From: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
This relies on a kernel thread which I wish to replace with a
work queue based solution.
Signed-off-by: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/hpsa.c | 50 ++------------------------------------------------
drivers/scsi/hpsa.h | 1 -
2 files changed, 2 insertions(+), 49 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 06cb802..91e2d83 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1008,20 +1008,6 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
for (i = 0; i < nsds; i++) {
if (!sd[i]) /* if already added above. */
continue;
-
- /* Don't add devices which are NOT READY, FORMAT IN PROGRESS
- * as the SCSI mid-layer does not handle such devices well.
- * It relentlessly loops sending TUR at 3Hz, then READ(10)
- * at 160Hz, and prevents the system from coming up.
- */
- if (sd[i]->format_in_progress) {
- dev_info(&h->pdev->dev,
- "Logical drive format in progress, device c%db%dt%dl%d offline.\n",
- h->scsi_host->host_no,
- sd[i]->bus, sd[i]->target, sd[i]->lun);
- continue;
- }
-
device_change = hpsa_scsi_find_entry(sd[i], h->dev,
h->ndevices, &entry);
if (device_change == DEVICE_NOT_FOUND) {
@@ -1727,34 +1713,6 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
device->lun = lun;
}
-static unsigned char hpsa_format_in_progress(struct ctlr_info *h,
- unsigned char scsi3addr[])
-{
- struct CommandList *c;
- unsigned char *sense, sense_key, asc, ascq;
-#define ASC_LUN_NOT_READY 0x04
-#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
-
-
- c = cmd_special_alloc(h);
- if (!c)
- return 0;
- fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
- hpsa_scsi_do_simple_cmd_core(h, c);
- sense = c->err_info->SenseInfo;
- sense_key = sense[2];
- asc = sense[12];
- ascq = sense[13];
- if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
- c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
- sense_key == NOT_READY &&
- asc == ASC_LUN_NOT_READY &&
- ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS)
- return 1;
- cmd_special_free(h, c);
- return 0;
-}
-
static int hpsa_update_device_info(struct ctlr_info *h,
unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
unsigned char *is_OBDR_device)
@@ -1793,14 +1751,10 @@ static int hpsa_update_device_info(struct ctlr_info *h,
sizeof(this_device->device_id));
if (this_device->devtype == TYPE_DISK &&
- is_logical_dev_addr_mode(scsi3addr)) {
+ is_logical_dev_addr_mode(scsi3addr))
hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
- this_device->format_in_progress =
- hpsa_format_in_progress(h, scsi3addr);
- } else {
+ else
this_device->raid_level = RAID_UNKNOWN;
- this_device->format_in_progress = 0;
- }
if (is_OBDR_device) {
/* See if this is a One-Button-Disaster-Recovery device
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 04074f5..5f3f72f 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -46,7 +46,6 @@ struct hpsa_scsi_dev_t {
unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
unsigned char model[16]; /* bytes 16-31 of inquiry data */
unsigned char raid_level; /* from inquiry page 0xC1 */
- unsigned char format_in_progress;
};
struct reply_pool {
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
