Re: [PATCH] scsi_prep_fn() check for empty queue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/26/13 11:02, Maxim Uvarov wrote:
This fix:
end_request: I/O error, dev sdc, sector 976576
  rport-0:0-3: blocked FC remote port time out: removing target and saving
binding
BUG: unable to handle kernel NULL pointer dereference at 0000000000000400
IP: [<ffffffff812f0cc2>] scsi_prep_state_check+0xe/0x99
  [<ffffffff812f1f9d>] scsi_setup_blk_pc_cmnd+0x1b/0x115
  [<ffffffff812f20c0>] scsi_prep_fn+0x29/0x3b
  [<ffffffff8121cfb9>] blk_peek_request+0xe1/0x1b3
  [<ffffffff812f1400>] scsi_request_fn+0x3a/0x4d2
  [<ffffffff8121d916>] __generic_unplug_device+0x32/0x36
  [<ffffffff81220f4b>] blk_execute_rq_nowait+0x77/0x9e
  [<ffffffff81221018>] blk_execute_rq+0xa6/0xde
  [<ffffffff8144f24b>] ? printk+0x41/0x46
  [<ffffffffa00a21c5>] ? get_rdac_req+0x81/0xe8 [scsi_dh_rdac]
  [<ffffffffa00a273a>] send_mode_select+0x29f/0x489 [scsi_dh_rdac]
  [<ffffffff810c5d9b>] ? probe_workqueue_execution+0xb1/0xce
  [<ffffffff81071e38>] worker_thread+0x1a9/0x237
  [<ffffffffa00a249b>] ? send_mode_select+0x0/0x489 [scsi_dh_rdac]
  [<ffffffff8107651b>] ? autoremove_wake_function+0x0/0x39
  [<ffffffff81071c8f>] ? worker_thread+0x0/0x237
  [<ffffffff81076222>] kthread+0x7f/0x87
  [<ffffffff81012d2a>] child_rip+0xa/0x20
  [<ffffffff810761a3>] ? kthread+0x0/0x87
  [<ffffffff81012d20>] ? child_rip+0x0/0x20
Signed-off-by: Maxim Uvarov <maxim.uvarov@xxxxxxxxxx>
---
  drivers/scsi/scsi_lib.c |    3 +++
  1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 86d5220..8e89ed9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1295,6 +1295,9 @@ int scsi_prep_fn(struct request_queue *q, struct request *req)
  	struct scsi_device *sdev = q->queuedata;
  	int ret = BLKPREP_KILL;

+	if (!sdev)
+		return ret;
+
  	if (req->cmd_type == REQ_TYPE_BLOCK_PC)
  		ret = scsi_setup_blk_pc_cmnd(sdev, req);
  	return scsi_prep_return(q, req, ret);

Sorry but this patch does not look like a proper fix to me. What you probably need is a scsi_device_get() call in scsi_dh_rdac.c somewhere before the queue_work(kmpath_rdacd, &ctlr->ms_work) call and a scsi_device_put() call once send_mode_select() has finished using the sdev.

Bart.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux