On 08/19/2013 01:26 PM, Evgeny wrote: > I've tried 3.10.2 and it's also affected. > > Could you recommend something else? Could you enable LIST_DEBUG in your kernel hacking and retry? It looks like it bug_on list not empty as expected, some ascb->list may need &asd_ha->seq.pend_q_lock protection, you need to figure out your self. PS: the aic94xx is out of maintain for some years as I see. You may need to update to newer hardware. Jack > > > 19.08.2013 12:03, Jack Wang пишет: >> On 08/16/2013 10:26 AM, Evgeny wrote: >>> Hello. >>> >>> I've been testing vanilla 3.4.45 (config attached), 3.4.56 kernels on >>> centos 5.9 with Adaptec AIC-9410W SAS controller: >> There's some fix in libsas about error handle , As I remember most of >> patch finally merged in 3.7, could you try newer kernel? >> >> KR >> Jack >>> ------------ >>> 09:02.0 RAID bus controller: Adaptec AIC-9410W SAS (Razor ASIC RAID) >>> (rev 09) >>> Subsystem: Super Micro Computer Inc Device 9280 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ >>> Stepping- SERR+ FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 64 (32000ns min, 26750ns max), Cache Line Size: 32 bytes >>> Interrupt: pin A routed to IRQ 18 >>> Region 0: Memory at d8300000 (64-bit, non-prefetchable) [size=256K] >>> Region 2: Memory at d8000000 (64-bit, prefetchable) [size=128K] >>> Region 4: I/O ports at 3000 [size=256] >>> [virtual] Expansion ROM at d8080000 [disabled] [size=512K] >>> Capabilities: [40] PCI-X non-bridge device >>> Command: DPERE- ERO- RBC=4096 OST=8 >>> Status: Dev=09:02.0 64bit+ 133MHz+ SCD- USC- DC=simple >>> DMMRBC=4096 DMOST=8 DMCRS=128 RSCEM- 266MHz- 533MHz- >>> Capabilities: [58] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [e0] MSI: Enable- Count=1/4 Maskable- 64bit+ >>> Address: 0000000000000000 Data: 0000 >>> Kernel driver in use: aic94xx >>> Kernel modules: aic94xx >>> ---------- >>> >>> Under a heavy load made by bonnie: >>> >>> ---------- >>> bonnie++ -d /tmp/test -x 10000 -s 24g -u root >>> ---------- >>> >>> after 8-14 hours system gets kernel panic (log attached). >>> >>> Could anyone help with it? >>> >>> >>> Thanks! >>> Evgeny >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
