From: Vijaya Mohan Guvva <vmohan@xxxxxxxxxxx>
Observed Auto mode in the HBA side while doing manual D-Port test on the
switch side. Mode is not passed to BFA from firmware when the test is
triggered by switch side. BFA just blindly using Auto mode.
Signed-off-by: Vijaya Mohan Guvva <vmohan@xxxxxxxxxxx>
---
drivers/scsi/bfa/bfa_svc.c | 2 +-
drivers/scsi/bfa/bfi.h | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 6c41e57..625225f 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -6758,7 +6758,7 @@ bfa_dport_scn(struct bfa_dport_s *dport, struct bfi_diag_dport_scn_s *msg)
dport->rp_pwwn = msg->info.teststart.pwwn;
dport->rp_nwwn = msg->info.teststart.nwwn;
dport->lpcnt = cpu_to_be32(msg->info.teststart.numfrm);
- bfa_dport_result_start(dport, BFA_DPORT_OPMODE_AUTO);
+ bfa_dport_result_start(dport, msg->info.teststart.mode);
break;
case BFI_DPORT_SCN_SUBTESTSTART:
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index 7192e99..1d97a22 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -1144,7 +1144,8 @@ struct bfi_diag_dport_scn_teststart_s {
wwn_t pwwn; /* switch port wwn. 8 bytes */
wwn_t nwwn; /* switch node wwn. 8 bytes */
u8 type; /* bfa_diag_dport_test_type_e */
- u8 rsvd[3];
+ u8 mode; /* bfa_diag_dport_test_opmode */
+ u8 rsvd[2];
u32 numfrm; /* from switch uint in 1M */
};
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
