On 12/17/2013 09:49 PM, Nicholas A. Bellinger wrote:
> On Tue, 2013-12-17 at 09:18 +0100, Hannes Reinecke wrote:
>> Referrals need an LBA map, which needs to be kept
>> consistent across all target port groups. So
>> instead of tying the map to the target port groups
>> I've implemented a single attribute containing the
>> entire map.
>>
>> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
>> ---
>> drivers/target/target_core_alua.c | 101 +++++++++++++++++++
>> drivers/target/target_core_alua.h | 8 ++
>> drivers/target/target_core_configfs.c | 171 +++++++++++++++++++++++++++++++++
>> drivers/target/target_core_device.c | 1 +
>> drivers/target/target_core_transport.c | 28 +++++-
>> 5 files changed, 308 insertions(+), 1 deletion(-)
>>
>
> Applied, with one comment below..
>
> <SNIP>
>
>> diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
>> index e74ef8c..1dbc1bc 100644
>> --- a/drivers/target/target_core_configfs.c
>> +++ b/drivers/target/target_core_configfs.c
>> @@ -1741,6 +1741,176 @@ static struct target_core_configfs_attribute target_core_attr_dev_alua_lu_gp = {
>> .store = target_core_store_alua_lu_gp,
>> };
>>
>> +static ssize_t target_core_show_dev_lba_map(void *p, char *page)
>> +{
>> + struct se_device *dev = p;
>> + struct t10_alua_lba_map *map;
>> + struct t10_alua_lba_map_member *mem;
>> + char *b = page;
>> + int bl = 0;
>> + char state;
>> +
>> + spin_lock(&dev->t10_alua.lba_map_lock);
>> + if (!list_empty(&dev->t10_alua.lba_map_list))
>> + bl += sprintf(b + bl, "%u %u\n",
>> + dev->t10_alua.lba_map_segment_size,
>> + dev->t10_alua.lba_map_segment_multiplier);
>> + list_for_each_entry(map, &dev->t10_alua.lba_map_list, lba_map_list) {
>> + bl += sprintf(b + bl, "%llu %llu",
>> + map->lba_map_first_lba, map->lba_map_last_lba);
>> + list_for_each_entry(mem, &map->lba_map_mem_list,
>> + lba_map_mem_list) {
>> + switch (mem->lba_map_mem_alua_state) {
>> + case ALUA_ACCESS_STATE_ACTIVE_OPTIMIZED:
>> + state = 'O';
>> + break;
>> + case ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED:
>> + state = 'A';
>> + break;
>> + case ALUA_ACCESS_STATE_STANDBY:
>> + state = 'S';
>> + break;
>> + case ALUA_ACCESS_STATE_UNAVAILABLE:
>> + state = 'U';
>> + break;
>> + default:
>> + state = '.';
>> + break;
>> + }
>> + bl += sprintf(b + bl, " %d:%c",
>> + mem->lba_map_mem_alua_pg_id, state);
>> + }
>> + bl += sprintf(b + bl, "\n");
>> + }
>> + spin_unlock(&dev->t10_alua.lba_map_lock);
>
> The above loop can possibly overflow the passed *page..
>
No. This is the reverse operation to the constructor in
target_core_store_dev_lba_map().
Which (per definition) can only handle maps up to one page in size.
And hence the resulting (formatted) map as constructed by
target_core_show_dev_lba_map() will also fit on one page.
> Care to send an incremental patch for this as well..?
>
> Btw, I assume this is not the only method for extracting the LBA map
> from a running system, right..?
>
Of course you can run 'sg_referrals' here. But other than that it
would be the only method.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@xxxxxxx +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
