Re: [PATCH 07/14] target/sbc: Add P_TYPE + PROT_EN bits to READ_CAPACITY_16

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/10/2014 10:39 PM, Martin K. Petersen wrote:
"Sagi" == Sagi Grimberg <sagig@xxxxxxxxxxxx> writes:
Sagi> What about FORMAT_UNIT emulation?  The backstore protection
Sagi> configuration is done at the target side via configfs/targetcli,

I don't know of any non-disk devices that actually implement FORMAT
UNIT. Usually such configuration is done using the array management
interface.


Hmm,

So this takes me to a corner I still don't understand, if a LUN is pre-formatted as T10-protected, what happens to unwritten blocks read? I mean, SCSI login executes some reads from several LBAs which will probably fail as blocks are unwritten.

What is the usage model? perform Initiator login and then format the LUN on the target node? This is why I thought FORMAT_UNIT should be implemented. I understand this corner will disappear in DIF v2 (following DIX1.1 draft) with ESCAPE flags.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux