PROBLEM: special sense code asc,ascq=04h,0Ch abort scsi scan in the middle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi James,

[1.] One line summary of the problem:
special sense code asc,ascq=04h,0Ch abort scsi scan in the middle

[2.] Full description of the problem/report:
For instance, storage represents 8 iscsi LUNs, however the LUN No.7 is not well configured or has something wrong.
Then messages received:
kernel: scsi 5:0:0:0: Unexpected response from lun 7 while scanning, scan aborted
Which will make LUN No.8 unavailable.
It's confirmed that Windows and Solaris systems will continue the scan and make LUN No.1,2,3,4,5,6 and 8 available.

Log snippet is as below:
Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: scsi scan: INQUIRY pass 1 length 36
Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: Send: 0xffff8801e9bd4280
Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: CDB: Inquiry: 12 00 00 00 24 00 Aug 24 00:32:49 vmhodtest019 kernel: buffer = 0xffff8801f71fc180, bufflen = 36, queuecommand 0xffffffffa00b99e7
Aug 24 00:32:49 vmhodtest019 kernel: leaving scsi_dispatch_cmnd()
Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: Done: 0xffff8801e9bd4280 SUCCESS Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: Result: hostbyte=DID_OK driverbyte=DRIVER_OK Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: CDB: Inquiry: 12 00 00 00 24 00 Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: Sense Key : Not Ready [current] Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: Add. Sense: Logical unit not accessible, target port in unavailable state
Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:7: scsi host busy 1 failed 0
Aug 24 00:32:49 vmhodtest019 kernel: 0 sectors total, 36 bytes done.
Aug 24 00:32:49 vmhodtest019 kernel: scsi scan: INQUIRY failed with code 0x8000002 Aug 24 00:32:49 vmhodtest019 kernel: scsi 5:0:0:0: Unexpected response from lun 7 while scanning, scan aborted

According to scsi_report_lun_scan(), I found:
Linux use an inquiry command to probe a lun according to the result of report_lun command. It assumes every probe cmd will get a legal result. Otherwise, it regards the whole peripheral not exist or dead. If the return of inquiry passes its legal checking and indicates 'LUN not present', it won't break but also continue with the scan process. In the log, inquiry to LUN7 return a sense - asc,ascq=04h,0Ch (Logical unit not accessible, target port in unavailable state). And this is ignored, so scsi_probe_lun() returns -EIO and the scan process is aborted.

I have two questions:
1. Is it correct for hardware to return a sense 04h,0Ch to inquiry again, even after presenting this lun in responce to REPORT_LUN command? 2. Since windows and solaris can continue scan, is it reasonable for linux to do the same, even for a fault-tolerance purpose?

Below is information of our storage setting:
Storage array is configured as a cluster mode, and there is a "default" target group and "default" initiator group exist on the storage that includes the target nodename of both the nodes in the cluster and all initiator names respectively. In the partner node, there was lun mapped to the default target group/initiator group and having the ID 7. Since that lun is owner by the partner node, the SCSI inquiry was failing on it and as a result the initiator aborts the scan.

Thanks,
Vaughan
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux