
Cpu/bus ratio = 9:2 memory/bus ratio = 4:3 Plat Freq = 200MHz
Pluto Rev : 2.2
Meson Rev : 7
Dillon Rev : 2
Fru Device Inventory :
Motherboard : device = 0x00 Present
I/O Backplane : device = 0x05 Present
CSM(ECI) Card : device = 0x06 Present
Power Supply 1 : device = 0x41 Not Present
Power Supply 2 : device = 0x42 Not Present
ROM revisions :verscode: 02.31.fwbtr_main_view
datecode: 4411
built with: makerom -V=2.31 -O -C on Thu Mar 11 16:13:03 MST 2004
ROM : Official Build
2.31 - rx2600/zx2000/zx6000 System Firmware
PAL_A Generic Version : 07.31 Family 31 Model 1
PAL_B Version : 05.65 Family 31 Model 1
PAL_B Version : 07.59 Family 31 Model 0
PAL_A Specific Version : 07.31 Family 31 Model 0
PAL_A Specific Version : 05.37 Family 31 Model 1
PAL_A Specific Active Version : 07.31
PAL_B Active Version : 07.59
SAL A Version : 02.00
SAL B Version : 02.31
SAL NVM Rev : 14.00
ACPI Version : 07.00
ACPI Tables : 2.0
ACPI Methods : 1.0b
EFI Version : 01.22
EFI Spec Rev : 01.10
EFI Intel Drop : 14.61
POSSE Rev : 00.10
EFI NVM Rev : 07.00
SMBIOS Version : 2.3.2a
IPMI Version : 01.00
BMC Rev : 01.53
MP Rev : E.03.32
***********************************************************
1 0 0x0000A4 0x0000000000000000 start memory discovery
0 0 0x0000A8 0x0000000000000000 destructive memory test
1 0 0x0000FB 0x0000000000000000 initialize memory only (don't test)
0 0 0x0000C4 0x0000000000000000 starting memory initialization
0 0 0x0000C5 0x0000000000000021 memory initialization 33% complete
0 0 0x0000C5 0x000000000000003E memory initialization 62% complete
0 0 0x0000C5 0x000000000000005F memory initialization 95% complete
0 0 0x0000A5 0x0000000000000000 exit memory discovery
0 1 0x00005E 0x000000000000660C CPU1 received wake up
0 1 0x000060 0x0000000000000001 CPU1 at rendezvous stage 2
0 1 0x00005E 0x0000000000000257 CPU1 received wake up
0 1 0x000061 0x0000000000000001 CPU1 at rendezvous stage 3
0 0 0x00024E 0x0000000000000000 final platform check
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
0 0 0x000012 0x0000000000000000 relocating PAL
0 0 0x000013 0x0000000000000000 relocating SAL
0 0 0x00000F 0x0000000000000000 building ACPI tables
0 0 0x000007 0x0000000000000000 building System Tables
0 0 0x000010 0x0000000000000000 relocating EFI
0 0 0x000011 0x0000000000000000 relocating IVT
526: 0x80000000ffda0000
529: 0x00000000ffd1c1a0
532: 0x00000000ffe50000
535: 0x00000000fff62970
538: 0x00000000ff800000
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
EFI loaded in RAM from 0x3f5e4000 to 0x3f92fc2f
Load EFI symbols at 0x3f5ea350
SAL loaded in RAM from 0x3f930000 to 0x3fabffff
Load SAL symbols at 0x3f2e0000
PAL loaded in RAM from 0x3fac0000 to 0x3fafffff
0 1 0x00005E 0x0000000000000240 CPU1 received wake up
0 1 0x0002AF 0x000000000000001F Setting Processor Response Timeout
0 1 0x000058 0x0000000000000001 CPU1 at final rendezvous
EFI Memory Table Validation!
Checking entry linkage consistency!
Memory < 1gb
000 0x04 0x0000000000000000 0x00000001
001 0x07 0x0000000000001000 0x0000009f
002 0x0b 0x00000000000a0000 0x00000020
003 0x05 0x00000000000c0000 0x00000040
004 0x07 0x0000000000100000 0x0003f4e4
005 0x05 0x000000003f5e4000 0x0000034c
006 0x05 0x000000003f930000 0x00000190
007 0x0d 0x000000003fac0000 0x00000040
008 0x07 0x000000003fb00000 0x0000002c
009 0x09 0x000000003fb2c000 0x00000002
010 0x09 0x000000003fb2e000 0x0000000a
011 0x06 0x000000003fb38000 0x000004c8
LMMIO & PDH Space
012 0x0b 0x0000000080000000 0x0007e000
013 0x0b 0x00000000fed00000 0x00001300
Relocated LMMIO Memory
014 0x07 0x0000004040000000 0x000267f5
015 0x08 0x00000040667f5000 0x00000001
016 0x07 0x00000040667f6000 0x0005980a
GMMIO, IO Port Space & Sherpa CSRs [if present] )
017 0x0b 0x0000080000000000 0x80000000
018 0x0c 0x0003fffffc000000 0x00004000
Checking memory size consistency!
Active Memory = 0x00000000c0000000 Mdt Memory = 0x00000000c0000000
Checking entry counts!
Actual Entries = 19 SAL Data entries = 19
ACPIDataStart = 0x003fb2e000
HCDPDataStart = 0x003fb2c000
1 0 0x000207 0x00000000000E003D CPU0 starting EFI
0 0 0x0002B9 0x00000000000000AF EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x00000000000000F2 EFI POST code
0 0 0x0002B9 0x0000000000000001 EFI POST code
0 0 0x0002B9 0x0000000000000002 EFI POST code
0 0 0x0002B9 0x0000000000000003 EFI POST code
0 0 0x0002B9 0x0000000000000004 EFI POST code
0 0 0x0002B9 0x0000000000000004 EFI POST code
0 0 0x0002B9 0x0000000000000005 EFI POST code
0 0 0x0002B9 0x0000000000000006 EFI POST code
0 0 0x0002B9 0x0000000000000007 EFI POST code
0 0 0x0002B9 0x0000000000000008 EFI POST code
0 0 0x0002B9 0x0000000000000009 EFI POST code
0 0 0x0002B9 0x000000000000000A EFI POST code
0 0 0x0002B9 0x000000000000000B EFI POST code
0 0 0x0002B9 0x000000000000000E EFI POST code
0 0 0x000C53 0x0000000080000000 EFI debug level
0 0 0x0002B9 0x000000000000000F EFI POST code
0 0 0x0002B9 0x0000000000000010 EFI POST code
0 0 0x0002B9 0x0000000000000011 EFI POST code
0 0 0x0002B9 0x0000000000000012 EFI POST code
POSSE Library version 0.10 is loading...
CellularPlatform = FALSE (use "setcell" to toggle)
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF zx6000/rx2600/zx2000 1.22 [Thu Mar 11 14:22:35 2004] - HP
0 0 0x0002B9 0x0000000000000013 EFI POST code
Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7
Loading 'FPSWA'...
Loading 'lsi1030'...
Loading 'gigundi'...
0 0 0x0002B9 0x0000000000000014 EFI POST code
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
0 0 0x000318 0x0000000000000030 EFI security system initialized
0 0 0x0002B9 0x0000000000000015 EFI POST code
Scsi(Pun0,Lun0) HP 36.4GMAN3367MC HP07 (160 MBytes/sec)
Scsi(Pun1,Lun0) HP 36.4GMAN3367MC HP07 (160 MBytes/sec)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411]
Loading device drivers
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411]
Please select a boot option
Gentoo/Linux
EFI Shell [Built-in]
dvd
Boot Option Maintenance Menu
System Configuration Menu
Use â?? and â?? to change option(s). Use Enter to select an option
Loading.: Gentoo/Linux
Starting: Gentoo/Linux
ELILO v3.12 for EFI/IA-64
..
Uncompressing Linux... done
Loading file \EFI\gentoo\root\kernel\initramfs-3.12.8-gentoo.img...done
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.8-gentoo (root@maroon) (gcc version 4.5.4 (Gentoo Hardened 4.5.4 p1.2, pie-0.4.7) ) #1 SMP Mon Jan 20 19:23:32 CET 2014
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] Early serial console at MMIO 0xf8050000 (options '9600n8')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 0009C (v01 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb369e0 000F4 (v03 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 32/16 (20130725/tbfadt-572)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 32/16 (20130725/tbfadt-572)
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP rx2600 00000007 INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb36ad8 00040
[ 0.000000] ACPI: SPCR 000000003fb36b18 00050 (v01 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb36b68 00034 (v01 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb36c28 000C0 (v01 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb36ba0 00050 (v04 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb36bf0 00034 (v01 HP rx2600 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 001D6 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33a50 00342 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33da0 00A16 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb347c0 00A16 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb351e0 00A16 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb35c00 00A16 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36620 001D8 (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36800 000EB (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb368f0 000EF (v01 HP rx2600 00000006 INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe0000040be6ff000 (8982276 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7580000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x40bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x01000000-0x3f5e3fff]
[ 0.000000] node 0: [mem 0x3fb00000-0x3fb2bfff]
[ 0.000000] node 0: [mem 0x4040000000-0x40667f3fff]
[ 0.000000] node 0: [mem 0x40667f8000-0x40bfd67fff]
[ 0.000000] node 0: [mem 0x40bfda4000-0x40bfe0ffff]
[ 0.000000] node 0: [mem 0x40bfe80000-0x40bffb3fff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 136872
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=scsi0:/EFI/gentoo/root/kernel/vmlinuz-3.12.8-gentoo root=/dev/sda2 rd.lvm.lv=maroon/usr ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] allocated 271564496 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2809888K/3118160K available (7558K kernel code, 929K rwdata, 776K rodata, 912K init, 2711K bss, 308272K reserved)
[ 0.000000] Leaving McKinley Errata 9 workaround enabled
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1024
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:1024
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
[ 0.000000] Console: colour VGA+ 80x25
[ 0.010000] Calibrating delay loop... 1345.12 BogoMIPS (lpj=6725632)
[ 0.030113] pid_max: default: 32768 minimum: 301
[ 0.030431] Security Framework initialized
[ 0.031209] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.036111] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.041007] Mount-cache hash table entries: 1024
[ 0.042962] Initializing cgroup subsys memory
[ 0.047898] Initializing cgroup subsys devices
[ 0.048048] Initializing cgroup subsys freezer
[ 0.048190] Initializing cgroup subsys blkio
[ 0.050105] ACPI: Core revision 20130725
[ 0.055452] ACPI: All ACPI Tables successfully acquired
[ 0.060483] Boot processor id 0x0/0x0
[ 0.000000] Fixed BSP b0 value from CPU 1
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 435 cycles)
[ 0.070075] Brought up 2 CPUs
[ 0.070176] Total of 2 processors activated (2690.25 BogoMIPS).
[ 0.079295] devtmpfs: initialized
[ 0.080206] SMBIOS 2.3 present.
[ 0.081030] NET: Registered protocol family 16
[ 0.090967] ACPI: bus type PCI registered
[ 0.097892] bio: create slab <bio-0> at 0
[ 0.098596] ACPI: Added _OSI(Module Device)
[ 0.098596] ACPI: Added _OSI(Processor Device)
[ 0.099809] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.099960] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.620148] ACPI: Interpreter enabled
[ 1.620276] ACPI: (supports S0 S5)
[ 1.620384] ACPI: Using IOSAPIC for interrupt routing
[ 1.625909] ACPI: No dock devices found.
[ 18.560333] IOC: zx1 2.2 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 19.323867] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[ 19.324067] acpi HWP0002:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 19.324530] acpi HWP0002:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 20.683872] acpi HWP0002:00: host bridge window [io 0x0000-0x03af]
[ 20.684071] acpi HWP0002:00: host bridge window [io 0x03e0-0x1fff]
[ 20.684539] acpi HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff]
[ 20.684760] acpi HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe]
[ 20.697418] PCI host bridge to bus 0000:00
[ 20.697418] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 20.700011] pci_bus 0000:00: root bus resource [io 0x03e0-0x1fff]
[ 20.700209] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 20.707741] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x80103fffffe]
[ 20.710010] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 21.433866] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
[ 21.434063] acpi HWP0002:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 21.434527] acpi HWP0002:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 22.793866] acpi HWP0002:01: host bridge window [mem 0xff5e0000-0xff5e0007]
[ 22.794082] acpi HWP0002:01: host bridge window [mem 0xff5e2000-0xff5e2007]
[ 22.794525] acpi HWP0002:01: host bridge window [io 0x2000-0x2fff]
[ 22.794727] acpi HWP0002:01: host bridge window [mem 0x90000000-0x97ffffff]
[ 22.800010] acpi HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe]
[ 22.814978] PCI host bridge to bus 0000:20
[ 22.814978] pci_bus 0000:20: root bus resource [io 0x2000-0x2fff]
[ 22.817480] pci_bus 0000:20: root bus resource [mem 0x90000000-0x97ffffff]
[ 22.817699] pci_bus 0000:20: root bus resource [mem 0x90004000000-0x90103fffffe]
[ 22.820010] pci_bus 0000:20: root bus resource [bus 20-3f]
[ 23.563864] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 40-5f])
[ 23.564061] acpi HWP0002:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 23.564524] acpi HWP0002:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 24.843850] acpi HWP0002:02: host bridge window [io 0x3000-0x5fff]
[ 24.844045] acpi HWP0002:02: host bridge window [mem 0x98000000-0xafffffff]
[ 24.844495] acpi HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe]
[ 25.460082] PCI host bridge to bus 0000:40
[ 25.460214] pci_bus 0000:40: root bus resource [io 0x3000-0x5fff]
[ 25.460407] pci_bus 0000:40: root bus resource [mem 0x98000000-0xafffffff]
[ 25.460842] pci_bus 0000:40: root bus resource [mem 0xa0004000000-0xa0103fffffe]
[ 25.468482] pci_bus 0000:40: root bus resource [bus 40-5f]
[ 27.053852] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 60-7f])
[ 27.054049] acpi HWP0002:03: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 27.054516] acpi HWP0002:03: Unable to request _OSC control (_OSC support mask: 0x08)
[ 28.253861] acpi HWP0002:03: host bridge window [io 0x6000-0x7fff]
[ 28.254056] acpi HWP0002:03: host bridge window [mem 0xb0000000-0xc7ffffff]
[ 28.254492] acpi HWP0002:03: host bridge window [mem 0xb0004000000-0xb0103fffffe]
[ 28.870082] PCI host bridge to bus 0000:60
[ 28.870212] pci_bus 0000:60: root bus resource [io 0x6000-0x7fff]
[ 28.870405] pci_bus 0000:60: root bus resource [mem 0xb0000000-0xc7ffffff]
[ 28.870850] pci_bus 0000:60: root bus resource [mem 0xb0004000000-0xb0103fffffe]
[ 28.877056] pci_bus 0000:60: root bus resource [bus 60-7f]
[ 30.153862] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 80-bf])
[ 30.154059] acpi HWP0002:04: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 30.154525] acpi HWP0002:04: Unable to request _OSC control (_OSC support mask: 0x08)
[ 31.353865] acpi HWP0002:04: host bridge window [io 0x8000-0xbfff]
[ 31.354061] acpi HWP0002:04: host bridge window [mem 0xc8000000-0xdfffffff]
[ 31.354499] acpi HWP0002:04: host bridge window [mem 0xc0004000000-0xc0103fffffe]
[ 31.970082] PCI host bridge to bus 0000:80
[ 31.970212] pci_bus 0000:80: root bus resource [io 0x8000-0xbfff]
[ 31.970404] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xdfffffff]
[ 31.970839] pci_bus 0000:80: root bus resource [mem 0xc0004000000-0xc0103fffffe]
[ 31.978339] pci_bus 0000:80: root bus resource [bus 80-bf]
[ 33.263863] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus c0-df])
[ 33.264059] acpi HWP0002:05: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 33.264522] acpi HWP0002:05: Unable to request _OSC control (_OSC support mask: 0x08)
[ 34.463860] acpi HWP0002:05: host bridge window [io 0xc000-0xdfff]
[ 34.464056] acpi HWP0002:05: host bridge window [mem 0xe0000000-0xefffffff]
[ 34.464487] acpi HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe]
[ 35.080082] PCI host bridge to bus 0000:c0
[ 35.080213] pci_bus 0000:c0: root bus resource [io 0xc000-0xdfff]
[ 35.080405] pci_bus 0000:c0: root bus resource [mem 0xe0000000-0xefffffff]
[ 35.080842] pci_bus 0000:c0: root bus resource [mem 0xe0004000000-0xe0103fffffe]
[ 35.088355] pci_bus 0000:c0: root bus resource [bus c0-df]
[ 36.613859] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus e0-ff])
[ 36.614056] acpi HWP0002:06: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 36.614515] acpi HWP0002:06: Unable to request _OSC control (_OSC support mask: 0x08)
[ 38.293855] acpi HWP0002:06: host bridge window [io 0x03b0-0x03df]
[ 38.294052] acpi HWP0002:06: host bridge window [io 0xe000-0xffff]
[ 38.294466] acpi HWP0002:06: host bridge window [mem 0x000a0000-0x000fffff]
[ 38.294684] acpi HWP0002:06: host bridge window [mem 0xf0000000-0xfdffffff]
[ 38.300011] acpi HWP0002:06: host bridge window [mem 0xf0004000000-0xf0103fffffe]
[ 38.314924] PCI host bridge to bus 0000:e0
[ 38.314924] pci_bus 0000:e0: root bus resource [io 0x03b0-0x03df]
[ 38.314924] pci_bus 0000:e0: root bus resource [io 0xe000-0xffff]
[ 38.317713] pci_bus 0000:e0: root bus resource [mem 0x000a0000-0x000fffff]
[ 38.320010] pci_bus 0000:e0: root bus resource [mem 0xf0000000-0xfdffffff]
[ 38.320231] pci_bus 0000:e0: root bus resource [mem 0xf0004000000-0xf0103fffffe]
[ 38.328604] pci_bus 0000:e0: root bus resource [bus e0-ff]
[ 38.415451] ACPI: Enabled 1 GPEs in block 10 to 1F
[ 38.416281] vgaarb: device added: PCI:0000:e0:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 38.416748] vgaarb: loaded
[ 38.416836] vgaarb: bridge control possible 0000:e0:02.0
[ 41.340255] Switched to clocksource itc
[ 41.353198] pnp: PnP ACPI init
[ 41.353315] ACPI: bus type PNP registered
[ 45.004983] GSI 34 (edge, high) -> CPU 1 (0x0100) vector 49
[ 45.064948] GSI 35 (edge, high) -> CPU 0 (0x0000) vector 50
[ 47.805005] pnp: PnP ACPI: found 4 devices
[ 47.805134] ACPI: bus type PNP unregistered
[ 47.805397] NET: Registered protocol family 2
[ 47.806192] TCP established hash table entries: 32768 (order: 5, 524288 bytes)
[ 47.806994] TCP bind hash table entries: 32768 (order: 5, 524288 bytes)
[ 47.814133] TCP: Hash tables configured (established 32768 bind 32768)
[ 47.814411] TCP: reno registered
[ 47.821407] UDP hash table entries: 2048 (order: 2, 65536 bytes)
[ 47.821701] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
[ 48.244939] GSI 16 (level, low) -> CPU 1 (0x0100) vector 51
[ 48.684885] GSI 16 (level, low) -> CPU 1 (0x0100) vector 51 unregistered
[ 49.124898] GSI 17 (level, low) -> CPU 0 (0x0000) vector 51
[ 49.564884] GSI 17 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[ 50.004898] GSI 18 (level, low) -> CPU 1 (0x0100) vector 51
[ 50.444884] GSI 18 (level, low) -> CPU 1 (0x0100) vector 51 unregistered
[ 50.445229] pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
[ 50.446221] Unpacking initramfs...
[ 54.323605] Freeing initrd memory: 8752kB freed
[ 54.324179] perfmon: version 2.0 IRQ 238
[ 54.324310] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[ 54.326008] perfmon: added sampling format default_format
[ 54.326179] perfmon_default_smpl: default_format v2.0 registered
[ 54.350049] bounce pool size: 64 pages
[ 54.360843] VFS: Disk quotas dquot_6.5.2
[ 54.361329] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 54.361893] msgmni has been set to 5505
[ 54.363536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 54.363768] io scheduler noop registered
[ 54.370153] io scheduler deadline registered
[ 54.370486] io scheduler cfq registered (default)
[ 54.458441] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 54.478993] 00:02: ttyS0 at MMIO 0xff5e0000 (irq = 49, base_baud = 115200) is a 16550A
[ 54.499727] 00:03: ttyS1 at MMIO 0xff5e2000 (irq = 50, base_baud = 115200) is a 16550A
[ 54.664919] GSI 82 (level, low) -> CPU 0 (0x0000) vector 51
[ 54.667016] 0000:e0:01.0: ttyS2 at MMIO 0xf8051000 (irq = 54, base_baud = 115200) is a 16450
[ 54.867666] 0000:e0:01.1: ttyS3 at MMIO 0xf8050000 (irq = 54, base_baud = 115200) is a 16550A
[ 54.868219] console [ttyS3] enabled, bootconsole disabled
[ 54.868219] console [ttyS3] enabled, bootconsole disabled
[ 54.868959] Couldn't register serial port 0000:e0:01.1: -28
[ 54.874677] mousedev: PS/2 mouse device common for all mice
[ 54.878167] TCP: cubic registered
[ 54.878304] Key type dns_resolver registered
[ 54.878976] registered taskstats version 1
[ 54.886702] /usr/src/linux-3.12.8-gentoo/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 54.891067] Freeing unused kernel memory: 912K (e0000000048dc000 - e0000000049c0000)
[ 54.898851] NET: Registered protocol family 1
[ 55.017387] dracut: dracut-031-r1
[ 55.159762] device-mapper: uevent: version 1.0.3
[ 55.160251] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@xxxxxxxxxx
[ 55.171072] systemd-udevd[989]: starting version 204
[ 55.272629] SCSI subsystem initialized
[ 55.310649] ACPI: bus type USB registered
[ 55.310864] Fusion MPT base driver 3.04.20
[ 55.311004] Copyright (c) 1999-2008 LSI Corporation
[ 55.311978] usbcore: registered new interface driver usbfs
[ 55.312415] usbcore: registered new interface driver hub
[ 55.319107] usbcore: registered new device driver usb
[ 55.323269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 55.329763] ehci-pci: EHCI PCI platform driver
[ 55.340845] Fusion MPT SPI Host driver 3.04.20
[ 55.398593] ACPI Error: [LBAS] Namespace lookup failure, AE_ALREADY_EXISTS (20130725/dswload2-330)
[ 55.398901] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20130725/psobject-222)
[ 55.399423] ACPI Error: Method parse/execution failed [\LBA_.PRT_] (Node e0000040bd7a0c08), AE_ALREADY_EXISTS (20130725/psparse-536)
[ 55.413731] ACPI Error: Method parse/execution failed [\_SB_.SBA0.PCI1._PRT] (Node e0000040bd7a1ce8), AE_ALREADY_EXISTS (20130725/psparse-536)
[ 55.421359] ACPI: Marking method _PRT as Serialized because of AE_ALREADY_EXISTS error
[ 55.428623] ACPI Error: Method execution failed [\_SB_.SBA0.PCI1._PRT] (Node e0000040bd7a1ce8), AE_ALREADY_EXISTS (20130725/uteval-103)
[ 55.436159] mptspi 0000:20:01.0: can't derive routing for PCI INT A
[ 55.443359] mptspi 0000:20:01.0: PCI INT A: no GSI
[ 55.449165] mptbase: ioc0: Initiating bringup
[ 55.754874] ACPI: Marking method PRT_ as Serialized because of AE_ALREADY_EXISTS error
[ 55.755219] GSI 21 (level, low) -> CPU 1 (0x0100) vector 52
[ 55.755775] pata_cmd64x 0000:00:02.0: Secondary port is disabled
[ 55.757304] scsi0 : pata_cmd64x
[ 55.763356] scsi1 : pata_cmd64x
[ 55.763775] ata1: PATA max UDMA/100 cmd 0xd58 ctl 0xd64 bmdma 0xd40 irq 55
[ 55.770415] ata2: DUMMY
[ 55.950269] ata1.00: ATAPI: DV-28E-B, 2.2B, max UDMA/33
[ 55.990169] ata1.00: configured for UDMA/33
[ 55.991690] scsi 0:0:0:0: CD-ROM TEAC DV-28E-B 2.2B PQ: 0 ANSI: 5
[ 56.164929] GSI 18 (level, low) -> CPU 0 (0x0000) vector 53
[ 56.165214] ehci-pci 0000:00:01.2: EHCI Host Controller
[ 56.165676] ehci-pci 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 56.166241] ehci-pci 0000:00:01.2: irq 53, io mem 0x80021000
[ 56.184781] ehci-pci 0000:00:01.2: USB 2.0 started, EHCI 0.95
[ 56.185591] hub 1-0:1.0: USB hub found
[ 56.185730] hub 1-0:1.0: 5 ports detected
[ 56.193279] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 56.193486] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 56.649741] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 73.309746] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 75.209735] mptbase: ioc0: Attempting Retry Config request type 0x3, page 0x0, action 0
[ 90.209747] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 90.210004] mptbase: ioc0: Initiating recovery
[ 96.889752] mptbase: ioc0: Attempting Retry Config request type 0x3, page 0x0, action 0
[ 111.889746] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 111.890004] mptbase: ioc0: Initiating recovery
[ 117.566111] dracut Warning: Could not boot.
dracut Warning: Could not boot.
[ 117.567130] dracut Warning: /dev/maroon/usr does not exist
dracut Warning: /dev/maroon/usr does not exist
[ 117.567989] dracut Warning: /dev/sda2 does not exist
dracut Warning: /dev/sda2 does not exist
[ 117.575155] dracut Warning: /dev/sda2 does not exist
dracut Warning: /dev/sda2 does not exist
Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
To get more debug information in the report,
reboot with "rd.debug" added to the kernel command line.
Dropping to debug shell.
dracut:/#
[ 133.579743] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 135.479735] mptbase: ioc0: Attempting Retry Config request type 0x4, page 0x1, action 0
[ 150.479733] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 150.479982] mptbase: ioc0: Initiating recovery
[ 157.159740] mptbase: ioc0: Attempting Retry Config request type 0x4, page 0x1, action 0
[ 172.159733] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 172.159981] mptbase: ioc0: Initiating recovery
[ 193.839733] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 195.739733] mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0
[ 210.739732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 210.739981] mptbase: ioc0: Initiating recovery
[ 217.419733] mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0
[ 232.419732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 232.419981] mptbase: ioc0: Initiating recovery
[ 254.099732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 255.999733] mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x4, action 0
[ 270.999732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 270.999980] mptbase: ioc0: Initiating recovery
[ 277.679733] mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x4, action 0
[ 292.679732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 292.679982] mptbase: ioc0: Initiating recovery
[ 314.359732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 316.259732] mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0
[ 331.259731] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 331.259982] mptbase: ioc0: Initiating recovery
[ 337.939733] mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0
[ 352.939731] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 352.939981] mptbase: ioc0: Initiating recovery
[ 374.619732] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 376.519732] mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0
[ 391.519738] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 391.519988] mptbase: ioc0: Initiating recovery
[ 398.199732] mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0
[ 413.199731] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 413.199980] mptbase: ioc0: Initiating recovery
[ 419.879821] scsi2 : ioc0: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=-1
[ 419.881776] ------------[ cut here ]------------
[ 419.882152] WARNING: CPU: 1 PID: 17 at /usr/src/linux-3.12.8-gentoo/mm/page_alloc.c:2483 __alloc_pages_nodemask+0x460/0x1180()
[ 419.889529] Modules linked in: sr_mod cdrom ata_generic mptspi(+) ehci_pci scsi_transport_spi ehci_hcd pata_cmd64x mptscsih libata mptbase usbcore scsi_mod usb_common dm_mirror dm_region_hash dm_log dm_mod unix
[ 419.904300] CPU: 1 PID: 17 Comm: kworker/u4:1 Not tainted 3.12.8-gentoo #1
[ 419.911927] Hardware name: hp server rx2600 , BIOS 02.31 03/11/2004
[ 419.918063] Workqueue: events_unbound async_run_entry_fn
[ 419.918258]
[ 419.918258] Call Trace:
[ 419.922751] [<a000000100014020>] show_stack+0x80/0xa0
[ 419.922751] sp=e0000040bdbbfb00 bsp=e0000040bdbb95e0
[ 419.927682] [<a000000100756880>] dump_stack+0xd0/0x110
[ 419.927682] sp=e0000040bdbbfcd0 bsp=e0000040bdbb9580
[ 419.932456] [<a000000100081e60>] warn_slowpath_common+0xa0/0xe0
[ 419.932456] sp=e0000040bdbbfcd0 bsp=e0000040bdbb9540
[ 419.941635] [<a000000100081ed0>] warn_slowpath_null+0x30/0x60
[ 419.941635] sp=e0000040bdbbfcd0 bsp=e0000040bdbb9518
[ 419.946589] [<a00000010019a660>] __alloc_pages_nodemask+0x460/0x1180
[ 419.946589] sp=e0000040bdbbfcd0 bsp=e0000040bdbb9330
[ 419.955809] [<a0000001005ba1f0>] sba_alloc_coherent+0x150/0x360
[ 419.955809] sp=e0000040bdbbfd20 bsp=e0000040bdbb92e8
[ 419.960777] [<a000000200efd840>] mptspi_write_spi_device_pg1+0x140/0x6e0 [mptspi]
[ 419.960777] sp=e0000040bdbbfd20 bsp=e0000040bdbb9268
[ 419.969992] [<a000000200efdea0>] mptspi_write_width+0xc0/0xe0 [mptspi]
[ 419.969992] sp=e0000040bdbbfd50 bsp=e0000040bdbb9240
[ 419.974806] [<a000000200eff660>] mptspi_target_alloc+0x400/0x500 [mptspi]
[ 419.974806] sp=e0000040bdbbfd60 bsp=e0000040bdbb91d8
[ 419.993336] [<a000000200b18810>] scsi_alloc_target+0x3d0/0x640 [scsi_mod]
[ 419.993336] sp=e0000040bdbbfd60 bsp=e0000040bdbb9160
[ 420.000730] [<a000000200b1b280>] __scsi_scan_target+0xc0/0xca0 [scsi_mod]
[ 420.000730] sp=e0000040bdbbfd60 bsp=e0000040bdbb90a8
[ 420.008221] [<a000000200b1bf60>] scsi_scan_channel+0x100/0x180 [scsi_mod]
[ 420.008221] sp=e0000040bdbbfdd0 bsp=e0000040bdbb9048
[ 420.022904] [<a000000200b1c740>] scsi_scan_host_selected+0x160/0x300 [scsi_mod]
[ 420.022904] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8ff0
[ 420.037639] [<a000000200b1cac0>] do_scsi_scan_host+0x1e0/0x200 [scsi_mod]
[ 420.037639] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8fb8
[ 420.045275] [<a000000200b1d030>] do_scan_async+0x30/0x400 [scsi_mod]
[ 420.045275] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8f70
[ 420.052840] [<a0000001000dc2e0>] async_run_entry_fn+0xc0/0x440
[ 420.052840] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8f28
[ 420.067440] [<a0000001000b9b00>] process_one_work+0x320/0x860
[ 420.067440] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8ea0
[ 420.074881] [<a0000001000bc690>] worker_thread+0x310/0xae0
[ 420.074881] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8dd0
[ 420.089504] [<a0000001000ccb90>] kthread+0x150/0x180
[ 420.089504] sp=e0000040bdbbfdd0 bsp=e0000040bdbb8d98
[ 420.097058] [<a00000010000c4b0>] call_payload+0x50/0x80
[ 420.097058] sp=e0000040bdbbfe30 bsp=e0000040bdbb8d80
[ 420.104515] ---[ end trace 63db38394b73440a ]---
[ 420.112107] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 420.359891] GSI 28 (level, low) -> CPU 1 (0x0100) vector 54
[ 420.360590] mptbase: ioc1: Initiating bringup
[ 421.559736] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 423.238314] scsi3 : ioc1: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=56
dracut:/# logout
[ 433.591194] dracut Warning: Could not boot.
dracut Warning: Could not boot.
[ 433.592232] dracut Warning: /dev/maroon/usr does not exist
dracut Warning: /dev/maroon/usr does not exist
[ 433.593140] dracut Warning: /dev/sda2 does not exist
dracut Warning: /dev/sda2 does not exist
[ 433.600333] dracut Warning: /dev/sda2 does not exist
dracut Warning: /dev/sda2 does not exist
Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
To get more debug information in the report,
reboot with "rd.debug" added to the kernel command line.
Dropping to debug shell.
dracut:/#
[ 441.039747] mptscsih: ioc0: attempting task abort! (sc=e0000040b83db700)
[ 441.039962] scsi 2:0:0:0: CDB:
[ 441.040289] cdb[0]=0x12: 12 00 00 00 24 00
[ 451.339732] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 453.759738] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=e0000040b83db700)
[ 453.759989] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 453.760456] scsi target2:0:0: asynchronous
[ 453.760594] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 453.769730] mptscsih: ioc0: attempting task abort! (sc=e0000040b83db700)
[ 453.775140] scsi 2:0:0:0: CDB:
[ 453.775244] cdb[0]=0x0: 00 00 00 00 00 00
[ 464.079732] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 465.979736] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=e0000040b83db700)
[ 465.979963] mptscsih: ioc0: attempting target reset! (sc=e0000040b83db700)
[ 465.980411] scsi 2:0:0:0: CDB:
[ 465.980514] cdb[0]=0x12: 12 00 00 00 24 00
[ 465.987630] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 465.987880] scsi target2:0:0: asynchronous
[ 465.995135] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 476.289731] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 478.189734] mptscsih: ioc0: target reset: SUCCESS (sc=e0000040b83db700)
[ 478.189952] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 478.190417] scsi target2:0:0: asynchronous
[ 478.190553] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 478.199730] mptscsih: ioc0: attempting task abort! (sc=e0000040b83db700)
[ 478.204919] scsi 2:0:0:0: CDB:
[ 478.205024] cdb[0]=0x0: 00 00 00 00 00 00
dracut:/# lvm_scan
[ 486.032216] dracut: Scanning devices for LVM logical volumes maroon/usr
[ 486.041638] dracut: No volume groups found
[ 486.051388] dracut: Volume group "maroon" not found
[ 486.052008] dracut: Skipping volume group maroon
dracut:/#
[ 488.509740] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 490.409737] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=e0000040b83db700)
[ 490.409969] mptscsih: ioc0: attempting bus reset! (sc=e0000040b83db700)
[ 490.410397] scsi 2:0:0:0: CDB:
[ 490.410502] cdb[0]=0x12: 12 00 00 00 24 00
[ 490.417630] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 490.417884] scsi target2:0:0: asynchronous
[ 490.425073] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 500.719732] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 502.619741] mptscsih: ioc0: bus reset: SUCCESS (sc=e0000040b83db700)
[ 502.619947] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 502.620395] scsi target2:0:0: asynchronous
[ 502.620532] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 512.639731] mptscsih: ioc0: attempting task abort! (sc=e0000040b83db700)
[ 512.639938] scsi 2:0:0:0: CDB:
[ 512.640253] cdb[0]=0x0: 00 00 00 00 00 00
[ 522.939731] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 524.839736] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=e0000040b83db700)
[ 524.839974] mptscsih: ioc0: attempting host reset! (sc=e0000040b83db700)
[ 524.840426] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 524.847576] scsi target2:0:0: asynchronous
[ 524.847715] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 526.739733] mptscsih: ioc0: host reset: SUCCESS (sc=e0000040b83db700)
[ 526.739940] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
[ 526.740401] scsi target2:0:0: asynchronous
[ 526.740538] scsi target2:0:0: mptspi: ioc0: dma_alloc_coherent for parameters failed
dracut:/# ls /dev/sd*
ls: cannot access /dev/sd*: No such file or directory
dracut:/#
[ 536.759730] mptscsih: ioc0: attempting task abort! (sc=e0000040b83db700)
[ 536.759939] scsi 2:0:0:0: CDB:
[ 536.760271] cdb[0]=0x0: 00 00 00 00 00 00
Attachment:
signature.asc
Description: PGP signature
