From: Vijaya Mohan Guvva <vmohan@xxxxxxxxxxx>
This patch addresses the issue of port not being registered with SCSI
layer on bfa or firmware initialization failure and subsequently failure
in collecting driver traces for debugging port init failures. Also it
has minor changes related to bfad state machine clean up.
Signed-off-by: Vijaya Mohan Guvva <vmohan@xxxxxxxxxxx>
---
drivers/scsi/bfa/bfad.c | 85 ++++++++++++++++++++++-----------------------
drivers/scsi/bfa/bfad_drv.h | 4 +--
2 files changed, 43 insertions(+), 46 deletions(-)
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index f8ca7be..bd17757 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -204,6 +204,7 @@ static void
bfad_sm_created(struct bfad_s *bfad, enum bfad_sm_event event)
{
unsigned long flags;
+ bfa_status_t ret;
bfa_trc(bfad, event);
@@ -217,7 +218,7 @@ bfad_sm_created(struct bfad_s *bfad, enum bfad_sm_event event)
if (bfad_setup_intr(bfad)) {
printk(KERN_WARNING "bfad%d: bfad_setup_intr failed\n",
bfad->inst_no);
- bfa_sm_send_event(bfad, BFAD_E_INTR_INIT_FAILED);
+ bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
break;
}
@@ -242,8 +243,26 @@ bfad_sm_created(struct bfad_s *bfad, enum bfad_sm_event event)
printk(KERN_WARNING
"bfa %s: bfa init failed\n",
bfad->pci_name);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_fcs_init(&bfad->bfa_fcs);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ ret = bfad_cfg_pport(bfad, BFA_LPORT_ROLE_FCP_IM);
+ if (ret != BFA_STATUS_OK) {
+ init_completion(&bfad->comp);
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfad->pport.flags |= BFAD_PORT_DELETE;
+ bfa_fcs_exit(&bfad->bfa_fcs);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ wait_for_completion(&bfad->comp);
+
+ bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
+ break;
+ }
bfad->bfad_flags |= BFAD_HAL_INIT_FAIL;
- bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
+ bfa_sm_send_event(bfad, BFAD_E_HAL_INIT_FAILED);
}
break;
@@ -273,12 +292,14 @@ bfad_sm_initializing(struct bfad_s *bfad, enum bfad_sm_event event)
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
retval = bfad_start_ops(bfad);
- if (retval != BFA_STATUS_OK)
+ if (retval != BFA_STATUS_OK) {
+ bfa_sm_set_state(bfad, bfad_sm_failed);
break;
+ }
bfa_sm_set_state(bfad, bfad_sm_operational);
break;
- case BFAD_E_INTR_INIT_FAILED:
+ case BFAD_E_INIT_FAILED:
bfa_sm_set_state(bfad, bfad_sm_uninit);
kthread_stop(bfad->bfad_tsk);
spin_lock_irqsave(&bfad->bfad_lock, flags);
@@ -286,7 +307,7 @@ bfad_sm_initializing(struct bfad_s *bfad, enum bfad_sm_event event)
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
break;
- case BFAD_E_INIT_FAILED:
+ case BFAD_E_HAL_INIT_FAILED:
bfa_sm_set_state(bfad, bfad_sm_failed);
break;
default:
@@ -310,13 +331,8 @@ bfad_sm_failed(struct bfad_s *bfad, enum bfad_sm_event event)
break;
case BFAD_E_STOP:
- if (bfad->bfad_flags & BFAD_CFG_PPORT_DONE)
- bfad_uncfg_pport(bfad);
- if (bfad->bfad_flags & BFAD_FC4_PROBE_DONE) {
- bfad_im_probe_undo(bfad);
- bfad->bfad_flags &= ~BFAD_FC4_PROBE_DONE;
- }
- bfad_stop(bfad);
+ bfa_sm_set_state(bfad, bfad_sm_fcs_exit);
+ bfa_sm_send_event(bfad, BFAD_E_FCS_EXIT_COMP);
break;
case BFAD_E_EXIT_COMP:
@@ -854,7 +870,7 @@ bfad_drv_init(struct bfad_s *bfad)
printk(KERN_WARNING
"Not enough memory to attach all Brocade HBA ports, %s",
"System may need more memory.\n");
- goto out_hal_mem_alloc_failure;
+ return BFA_STATUS_FAILED;
}
bfad->bfa.trcmod = bfad->trcmod;
@@ -871,31 +887,11 @@ bfad_drv_init(struct bfad_s *bfad)
bfad->bfa_fcs.trcmod = bfad->trcmod;
bfa_fcs_attach(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
bfad->bfa_fcs.fdmi_enabled = fdmi_enable;
- bfa_fcs_init(&bfad->bfa_fcs);
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
bfad->bfad_flags |= BFAD_DRV_INIT_DONE;
- /* configure base port */
- rc = bfad_cfg_pport(bfad, BFA_LPORT_ROLE_FCP_IM);
- if (rc != BFA_STATUS_OK)
- goto out_cfg_pport_fail;
-
return BFA_STATUS_OK;
-
-out_cfg_pport_fail:
- /* fcs exit - on cfg pport failure */
- spin_lock_irqsave(&bfad->bfad_lock, flags);
- init_completion(&bfad->comp);
- bfad->pport.flags |= BFAD_PORT_DELETE;
- bfa_fcs_exit(&bfad->bfa_fcs);
- spin_unlock_irqrestore(&bfad->bfad_lock, flags);
- wait_for_completion(&bfad->comp);
- /* bfa detach - free hal memory */
- bfa_detach(&bfad->bfa);
- bfad_hal_mem_release(bfad);
-out_hal_mem_alloc_failure:
- return BFA_STATUS_FAILED;
}
void
@@ -1039,13 +1035,19 @@ bfad_start_ops(struct bfad_s *bfad) {
/* FCS driver info init */
spin_lock_irqsave(&bfad->bfad_lock, flags);
bfa_fcs_driver_info_init(&bfad->bfa_fcs, &driver_info);
+
+ if (bfad->bfad_flags & BFAD_CFG_PPORT_DONE)
+ bfa_fcs_update_cfg(&bfad->bfa_fcs);
+ else
+ bfa_fcs_init(&bfad->bfa_fcs);
+
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
- /*
- * FCS update cfg - reset the pwwn/nwwn of fabric base logical port
- * with values learned during bfa_init firmware GETATTR REQ.
- */
- bfa_fcs_update_cfg(&bfad->bfa_fcs);
+ if (!(bfad->bfad_flags & BFAD_CFG_PPORT_DONE)) {
+ retval = bfad_cfg_pport(bfad, BFA_LPORT_ROLE_FCP_IM);
+ if (retval != BFA_STATUS_OK)
+ return BFA_STATUS_FAILED;
+ }
/* Setup fc host fixed attribute if the lk supports */
bfad_fc_host_init(bfad->pport.im_port);
@@ -1056,10 +1058,6 @@ bfad_start_ops(struct bfad_s *bfad) {
printk(KERN_WARNING "bfad_im_probe failed\n");
if (bfa_sm_cmp_state(bfad, bfad_sm_initializing))
bfa_sm_set_state(bfad, bfad_sm_failed);
- bfad_im_probe_undo(bfad);
- bfad->bfad_flags &= ~BFAD_FC4_PROBE_DONE;
- bfad_uncfg_pport(bfad);
- bfad_stop(bfad);
return BFA_STATUS_FAILED;
} else
bfad->bfad_flags |= BFAD_FC4_PROBE_DONE;
@@ -1429,7 +1427,6 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
return 0;
out_bfad_sm_failure:
- bfa_detach(&bfad->bfa);
bfad_hal_mem_release(bfad);
out_drv_init_failure:
/* Remove the debugfs node for this bfad */
@@ -1564,7 +1561,7 @@ restart_bfa(struct bfad_s *bfad)
if (bfad_setup_intr(bfad)) {
dev_printk(KERN_WARNING, &pdev->dev,
"%s: bfad_setup_intr failed\n", bfad->pci_name);
- bfa_sm_send_event(bfad, BFAD_E_INTR_INIT_FAILED);
+ bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
return -1;
}
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index 78d3401..cf56d3d 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -240,8 +240,8 @@ enum bfad_sm_event {
BFAD_E_KTHREAD_CREATE_FAILED = 2,
BFAD_E_INIT = 3,
BFAD_E_INIT_SUCCESS = 4,
- BFAD_E_INIT_FAILED = 5,
- BFAD_E_INTR_INIT_FAILED = 6,
+ BFAD_E_HAL_INIT_FAILED = 5,
+ BFAD_E_INIT_FAILED = 6,
BFAD_E_FCS_EXIT_COMP = 7,
BFAD_E_EXIT_COMP = 8,
BFAD_E_STOP = 9
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
