On Wed, Jan 15, 2014 at 07:11:48AM +0000, Loc Ho wrote: > Signed-off-by: Loc Ho <lho@xxxxxxx> > Signed-off-by: Tuan Phan <tphan@xxxxxxx> > Signed-off-by: Suman Tripathi <stripathi@xxxxxxx> > --- > .../devicetree/bindings/ata/apm-xgene.txt | 68 ++++++++++++++++++++ > 1 files changed, 68 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt > > diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt > new file mode 100644 > index 0000000..3d1421a > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt > @@ -0,0 +1,68 @@ > +* APM X-Gene 6.0 Gb/s SATA host controller nodes > + > +SATA host controller nodes are defined to describe on-chip Serial ATA > +controllers. Each SATA controller (pair of ports) have its own node. > + > +Required properties: > +- compatible : Shall be "apm,xgene-ahci-sgmii" if mux'ed with SGMII > + or "apm,xgene-ahci-pcie" if mux'ed with PCIe. > +- reg : First memory resource shall be the AHCI memory > + resource. > + Second memory resource shall be the host controller > + memory resource. > +- interrupts : Interrupt mapping for SATA host controller IRQ. s/Interrupt-mapping/interrupt-specifier/ > +- clocks : Reference to the clock entry. > +- phys : PHY reference with parameter 0. The specific value of the phy-specifier shouldn't matter to this binding. What should matter is what it logically corresponds to. > +- phy-names : Name of the PHY. Shall be "sata-6g". Could you define phys in terms of phy-names please? It makes the relationship clearer: - phys: a list of phandles + phy-sciefiers, one for each entry in phy-names - phy-names: Should contain: * "sata-6g" for the SATA PHY <notes about requirements go here> Cheers, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
