On Mon, Jan 20, 2014 at 08:00:23PM +0100, Milan Svoboda wrote: > Non-working: > > 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64 GNU/Linux > > I'm sorry, I don't remember exactly which version worked, I have had the disk connected to TV for > a long time and only recently I wanted to copy some movies on it. I guess it worked something like > 6 or 9 months ago. If you're up for compiling a custom kernel, can you try 3.12.7 with these two patches applied? http://marc.info/?l=linux-usb&m=138921117504911&w=2 http://marc.info/?l=linux-usb&m=138921117604912&w=2 I'm concerned the I/O errors are caused by commit 459d3c146117 "usb: xhci: Link TRB must not occur within a USB payload burst". Can you also send me the output of `sudo lspci -vvv -n`? I need the output for the xHCI host only. Sarah Sharp > ______________________________________________________________ > > Od: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> > > Komu: Milan Svoboda <milan.svoboda@xxxxxxxxxx> > > Datum: 20.01.2014 19:23 > > Předmět: Re: usb disk recognized but fails > > > > CC: linux-usb@xxxxxxxxxxxxxxx, "USB Storage List" <usb-storage@xxxxxxxxxxxxxxxxxxxxxxxx>, linux-scsi@xxxxxxxxxxxxxxx > >Cc-ing the USB storage list, in case this device needs some quirk. > > > >On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote: > >> The SATA adapter has a power input, but it is not used, it is connected to the > >> PC with Y-type USB cable. > >> > >> The disk works with my "smart" TV, it works with Windows on the same machine, > >> it also had worked some time ago with Linux, but now it shows the following: > > > >Do you know which kernel version it worked with? What version are you > >currently running? Please run `uname -a`. > > > >> [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd > >> [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected > >> [ 2192.042500] scsi9 : usb-storage 1-3:1.0 > >> [ 2193.044219] scsi 9:0:0:0: Direct-Access WDC WD64 00BPVT-00HXZT0 PQ: 0 ANSI: 0 > >> [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) > >> [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off > >> [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00 > >> [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found > >> [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through > >> [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found > >> [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through > >> [ 2193.054389] sdb: sdb1 > >> [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found > >> [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through > >> [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk > >> [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd > >> [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480 > >> [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0 > >> [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code > >> [ 2267.897719] sd 9:0:0:0: [sdb] > >> [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08 > >> [ 2267.897722] sd 9:0:0:0: [sdb] > >> [ 2267.897724] Sense Key : 0x4 [current] > >> [ 2267.897735] sd 9:0:0:0: [sdb] > >> [ 2267.897736] ASC=0x0 ASCQ=0x0 > >> [ 2267.897738] sd 9:0:0:0: [sdb] CDB: > >> [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00 > >> [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607 > >> [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272 > >> [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273 > >> [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274 > >> [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275 > >> [ 2270.884154] usb 1-3: USB disconnect, device number 5 > >> > >> Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge > >> Device Descriptor: > >> bLength 18 > >> bDescriptorType 1 > >> bcdUSB 2.00 > >> bDeviceClass 0 (Defined at Interface level) > >> bDeviceSubClass 0 > >> bDeviceProtocol 0 > >> bMaxPacketSize0 64 > >> idVendor 0x14cd Super Top > >> idProduct 0x6116 M6116 SATA Bridge > >> bcdDevice 1.50 > >> iManufacturer 1 Super Top > >> iProduct 3 USB 2.0 SATA BRIDGE > >> iSerial 2 M6116018VE15 > >> bNumConfigurations 1 > >> Configuration Descriptor: > >> bLength 9 > >> bDescriptorType 2 > >> wTotalLength 32 > >> bNumInterfaces 1 > >> bConfigurationValue 1 > >> iConfiguration 0 > >> bmAttributes 0xc0 > >> Self Powered > >> MaxPower 2mA > >> Interface Descriptor: > >> bLength 9 > >> bDescriptorType 4 > >> bInterfaceNumber 0 > >> bAlternateSetting 0 > >> bNumEndpoints 2 > >> bInterfaceClass 8 Mass Storage > >> bInterfaceSubClass 6 SCSI > >> bInterfaceProtocol 80 Bulk-Only > >> iInterface 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x81 EP 1 IN > >> bmAttributes 2 > >> Transfer Type Bulk > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0200 1x 512 bytes > >> bInterval 0 > >> Endpoint Descriptor: > >> bLength 7 > >> bDescriptorType 5 > >> bEndpointAddress 0x02 EP 2 OUT > >> bmAttributes 2 > >> Transfer Type Bulk > >> Synch Type None > >> Usage Type Data > >> wMaxPacketSize 0x0200 1x 512 bytes > >> bInterval 0 > >> Device Qualifier (for other device speed): > >> bLength 10 > >> bDescriptorType 6 > >> bcdUSB 2.00 > >> bDeviceClass 0 (Defined at Interface level) > >> bDeviceSubClass 0 > >> bDeviceProtocol 0 > >> bMaxPacketSize0 64 > >> bNumConfigurations 1 > >> Device Status: 0x0001 > >> Self Powered > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-usb" in > >> the body of a message to majordomo@xxxxxxxxxxxxxxx > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
