Most sense code is already handled in the generic
code, so we shouldn't be adding special cases here.
However, when doing so we need to check for
unit attention whenever we're sending an internal
command.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 33 +++++-------------------------
1 file changed, 5 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 9d712be..e297851 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -388,6 +388,8 @@ static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
goto out;
}
err = alua_check_sense(sdev, &sense_hdr);
+ if (sense_hdr.sense_key == UNIT_ATTENTION)
+ err = ADD_TO_MLQUEUE;
if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry))
goto retry;
if (err != SUCCESS) {
@@ -617,21 +619,6 @@ static int alua_check_sense(struct scsi_device *sdev,
* LUN Not Accessible - ALUA state transition
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
- /*
- * LUN Not Accessible -- Target port in standby state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
- /*
- * LUN Not Accessible -- Target port in unavailable state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
- /*
- * LUN Not Ready -- Offline
- */
- return SUCCESS;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
@@ -646,7 +633,7 @@ static int alua_check_sense(struct scsi_device *sdev,
return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01)
/*
- * Mode Parameters Changed
+ * Mode parameter changed
*/
return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06)
@@ -659,18 +646,6 @@ static int alua_check_sense(struct scsi_device *sdev,
* Implicit ALUA state transition failed
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03)
- /*
- * Inquiry data has changed
- */
- return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e)
- /*
- * REPORTED_LUNS_DATA_HAS_CHANGED is reported
- * when switching controllers on targets like
- * Intel Multi-Flex. We can just retry.
- */
- return ADD_TO_MLQUEUE;
break;
}
@@ -735,6 +710,8 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg, int w
}
err = alua_check_sense(sdev, &sense_hdr);
+ if (sense_hdr.sense_key == UNIT_ATTENTION)
+ err = ADD_TO_MLQUEUE;
if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry)) {
sdev_printk(KERN_ERR, sdev, "%s: rtpg retry, ",
ALUA_DH_NAME);
--
1.7.12.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
