Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation
Document the DTS binding for the X-Gene SoC SATA PHY driver.
Signed-off-by: Loc Ho <lho@xxxxxxx>
Signed-off-by: Tuan Phan <tphan@xxxxxxx>
Signed-off-by: Suman Tripathi <stripathi@xxxxxxx>
Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>
Reviewed-by: Olof Johansson <olof@xxxxxxxxx>
---
.../devicetree/bindings/ata/apm-xgene.txt | 69 ++++++++++++++++++++
1 files changed, 69 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 0000000..d18db67
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,69 @@
+* APM X-Gene 6.0 Gb/s SATA PHY nodes
+
+SATA PHY nodes are defined to describe on-chip Serial ATA PHY. Each SATA PHY
+(pair of PHY) has its own node.
+
+Required properties:
+- compatible : Shall be "apm,xgene-ahci-phy"
+- reg : First memory resource shall be the PHY memory resource
+ Second memory resource shall be the optional PHY
+ memory resource if mux'ed with another IP
+- id : PHY ID (0 = first, 1 = second, 2 = third)
+- #phy-cells : Shall be 0
+
+Optional properties:
+- status : Shall be "ok" if enabled or "na" if disabled. Default
+ is "ok".
+- CTLE0 : PHY override parameters for channel 0 register REG1
+ field CTLE_EQ. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x2.
+- CTLE1 : PHY override parameters for channel 1 register REG1
+ field CTLE_EQ. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x2.
+- PQ0 : PHY override parameters for channel 0 register REG125
+ field PQ_REG. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0xA.
+- PQ1 : PHY override parameters for channel 1 register REG125
+ field PQ_REG. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0xA.
+- PQS0 : PHY override parameters for channel 0 register REG125
+ field PQ_SIGN. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x1.
+- PQS1 : PHY override parameters for channel 1 register REG125
+ field PQ_SIGN. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x1.
+- SPD0 : PHY override parameters for channel 0 register REG61
+ field PQ_SIGN. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x5.
+- SPD1 : PHY override parameters for channel 1 register REG61
+ field PQ_SIGN. First value for Gen1, second value
+ for Gen2, and third value for Gen3. Default is 0x5.
+
+NOTE: PHY override parameters are board specific setting.
+
+Example:
+ sataphy0: sataphy@1f210000 {
+ compatible = "apm,xgene-ahci-phy";
+ id = <0>;
+ reg = <0x0 0x1f210000 0x0 0x10000>;
+ #phy-cells = <0>;
+ status = "na";
+ };
+
+ sataphy1: sataphy@1f220000 {
+ compatible = "apm,xgene-ahci-phy";
+ id = <1>;
+ reg = <0x0 0x1f220000 0x0 0x10000>;
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
+ sataphy2: sataphy@1f230000 {
+ compatible = "apm,xgene-ahci-phy";
+ id = <2>;
+ reg = <0x0 0x1f230000 0x0 0x10000
+ 0x0 0x1f2d0000 0x0 0x10000 >;
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
