The data byte count field of PRDT indicates the length of data block
which is a segment of data transfer for SCSI commands. The value of
this field shall have Dword granularity and the the maximum of length
is 256KB.
This adjusts dma pad mask and max segment size to the above-mentioned
PRDT limitations.
Signed-off-by: Akinobu Mita <mita@xxxxxxxxxxxx>
Cc: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
Cc: Vinayak Holikatti <vinholikatti@xxxxxxxxx>
Cc: Santosh Y <santoshsy@xxxxxxxxx>
Cc: "James E.J. Bottomley" <JBottomley@xxxxxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
---
* Change from v1
- Add comments for PRDT limitations as suggested by Subhash Jadavani
drivers/scsi/ufs/ufshcd.c | 15 +++++++++++++++
drivers/scsi/ufs/ufshci.h | 5 +++++
2 files changed, 20 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a2abe9a..660792e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1918,6 +1918,20 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
}
/**
+ * ufshcd_slave_configure - adjust SCSI device configurations
+ * @sdev: pointer to SCSI device
+ */
+static int ufshcd_slave_configure(struct scsi_device *sdev)
+{
+ struct request_queue *q = sdev->request_queue;
+
+ blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
+ blk_queue_max_segment_size(q, PRDT_DATA_BYTE_COUNT_MAX);
+
+ return 0;
+}
+
+/**
* ufshcd_slave_destroy - remove SCSI device configurations
* @sdev: pointer to SCSI device
*/
@@ -2748,6 +2762,7 @@ static struct scsi_host_template ufshcd_driver_template = {
.proc_name = UFSHCD,
.queuecommand = ufshcd_queuecommand,
.slave_alloc = ufshcd_slave_alloc,
+ .slave_configure = ufshcd_slave_configure,
.slave_destroy = ufshcd_slave_destroy,
.eh_abort_handler = ufshcd_abort,
.eh_device_reset_handler = ufshcd_device_reset,
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 0475c66..b2b7004 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -296,6 +296,11 @@ enum {
MASK_OCS = 0x0F,
};
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024)
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD 4
+
/**
* struct ufshcd_sg_entry - UFSHCI PRD Entry
* @base_addr: Lower 32bit physical address DW-0
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
