The MSIx to be created for SKH-R adapter should be based on
eq_count returned by get_fw_config.
Signed-off-by: John Soni Jose <sony.john-n@xxxxxxxxxx>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxx>
---
drivers/scsi/be2iscsi/be_main.c | 45 +++++++++++++++++++++++++--------------
drivers/scsi/be2iscsi/be_main.h | 3 ++-
drivers/scsi/be2iscsi/be_mgmt.c | 11 ++++++++++
3 files changed, 42 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 4bec9e2..af3ec3a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3768,8 +3768,19 @@ static void find_num_cpus(struct beiscsi_hba *phba)
BEISCSI_MAX_NUM_CPUS : num_cpus;
break;
case BE_GEN4:
- phba->num_cpus = (num_cpus > OC_SKH_MAX_NUM_CPUS) ?
- OC_SKH_MAX_NUM_CPUS : num_cpus;
+ /*
+ * If eqid_count == 1 fall back to
+ * INTX mechanism
+ **/
+ if (phba->fw_config.eqid_count == 1) {
+ enable_msix = 0;
+ phba->num_cpus = 1;
+ return;
+ }
+
+ phba->num_cpus =
+ (num_cpus > (phba->fw_config.eqid_count - 1)) ?
+ (phba->fw_config.eqid_count - 1) : num_cpus;
break;
default:
phba->num_cpus = 1;
@@ -5285,20 +5296,6 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
phba->generation = 0;
}
- if (enable_msix)
- find_num_cpus(phba);
- else
- phba->num_cpus = 1;
-
- beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
- "BM_%d : num_cpus = %d\n",
- phba->num_cpus);
-
- if (enable_msix) {
- beiscsi_msix_enable(phba);
- if (!phba->msix_enabled)
- phba->num_cpus = 1;
- }
ret = be_ctrl_init(phba, pcidev);
if (ret) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
@@ -5330,6 +5327,22 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
"BM_%d : Error getting fw config\n");
goto free_port;
}
+
+ if (enable_msix)
+ find_num_cpus(phba);
+ else
+ phba->num_cpus = 1;
+
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+ "BM_%d : num_cpus = %d\n",
+ phba->num_cpus);
+
+ if (enable_msix) {
+ beiscsi_msix_enable(phba);
+ if (!phba->msix_enabled)
+ phba->num_cpus = 1;
+ }
+
phba->shost->max_id = phba->params.cxns_per_ctrl;
beiscsi_get_params(phba);
phba->shost->can_queue = phba->params.ios_per_ctrl;
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 3fa1e81..88291b0 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -65,7 +65,6 @@
#define MAX_CPUS 64
#define BEISCSI_MAX_NUM_CPUS 7
-#define OC_SKH_MAX_NUM_CPUS 31
#define BEISCSI_VER_STRLEN 32
@@ -377,6 +376,8 @@ struct beiscsi_hba {
* for cid to cri conversion
*/
unsigned int phys_port;
+ unsigned int eqid_count;
+ unsigned int cqid_count;
unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT];
#define BEISCSI_GET_CID_COUNT(phba, ulp_num) \
(phba->fw_config.iscsi_cid_count[ulp_num])
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index d3deb3f..fb61b58 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -311,6 +311,17 @@ int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
struct be_fw_cfg *pfw_cfg;
pfw_cfg = req;
+ if (!is_chip_be2_be3r(phba)) {
+ phba->fw_config.eqid_count = pfw_cfg->eqid_count;
+ phba->fw_config.cqid_count = pfw_cfg->cqid_count;
+
+ beiscsi_log(phba, KERN_INFO,
+ BEISCSI_LOG_INIT,
+ "BG_%d : EQ_Count : %d CQ_Count : %d\n",
+ phba->fw_config.eqid_count,
+ phba->fw_config.cqid_count);
+ }
+
for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
if (pfw_cfg->ulp[ulp_num].ulp_mode &
BEISCSI_ULP_ISCSI_INI_MODE)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
