Re: [PATCH 3/7] scsi: ufs: fix the setting interrupt aggregation counter

[Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>]

On 7/26/2013 7:16 PM, Seungwon Jeon wrote:
> LACTH(Interrupt aggregation counter threshold) value is allowed

I guess you mean "IACTH" not "LACTH". Other than this, change looks good 
to me.
Reviewed-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
> up to 0x1F and current setting value is the maximum.
> This value is related with NUTRS(max:0x20) of HCI's capability.
> Considering HCI controller doesn't support the maximum, LATCH
> setting should be adjusted with possible value.
> For that, existing 'ufshcd_config_int_aggr' is split into two part
> [reset, configure].
>
> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> ---
>   drivers/scsi/ufs/ufshcd.c |   53 +++++++++++++++++++++-----------------------
>   drivers/scsi/ufs/ufshci.h |    4 +-
>   2 files changed, 27 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 688ae0e..7152ec4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -43,6 +43,9 @@
>   /* UIC command timeout, unit: ms */
>   #define UIC_CMD_TIMEOUT	500
>   
> +/* Interrupt aggregation default timeout, unit: 40us */
> +#define INT_AGGR_DEF_TO	0x02
> +
>   enum {
>   	UFSHCD_MAX_CHANNEL	= 0,
>   	UFSHCD_MAX_ID		= 1,
> @@ -65,12 +68,6 @@ enum {
>   	UFSHCD_INT_CLEAR,
>   };
>   
> -/* Interrupt aggregation options */
> -enum {
> -	INT_AGGR_RESET,
> -	INT_AGGR_CONFIG,
> -};
> -
>   /**
>    * ufshcd_get_intr_mask - Get the interrupt bit mask
>    * @hba - Pointer to adapter instance
> @@ -233,30 +230,30 @@ ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr)
>   }
>   
>   /**
> - * ufshcd_config_int_aggr - Configure interrupt aggregation values.
> - *		Currently there is no use case where we want to configure
> - *		interrupt aggregation dynamically. So to configure interrupt
> - *		aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
> - *		INT_AGGR_TIMEOUT_VALUE are used.
> + * ufshcd_reset_intr_aggr - Reset interrupt aggregation values.
>    * @hba: per adapter instance
> - * @option: Interrupt aggregation option
>    */
>   static inline void
> -ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
> +ufshcd_reset_intr_aggr(struct ufs_hba *hba)
>   {
> -	switch (option) {
> -	case INT_AGGR_RESET:
> -		ufshcd_writel(hba, INT_AGGR_ENABLE |
> -			      INT_AGGR_COUNTER_AND_TIMER_RESET,
> -			      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
> -		break;
> -	case INT_AGGR_CONFIG:
> -		ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
> -			      INT_AGGR_COUNTER_THRESHOLD_VALUE |
> -			      INT_AGGR_TIMEOUT_VALUE,
> -			      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
> -		break;
> -	}
> +	ufshcd_writel(hba, INT_AGGR_ENABLE |
> +		      INT_AGGR_COUNTER_AND_TIMER_RESET,
> +		      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
> +}
> +
> +/**
> + * ufshcd_config_intr_aggr - Configure interrupt aggregation values.
> + * @hba: per adapter instance
> + * @cntr_thld: Interrupt aggregation counter threshold
> + * @timeout: Interrupt aggregation timeout value
> + */
> +static inline void
> +ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 timeout)
> +{
> +	ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
> +		      INT_AGGR_COUNTER_THLD_VAL(cnt) |
> +		      INT_AGGR_TIMEOUT_VAL(timeout),
> +		      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
>   }
>   
>   /**
> @@ -853,7 +850,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
>   	ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
>   
>   	/* Configure interrupt aggregation */
> -	ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
> +	ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
>   
>   	/* Configure UTRL and UTMRL base address registers */
>   	ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
> @@ -1299,7 +1296,7 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
>   	hba->outstanding_reqs ^= completed_reqs;
>   
>   	/* Reset interrupt aggregation counters */
> -	ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
> +	ufshcd_reset_intr_aggr(hba);
>   }
>   
>   /**
> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
> index d5c5f14..a8f69cc 100644
> --- a/drivers/scsi/ufs/ufshci.h
> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -226,8 +226,8 @@ enum {
>   
>   #define MASK_UIC_COMMAND_RESULT			0xFF
>   
> -#define INT_AGGR_COUNTER_THRESHOLD_VALUE	(0x1F << 8)
> -#define INT_AGGR_TIMEOUT_VALUE			(0x02)
> +#define INT_AGGR_COUNTER_THLD_VAL(c)	(((c) & 0x1F) << 8)
> +#define INT_AGGR_TIMEOUT_VAL(t)		(((t) & 0xFF) << 0)
>   
>   /* Interrupt disable masks */
>   enum {

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html