This patch adds support for the APM X-Gene SoC SATA host controller driver. It requires the corresponding APM X-Gene SoC PHY driver. Signed-off-by: Loc Ho <lho@xxxxxxx> Signed-off-by: Tuan Phan <tphan@xxxxxxx> Signed-off-by: Suman Tripathi <stripathi@xxxxxxx> --- drivers/ata/Kconfig | 8 + drivers/ata/Makefile | 1 + drivers/ata/sata_xgene.c | 630 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 639 insertions(+), 0 deletions(-) create mode 100644 drivers/ata/sata_xgene.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4e73772..cd1bc3c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -106,6 +106,14 @@ config AHCI_IMX If unsure, say N. +config SATA_XGENE + tristate "APM X-Gene 6.0Gbps SATA host controller support" + depends on ARM64 || COMPILE_TEST + select SATA_AHCI_PLATFORM + select PHY_XGENE + help + This option enables support for APM X-Gene SoC SATA host controller. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 46518c6..1c0fabe 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o +obj-$(CONFIG_SATA_XGENE) += sata_xgene.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/sata_xgene.c b/drivers/ata/sata_xgene.c new file mode 100644 index 0000000..2e9da35 --- /dev/null +++ b/drivers/ata/sata_xgene.c @@ -0,0 +1,630 @@ +/* + * AppliedMicro X-Gene SoC SATA Host Controller Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Loc Ho <lho@xxxxxxx> + * Tuan Phan <tphan@xxxxxxx> + * Suman Tripathi <stripathi@xxxxxxx> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/phy/phy.h> +#include "ahci.h" + +/* Controller who PHY shared with SGMII Ethernet PHY */ +#define XGENE_AHCI_SGMII_DTS "apm,xgene-ahci-sgmii" + +/* Controller who PHY (internal reference clock macro) shared with PCIe */ +#define XGENE_AHCI_PCIE_DTS "apm,xgene-ahci-pcie" + +/* Max # of disk per a controller */ +#define MAX_AHCI_CHN_PERCTR 2 + +#define SATA_ENET_MUX_OFFSET 0x00007000 +#define SATA_DIAG_OFFSET 0x0000D000 +#define SATA_GLB_OFFSET 0x0000D850 +#define SATA_SHIM_OFFSET 0x0000E000 +#define SATA_MASTER_OFFSET 0x0000F000 +#define SATA_PORT0_OFFSET 0x00000100 +#define SATA_PORT1_OFFSET 0x00000180 + +/* MUX CSR */ +#define SATA_ENET_CONFIG_REG 0x00000000 +#define CFG_SATA_ENET_SELECT_MASK 0x00000001 + +/* SATA host controller CSR */ +#define SLVRDERRATTRIBUTES 0x00000000 +#define SLVWRERRATTRIBUTES 0x00000004 +#define MSTRDERRATTRIBUTES 0x00000008 +#define MSTWRERRATTRIBUTES 0x0000000c +#define BUSCTLREG 0x00000014 +#define IOFMSTRWAUX 0x00000018 +#define INTSTATUSMASK 0x0000002c +#define ERRINTSTATUS 0x00000030 +#define ERRINTSTATUSMASK 0x00000034 + +/* SATA host AHCI CSR */ +#define PORTCFG 0x000000a4 +#define PORTADDR_SET(dst, src) \ + (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) +#define PORTPHY1CFG 0x000000a8 +#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ + (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) +#define PORTPHY2CFG 0x000000ac +#define PORTPHY3CFG 0x000000b0 +#define PORTPHY4CFG 0x000000b4 +#define PORTPHY5CFG 0x000000b8 +#define SCTL0 0x0000012C +#define PORTPHY5CFG_RTCHG_SET(dst, src) \ + (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) +#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ + (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) +#define PORTAXICFG 0x000000bc +#define PORTAXICFG_OUTTRANS_SET(dst, src) \ + (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) + +/* SATA host controller slave CSR */ +#define INT_SLV_TMOMASK 0x00000010 + +/* SATA global diagnostic CSR */ +#define CFG_MEM_RAM_SHUTDOWN 0x00000070 +#define BLOCK_MEM_RDY 0x00000074 + +struct xgene_ahci_context { + struct ahci_host_priv hpriv; + struct device *dev; + int irq; + void __iomem *csr_base; /* CSR base address of IP */ + void __iomem *mmio_base; /* AHCI I/O base address */ + + struct phy *phy; +}; + +static int xgene_ahci_get_channel(struct ata_host *host, struct ata_port *port) +{ + int i; + for (i = 0; i < host->n_ports; i++) + if (host->ports[i] == port) + return i; + return -1; +} + +static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) +{ + void __iomem *diagcsr = ctx->csr_base + SATA_DIAG_OFFSET; + int try; + u32 val; + + val = readl(diagcsr + CFG_MEM_RAM_SHUTDOWN); + if (val == 0) { + dev_dbg(ctx->dev, "memory already released from shutdown\n"); + return 0; + } + dev_dbg(ctx->dev, "Release memory from shutdown\n"); + /* SATA controller memory in shutdown. Remove from shutdown. */ + writel(0x0, diagcsr + CFG_MEM_RAM_SHUTDOWN); + readl(diagcsr + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ + + /* Check for at least ~1ms */ + try = 1000; + do { + val = readl(diagcsr + BLOCK_MEM_RDY); + if (val != 0xFFFFFFFF) + usleep_range(1, 100); + } while (val != 0xFFFFFFFF && try-- > 0); + if (try <= 0) { + dev_err(ctx->dev, "failed to release memory from shutdown\n"); + return -ENODEV; + } + return 0; +} + +/* + * Custom Query ID command + * + * Due to HW errata, we must stop and re-start the port state machine after + * read ID command. + */ +static unsigned int xgene_ahci_read_id(struct ata_device *dev, + struct ata_taskfile *tf, u16 *id) +{ + u32 err_mask; + void __iomem *port_mmio = ahci_port_base(dev->link->ap); + + err_mask = ata_do_dev_read_id(dev, tf, id); + if (err_mask) + return err_mask; + + /* Mask reserved area. Bit78 spec of Link Power Management + * bit15-8: reserved + * bit7: NCQ autosence + * bit6: Software settings preservation supported + * bit5: reserved + * bit4: In-order sata delivery supported + * bit3: DIPM requests supported + * bit2: DMA Setup FIS Auto-Activate optimization supported + * bit1: DMA Setup FIX non-Zero buffer offsets supported + * bit0: Reserved + * + * Clear reserved bit (DEVSLP bit) as we don't support DEVSLP + */ + id[78] &= 0x00FF; + + /* Restart the port if requred due to HW errata */ + if (!readl(port_mmio + PORT_CMD_ISSUE)) { + writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* Force a barrier */ + writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* Force a barrier */ + } + return 0; +} + +static void xgene_ahci_force_phy_rdy(struct xgene_ahci_context *ctx, + int channel, int force) +{ + void __iomem *mmio = ctx->mmio_base; + u32 val; + + val = readl(mmio + PORTCFG); + val = PORTADDR_SET(val, channel == 0 ? 2 : 3); + writel(val, mmio + PORTCFG); + readl(mmio + PORTCFG); /* Force a barrier */ + val = readl(mmio + PORTPHY1CFG); + val = PORTPHY1CFG_FRCPHYRDY_SET(val, force); + writel(val, mmio + PORTPHY1CFG); +} + +static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) +{ + void __iomem *mmio = ctx->mmio_base; + u32 val; + + dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", + mmio, channel); + val = readl(mmio + PORTCFG); + val = PORTADDR_SET(val, channel == 0 ? 2 : 3); + writel(val, mmio + PORTCFG); + readl(mmio + PORTCFG); /* Force a barrier */ + /* Disable fix rate */ + writel(0x0001fffe, mmio + PORTPHY1CFG); + readl(mmio + PORTPHY1CFG); /* Force a barrier */ + writel(0x5018461c, mmio + PORTPHY2CFG); + readl(mmio + PORTPHY2CFG); /* Force a barrier */ + writel(0x1c081907, mmio + PORTPHY3CFG); + readl(mmio + PORTPHY3CFG); /* Force a barrier */ + writel(0x1c080815, mmio + PORTPHY4CFG); + readl(mmio + PORTPHY4CFG); /* Force a barrier */ + /* Set window negotiation */ + val = readl(mmio + PORTPHY5CFG); + val = PORTPHY5CFG_RTCHG_SET(val, 0x300); + writel(val, mmio + PORTPHY5CFG); + readl(mmio + PORTPHY5CFG); /* Force a barrier */ + val = readl(mmio + PORTAXICFG); + val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ + val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ + writel(val, mmio + PORTAXICFG); + readl(mmio + PORTAXICFG); /* Force a barrier */ +} + +static int xgene_ahci_phy_restart(struct ata_link *link) +{ + struct ata_port *port = link->ap; + struct ata_host *host = port->host; + struct xgene_ahci_context *ctx = host->private_data; + int channel; + + channel = xgene_ahci_get_channel(host, port); + if (channel < 0 || channel >= MAX_AHCI_CHN_PERCTR) + return -EINVAL; + xgene_ahci_force_phy_rdy(ctx, channel, 1); + xgene_ahci_force_phy_rdy(ctx, channel, 0); + return 0; +} + +static int xgene_ahci_do_hardreset(struct ata_link *link, + unsigned long deadline, bool *online) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct xgene_ahci_context *ctx = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_taskfile tf; + int first_time = 1; + int rc; + u32 val; + int chan; + int i; + + chan = xgene_ahci_get_channel(ap->host, ap); + +hardreset_retry: + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = 0x80; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + rc = sata_link_hardreset(link, timing, deadline, online, + ahci_check_ready); + + if (*online) { + /* Check to ensure that the disk comes up in matching speed */ + if (first_time) { + u32 gen_speed; + + first_time = 0; + sata_scr_read(link, SCR_STATUS, &gen_speed); + gen_speed = (gen_speed >> 4) & 0xf; + if (gen_speed == 1 || gen_speed == 2) { + /* For Gen2/1 and first time, let's check again + * with Gen2/1 PHY to ensure actual Gen2/1 disk. + */ + phy_set_speed(ctx->phy, chan, + gen_speed == 2 ? 3000000000ULL : + 1500000000ULL); + xgene_ahci_phy_restart(link); + goto hardreset_retry; + } + } + + /* Clear SER_DISPARITY/SER_10B_8B_ERR if set due to errata */ + for (i = 0; i < 5; i++) { + /* Check if error bit set */ + val = readl(port_mmio + PORT_SCR_ERR); + if (!(val & (SERR_DISPARITY | SERR_10B_8B_ERR))) + break; + /* Clear any error due to errata */ + xgene_ahci_force_phy_rdy(ctx, chan, 1); + /* Reset the PHY Rx path */ + phy_set_speed(ctx->phy, chan, 0); + xgene_ahci_force_phy_rdy(ctx, chan, 0); + /* Clear all errors */ + val = readl(port_mmio + PORT_SCR_ERR); + writel(val, port_mmio + PORT_SCR_ERR); + } + } + + /* clear all errors if any pending */ + val = readl(port_mmio + PORT_SCR_ERR); + writel(val, port_mmio + PORT_SCR_ERR); + + return rc; +} + +static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + bool online; + int rc; + int portcmd_saved; + u32 portclb_saved; + u32 portclbhi_saved; + u32 portrxfis_saved; + u32 portrxfishi_saved; + + /* As hardreset reset these CSR, let save it to restore later */ + portcmd_saved = readl(port_mmio + PORT_CMD); + portclb_saved = readl(port_mmio + PORT_LST_ADDR); + portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); + portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); + portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); + + ahci_stop_engine(ap); + + rc = xgene_ahci_do_hardreset(link, deadline, &online); + + /* As controller hardreset clear them, let restore them */ + writel(portcmd_saved, port_mmio + PORT_CMD); + writel(portclb_saved, port_mmio + PORT_LST_ADDR); + writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); + writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); + writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); + + ahci_start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + return rc; +} + +static struct ata_port_operations xgene_ahci_ops = { + .inherits = &ahci_ops, + .hardreset = xgene_ahci_hardreset, + .read_id = xgene_ahci_read_id, +}; + +static const struct ata_port_info xgene_ahci_port_info[] = { + { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &xgene_ahci_ops, + }, +}; + +static struct scsi_host_template xgene_ahci_sht = { + AHCI_SHT("XGene-ahci"), +}; + +static int xgene_ahci_hw_init(struct xgene_ahci_context *hpriv) +{ + int i; + int rc; + u32 val; + + /* Remove IP RAM out of shutdown */ + rc = xgene_ahci_init_memram(hpriv); + if (rc) + return rc; + + for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) + xgene_ahci_set_phy_cfg(hpriv, i); + + /* AXI disable Mask */ + writel(0xffffffff, hpriv->mmio_base + HOST_IRQ_STAT); + readl(hpriv->mmio_base + HOST_IRQ_STAT); /* Force a barrier */ + writel(0, hpriv->csr_base + INTSTATUSMASK); + readl(hpriv->csr_base + INTSTATUSMASK); /* Force a barrier */ + dev_dbg(hpriv->dev, "top level interrupt mask 0x%X value 0x%08X\n", + INTSTATUSMASK, val); + + writel(0x0, hpriv->csr_base + ERRINTSTATUSMASK); + readl(hpriv->csr_base + ERRINTSTATUSMASK); /* Force a barrier */ + writel(0x0, hpriv->csr_base + SATA_SHIM_OFFSET + INT_SLV_TMOMASK); + readl(hpriv->csr_base + SATA_SHIM_OFFSET + INT_SLV_TMOMASK); + + /* Enable AXI Interrupt */ + writel(0xffffffff, hpriv->csr_base + SLVRDERRATTRIBUTES); + writel(0xffffffff, hpriv->csr_base + SLVWRERRATTRIBUTES); + writel(0xffffffff, hpriv->csr_base + MSTRDERRATTRIBUTES); + writel(0xffffffff, hpriv->csr_base + MSTWRERRATTRIBUTES); + + /* Enable coherency */ + val = readl(hpriv->csr_base + BUSCTLREG); + val &= ~0x00000002; /* Enable write coherency */ + val &= ~0x00000001; /* Enable read coherency */ + writel(val, hpriv->csr_base + BUSCTLREG); + + val = readl(hpriv->csr_base + IOFMSTRWAUX); + val |= (1 << 3); /* Enable read coherency */ + val |= (1 << 9); /* Enable write coherency */ + writel(val, hpriv->csr_base + IOFMSTRWAUX); + val = readl(hpriv->csr_base + IOFMSTRWAUX); + dev_dbg(hpriv->dev, "coherency 0x%X value 0x%08X\n", + IOFMSTRWAUX, val); + + return rc; +} + +static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) +{ + void *mux_csr = ctx->csr_base + SATA_ENET_MUX_OFFSET; + u32 val; + + dev_dbg(ctx->dev, "switch the MUX to SATA\n"); + val = readl(mux_csr + SATA_ENET_CONFIG_REG); + val &= ~CFG_SATA_ENET_SELECT_MASK; + writel(val, mux_csr + SATA_ENET_CONFIG_REG); + val = readl(mux_csr + SATA_ENET_CONFIG_REG); + return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; +} + +static int xgene_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct xgene_ahci_context *hpriv; + struct ata_port_info pi = xgene_ahci_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + struct resource *res; + int n_ports; + int rc = 0; + int i; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + dev_err(dev, "can't allocate host context\n"); + return -ENOMEM; + } + + hpriv->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no MMIO space\n"); + return -EINVAL; + } + + hpriv->mmio_base = devm_ioremap_resource(dev, res); + if (!hpriv->mmio_base) { + dev_err(dev, "can't map %pR\n", res); + return -ENOMEM; + } + + hpriv->hpriv.mmio = hpriv->mmio_base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(dev, "no csr space\n"); + return -EINVAL; + } + + /* + * Can't use devm_ioremap_resource due to overlapping region. + * 0xYYYY.0000 - host core + * 0xYYYY.7000 - Mux (if applicable) + * 0xYYYY.A000 - PHY indirect access + * 0xYYYY.C000 - Clock + * 0xYYYY.D000 - RAM shutdown removal + * As we map the entire region as one, it overlaps with the PHY driver. + */ + hpriv->csr_base = devm_ioremap(dev, res->start, resource_size(res)); + if (!hpriv->csr_base) { + dev_err(dev, "can't map %pR\n", res); + return -ENOMEM; + } + + dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", + hpriv->csr_base, hpriv->mmio_base); + + hpriv->irq = platform_get_irq(pdev, 0); + if (hpriv->irq <= 0) { + dev_err(dev, "no IRQ\n"); + return -EINVAL; + } + + /* Select ATA */ + if (of_device_is_compatible(pdev->dev.of_node, + XGENE_AHCI_SGMII_DTS)) { + if (xgene_ahci_mux_select(hpriv)) { + dev_err(dev, "SATA mux selection failed\n"); + return -ENODEV; + } + } + + hpriv->hpriv.clk = clk_get(dev, NULL); + if (IS_ERR(hpriv->hpriv.clk)) { + dev_err(dev, "no clock\n"); + } else { + /* HW requires toggle of the clock */ + clk_prepare_enable(hpriv->hpriv.clk); + clk_disable_unprepare(hpriv->hpriv.clk); + rc = clk_prepare_enable(hpriv->hpriv.clk); + if (rc) { + dev_err(dev, "clock prepare enable failed\n"); + goto error; + } + } + + /* Configure the PHY */ + hpriv->phy = devm_phy_get(dev, "sata-6g"); + if (!hpriv->phy) { + dev_err(dev, "no PHY available\n"); + rc = -ENODEV; + goto error; + } + + rc = phy_init(hpriv->phy); + if (rc) { + dev_err(dev, "PHY initialize failed %d\n", rc); + goto error; + } + + /* Configure the host controller */ + xgene_ahci_hw_init(hpriv); + + /* Setup AHCI host priv structure */ + ahci_save_initial_config(dev, &hpriv->hpriv, 0, 0); + + /* prepare host */ + if (hpriv->hpriv.cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + ahci_set_em_messages(&hpriv->hpriv, &pi); + + /* + * CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->hpriv.cap), + fls(hpriv->hpriv.port_map)); + + host = ata_host_alloc_pinfo(dev, ppi, n_ports); + if (!host) { + rc = -ENOMEM; + goto error; + } + + host->private_data = hpriv; + + if (!(hpriv->hpriv.cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + dev_warn(dev, "ahci: SSS flag set, parallel bus scan disabled\n"); + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->hpriv.em_msg_type; + + /* disabled/not-implemented port */ + if (!(hpriv->hpriv.port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + rc = ahci_reset_controller(host); + if (rc) + goto error; + + ahci_init_controller(host); + + /* Setup DMA mask */ + rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); + if (rc) { + dev_err(dev, "Unable to set dma mask\n"); + goto error; + } + + rc = ata_host_activate(host, hpriv->irq, ahci_interrupt, + IRQF_SHARED, &xgene_ahci_sht); + if (rc) + goto error; + + dev_dbg(dev, "X-Gene SATA host controller initialized\n"); + return 0; + +error: + return rc; +} + +static const struct of_device_id xgene_ahci_of_match[] = { + {.compatible = XGENE_AHCI_SGMII_DTS,}, + {.compatible = XGENE_AHCI_PCIE_DTS,}, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); + +static struct platform_driver xgene_ahci_driver = { + .driver = { + .name = "xgene-ahci", + .owner = THIS_MODULE, + .of_match_table = xgene_ahci_of_match, + }, + .probe = xgene_ahci_probe, +}; + +module_platform_driver(xgene_ahci_driver); + +MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); +MODULE_AUTHOR("Loc Ho <lho@xxxxxxx>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.4"); -- 1.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
