RE: 3.12.0: sda2: WRITE SAME failed. Manually zeroing. with 3w-xxxx driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




-----Original Message-----
From: Martin K. Petersen [mailto:martin.petersen@xxxxxxxxxx] 
Sent: Thursday, November 28, 2013 8:00 AM
To: Justin Piszcz
Cc: open list; linux-ext4@xxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx
Subject: Re: 3.12.0: sda2: WRITE SAME failed. Manually zeroing. with 3w-xxxx
driver

>>>>> "Justin" == Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx> writes:

Justin> Relevant logs: [178339.353519] 3w-sas: scsi0: ERROR:
Justin> (0x03:0x0101): Invalid command opcode:opcode=0x41.
Justin> [178339.353565] sda2: WRITE SAME failed. Manually zeroing.

Justin> Is this something I should be worried about? 

No, it just means that your 3ware controller does not handle the WRITE
SAME command and we fall back to manually writing out zeroes.

I posted a patch a while back that prevents WRITE SAME being issued for
controllers that do not pass the commands through to disk directly:

	http://marc.info/?l=linux-scsi&m=138252394614920&w=2

[ .. ]

Awesome, thank you!  This patch is over a month old, do you know if is
currently in mainline?  I'll also update my case with 3ware/LSI.

Justin.

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux