From: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
For supported ISPS, Read asic temperature by calling the
GET PARAMS (type C) mailbox command.
Signed-off-by: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
Signed-off-by: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_attr.c | 6 ----
drivers/scsi/qla2xxx/qla_dbg.c | 4 ++-
drivers/scsi/qla2xxx/qla_def.h | 3 --
drivers/scsi/qla2xxx/qla_gbl.h | 2 +
drivers/scsi/qla2xxx/qla_init.c | 1 -
drivers/scsi/qla2xxx/qla_mbx.c | 61 ++++++++++++++++++++------------------
drivers/scsi/qla2xxx/qla_mr.c | 1 -
drivers/scsi/qla2xxx/qla_nx.c | 8 +++++
drivers/scsi/qla2xxx/qla_nx2.c | 8 +++++
9 files changed, 53 insertions(+), 41 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8e8b50e..93f3783 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1300,12 +1300,6 @@ qla2x00_thermal_temp_show(struct device *dev,
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
uint16_t temp = 0;
- if (!vha->hw->thermal_support) {
- ql_log(ql_log_warn, vha, 0x70db,
- "Thermal not supported by this card.\n");
- goto done;
- }
-
if (qla2x00_reset_active(vha)) {
ql_log(ql_log_warn, vha, 0x70dc, "ISP reset active.\n");
goto done;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index ecaafe4..aa31f7a 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -14,6 +14,8 @@
* | Module Init and Probe | 0x0151 | 0x4b,0xba,0xfa |
* | Mailbox commands | 0x1181 | 0x111a-0x111b |
* | | | 0x1155-0x1158 |
+ * | | | 0x1018-0x1019 |
+ * | | | 0x10ca |
* | Device Discovery | 0x2095 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
* | | | 0x2016 |
@@ -37,7 +39,7 @@
* | | | 0x70a5,0x70a6, |
* | | | 0x70a8,0x70ab, |
* | | | 0x70ad-0x70ae, |
- * | | | 0x70d1-0x70da, |
+ * | | | 0x70d1-0x70db, |
* | | | 0x7047,0x703b |
* | Task Management | 0x803d | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index f393d24..a494e2e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3304,9 +3304,6 @@ struct qla_hw_data {
struct mr_data_fx00 mr;
struct qlt_hw_data tgt;
- uint16_t thermal_support;
-#define THERMAL_SUPPORT_I2C BIT_0
-#define THERMAL_SUPPORT_ISP BIT_1
};
/*
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index dc14ac2..d03b15d 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -685,6 +685,8 @@ extern int qla81xx_get_led_config(scsi_qla_host_t *, uint16_t *);
extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int);
extern char *qdev_state(uint32_t);
extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
+extern int qla82xx_read_temperature(scsi_qla_host_t *);
+extern int qla8044_read_temperature(scsi_qla_host_t *);
/* BSG related functions */
extern int qla24xx_bsg_request(struct fc_bsg_job *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 71cbdeb..91df7a5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -524,7 +524,6 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
vha->flags.reset_active = 0;
ha->flags.pci_channel_io_perm_failure = 0;
ha->flags.eeh_busy = 0;
- ha->thermal_support = THERMAL_SUPPORT_I2C|THERMAL_SUPPORT_ISP;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ce76110..1261884 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4608,40 +4608,43 @@ qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp)
struct qla_hw_data *ha = vha->hw;
uint8_t byte;
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ca,
- "Entered %s.\n", __func__);
-
- if (ha->thermal_support & THERMAL_SUPPORT_I2C) {
- rval = qla2x00_read_sfp(vha, 0, &byte,
- 0x98, 0x1, 1, BIT_13|BIT_12|BIT_0);
- *temp = byte;
- if (rval == QLA_SUCCESS)
- goto done;
-
- ql_log(ql_log_warn, vha, 0x10c9,
- "Thermal not supported through I2C bus, trying alternate "
- "method (ISP access).\n");
- ha->thermal_support &= ~THERMAL_SUPPORT_I2C;
+ if (!IS_FWI2_CAPABLE(ha) || IS_QLA24XX_TYPE(ha) || IS_QLA81XX(ha)) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1150,
+ "Thermal not supported by this card.\n");
+ return rval;
}
- if (ha->thermal_support & THERMAL_SUPPORT_ISP) {
- rval = qla2x00_read_asic_temperature(vha, temp);
- if (rval == QLA_SUCCESS)
- goto done;
-
- ql_log(ql_log_warn, vha, 0x1019,
- "Thermal not supported through ISP.\n");
- ha->thermal_support &= ~THERMAL_SUPPORT_ISP;
+ if (IS_QLA25XX(ha)) {
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ ha->pdev->subsystem_device == 0x0175) {
+ rval = qla2x00_read_sfp(vha, 0, &byte,
+ 0x98, 0x1, 1, BIT_13|BIT_0);
+ *temp = byte;
+ return rval;
+ }
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+ ha->pdev->subsystem_device == 0x338e) {
+ rval = qla2x00_read_sfp(vha, 0, &byte,
+ 0x98, 0x1, 1, BIT_15|BIT_14|BIT_0);
+ *temp = byte;
+ return rval;
+ }
+ ql_dbg(ql_dbg_mbx, vha, 0x10c9,
+ "Thermal not supported by this card.\n");
+ return rval;
}
- ql_log(ql_log_warn, vha, 0x1150,
- "Thermal not supported by this card "
- "(ignoring further requests).\n");
- return rval;
+ if (IS_QLA82XX(ha)) {
+ *temp = qla82xx_read_temperature(vha);
+ rval = QLA_SUCCESS;
+ return rval;
+ } else if (IS_QLA8044(ha)) {
+ *temp = qla8044_read_temperature(vha);
+ rval = QLA_SUCCESS;
+ return rval;
+ }
-done:
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1018,
- "Done %s.\n", __func__);
+ rval = qla2x00_read_asic_temperature(vha, temp);
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index be60a77..e087a49 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2062,7 +2062,6 @@ qlafx00_initialize_adapter(scsi_qla_host_t *vha)
vha->flags.reset_active = 0;
ha->flags.pci_channel_io_perm_failure = 0;
ha->flags.eeh_busy = 0;
- ha->thermal_support = 0;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index b3e48f5..11ce53d 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3327,6 +3327,14 @@ static int qla82xx_check_temp(scsi_qla_host_t *vha)
return 0;
}
+int qla82xx_read_temperature(scsi_qla_host_t *vha)
+{
+ uint32_t temp;
+
+ temp = qla82xx_rd_32(vha->hw, CRB_TEMP_STATE);
+ return qla82xx_get_temp_val(temp);
+}
+
void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 005cd6b..712a9bb 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -1945,6 +1945,14 @@ qla8044_check_temp(struct scsi_qla_host *vha)
return 0;
}
+int qla8044_read_temperature(scsi_qla_host_t *vha)
+{
+ uint32_t temp;
+
+ temp = qla8044_rd_direct(vha, QLA8044_CRB_TEMP_STATE_INDEX);
+ return qla82xx_get_temp_val(temp);
+}
+
/**
* qla8044_check_fw_alive - Check firmware health
* @ha: Pointer to host adapter structure.
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
