Re: [PATCH v9 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 15 January 2014 15:59:27 Loc Ho wrote:
> 
> May be I misread what Mark mentioned. The binding documentation should
> not specify the requirement of 0. And the binding of the dts should be
> as is:
> 
> phy1 {
>    #phy-cells = <1>;
> };
> 
> sata1 {
>    :::
>    phys = <&phy1 0>;     where 0 indicates the mode of operation?
> };
> 
> 

Yes, that is right. You can keep the zero in the example, but the
binding text must not require a specific phy to be used.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux