Tuomas,
I might still have a copy of the manual somewhere from way back, if you
haven't found it anywhere. Would be on an old disk or even hardcopy in
storage, so please confirm you still need it.
Cheers,
Michael
Am 13.09.2013 um 03:36 schrieb Tuomas Vainikka:
On 09/11/2013 05:48 PM, Geert Uytterhoeven wrote:
On Wed, Sep 11, 2013 at 12:12 PM, Michael Schmitz
<schmitzmic@xxxxxxxxx> wrote:
problem. Using PIO, only the first byte of the tag message comes
through. It
might not be esp_scsi's fault, but there seems to be an assumption
that all
devices support TCQ. Also, no SCSI-2 features seem to be enabled in
the chip
by esp_scsi.
I'd have to check with DaveM, but such an assumption might in fact
exist.
BTW, it would be nice to start CCing linux-scsi@xxxxxxxxxxxxxxx and
David S. Miller <davem@xxxxxxxxxxxxx> on future discussions.
Gr{oetje,eeting}s,
Geert
Hello,
Does anyone have the register descriptions for the FAS216 chip? It
would seem that receiving only one byte during reconnect is perfectly
normal [1] unless SCSI-2 features are explicitly enabled (which
esp_scsi doesn't seem to be doing).
Also, looking at the timeout formulae in the old NCR53C9x.c driver,
the values would be different for FAS216. Why was this dropped from
the modern esp_scsi?
1. Page 2 in
http://www.datasheetarchive.com/dl/Scans-030/ScansU9X12569.pdf
-Tuomas
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
