Change looks good except few minor comments.
On 7/26/2013 7:18 PM, Seungwon Jeon wrote:
Setting PA_PWRMode using DME_SET triggers the power mode
change. And then the result will be given by the HCS.UPMCRS.
This operation should be done atomically.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 80 ++++++++++++++++++++++++++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 3 ++
drivers/scsi/ufs/ufshci.h | 12 +++++++
3 files changed, 91 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 8277c40..ffda72d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -36,9 +36,11 @@
#include <linux/async.h>
#include "ufshcd.h"
+#include "unipro.h"
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
+ UIC_POWER_MODE |\
UFSHCD_ERROR_MASK)
/* UIC command timeout, unit: ms */
#define UIC_CMD_TIMEOUT 500
@@ -359,6 +361,18 @@ static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
}
/**
+ * ufshcd_get_upmcrs - Get the power mode change request status
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets the UPMCRS field of HCS register
+ * Returns value of UPMCRS field
+ */
+static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
+{
+ return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7;
+}
+
+/**
* ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
* @hba: per adapter instance
* @uic_cmd: UIC command
@@ -907,6 +921,60 @@ out:
EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);
/**
+ * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
+ * using DME_SET primitives.
+ * @hba: per adapter instance
+ * @mode: powr mode value
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+{
+ struct uic_command uic_cmd = {0};
+ struct completion pwr_done;
+ unsigned long flags;
+ u8 status;
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_SET;
+ uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
+ uic_cmd.argument3 = mode;
+ init_completion(&pwr_done);
+
+ mutex_lock(&hba->uic_cmd_mutex);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->pwr_done = &pwr_done;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ ret = __ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret) {
+ dev_err(hba->dev, "pwr mode change uic error %d\n", ret);
we should also print the power "mode" which we were trying to set here.
+ goto out;
+ }
+
+ if (!wait_for_completion_timeout(hba->pwr_done,
+ msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
+ dev_err(hba->dev, "pwr mode change completion timeout\n");
we should also print the power "mode" which we were trying to set here.
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = ufshcd_get_upmcrs(hba);
+ if (status != PWR_LOCAL) {
+ dev_err(hba->dev,
+ "pwr mode change failed, host umpcrs:0x%x\n",
+ status);
+ ret = (status != PWR_OK) ? status : -1;
+ }
+out:
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->pwr_done = NULL;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ mutex_unlock(&hba->uic_cmd_mutex);
+ return ret;
+}
+
+/**
* ufshcd_make_hba_operational - Make UFS controller operational
* @hba: per adapter instance
*
@@ -1336,16 +1404,20 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
/**
* ufshcd_uic_cmd_compl - handle completion of uic command
* @hba: per adapter instance
+ * @intr_status: interrupt status generated by the controller
*/
-static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
+static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
{
- if (hba->active_uic_cmd) {
+ if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
hba->active_uic_cmd->argument2 |=
ufshcd_get_uic_cmd_result(hba);
hba->active_uic_cmd->argument3 =
ufshcd_get_dme_attr_val(hba);
complete(&hba->active_uic_cmd->done);
}
+
+ if ((intr_status & UIC_POWER_MODE) && hba->pwr_done)
+ complete(hba->pwr_done);
}
/**
@@ -1447,8 +1519,8 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
if (hba->errors)
ufshcd_err_handler(hba);
- if (intr_status & UIC_COMMAND_COMPL)
- ufshcd_uic_cmd_compl(hba);
+ if (intr_status & UFSHCD_UIC_MASK)
+ ufshcd_uic_cmd_compl(hba, intr_status);
if (intr_status & UTP_TASK_REQ_COMPL)
ufshcd_tmc_handler(hba);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 50bcd29..246c0e1 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -142,6 +142,7 @@ struct ufshcd_lrb {
* @uic_cmd_mutex: mutex for uic command
* @ufshcd_tm_wait_queue: wait queue for task management
* @tm_condition: condition variable for task management
+ * @pwr_done: completion for powr mode change
typo: s/powr/power
* @ufshcd_state: UFSHCD states
* @intr_mask: Interrupt Mask Bits
* @feh_workq: Work queue for fatal controller error handling
@@ -180,6 +181,8 @@ struct ufs_hba {
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
+ struct completion *pwr_done;
+
u32 ufshcd_state;
u32 intr_mask;
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index df4901e..d92fd9c 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -124,6 +124,9 @@ enum {
#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL |\
+ UIC_POWER_MODE)
+
#define UFSHCD_ERROR_MASK (UIC_ERROR |\
DEVICE_FATAL_ERROR |\
CONTROLLER_FATAL_ERROR |\
@@ -142,6 +145,15 @@ enum {
#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+enum {
+ PWR_OK = 0x0,
+ PWR_LOCAL = 0x01,
+ PWR_REMOTE = 0x02,
+ PWR_BUSY = 0x03,
+ PWR_ERROR_CAP = 0x04,
+ PWR_FATAL_ERROR = 0x05,
+};
+
/* HCE - Host Controller Enable 34h */
#define CONTROLLER_ENABLE UFS_BIT(0)
#define CONTROLLER_DISABLE 0x0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
