The patch updates some new IOA Status Code(IOASC) in ipr driver.
Signed-off-by: Wen Xiong <wenxiong@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/ipr.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c 2013-05-30 12:40:37.000000000 -0500
+++ b/drivers/scsi/ipr.c 2013-06-03 20:56:31.127964230 -0500
@@ -281,12 +281,22 @@ struct ipr_error_table_t ipr_error_table
"FFF6: Failure prediction threshold exceeded"},
{0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,
"8009: Impending cache battery pack failure"},
+ {0x02040100, 0, 0,
+ "Logical Unit in process of becoming ready"},
+ {0x02040200, 0, 0,
+ "Initializing command required"},
{0x02040400, 0, 0,
"34FF: Disk device format in progress"},
+ {0x02040C00, 0, 0,
+ "Logical unit not accessible, target port in unavailable state"},
{0x02048000, 0, IPR_DEFAULT_LOG_LEVEL,
"9070: IOA requested reset"},
{0x023F0000, 0, 0,
"Synchronization required"},
+ {0x02408500, 0, 0,
+ "IOA microcode download required"},
+ {0x02408600, 0, 0,
+ "Device bus connection is prohibited by host"},
{0x024E0000, 0, 0,
"No ready, IOA shutdown"},
{0x025A0000, 0, 0,
@@ -385,6 +395,8 @@ struct ipr_error_table_t ipr_error_table
"4030: Incorrect multipath connection"},
{0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,
"4110: Unsupported enclosure function"},
+ {0x04679800, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4120: SAS cable VPD cannot be read"},
{0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Command to logical unit failed"},
{0x05240000, 1, 0,
@@ -407,10 +419,18 @@ struct ipr_error_table_t ipr_error_table
"Illegal request, command sequence error"},
{0x052C8000, 1, 0,
"Illegal request, dual adapter support not enabled"},
+ {0x052C8100, 1, 0,
+ "Illegal request, another cable connector was physically disable"},
+ {0x054E8000, 1, 0,
+ "Illegal request, inconsistent group id/group count"},
{0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,
"9031: Array protection temporarily suspended, protection resuming"},
{0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,
"9040: Array protection temporarily suspended, protection resuming"},
+ {0x060B0100, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4080: IOA exceeded maximum operating temperature"},
+ {0x060B8000, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4085: Service required"},
{0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,
"3140: Device bus not ready to ready transition"},
{0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -423,6 +443,8 @@ struct ipr_error_table_t ipr_error_table
"FFFB: SCSI bus was reset by another initiator"},
{0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,
"3029: A device replacement has occurred"},
+ {0x063F8300, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4102: Device bus fabric performance degradation"},
{0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,
"9051: IOA cache data exists for a missing or failed device"},
{0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -445,6 +467,14 @@ struct ipr_error_table_t ipr_error_table
"9076: Configuration error, missing remote IOA"},
{0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,
"4050: Enclosure does not support a required multipath function"},
+ {0x06679800, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4121: Configuration error, required cable is missing"},
+ {0x06679900, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4122: Cable is not plugged into the correct location on remote IOA"},
+ {0x06679A00, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4123: Configuration error, invalid cable vital product data"},
+ {0x06679B00, 0, IPR_DEFAULT_LOG_LEVEL,
+ "4124: Configuration error, both cable ends are plugged into the same IOA"},
{0x06690000, 0, IPR_DEFAULT_LOG_LEVEL,
"4070: Logically bad block written on device"},
{0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -507,10 +537,18 @@ struct ipr_error_table_t ipr_error_table
"9062: One or more disks are missing from an array"},
{0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,
"9063: Maximum number of functional arrays has been exceeded"},
+ {0x07279A00, 0, 0,
+ "Data protect, other volume set problem"},
{0x0B260000, 0, 0,
"Aborted command, invalid descriptor"},
+ {0x0B3F9000, 0, 0,
+ "Target operating conditions have changed, dua adapter takeover"},
+ {0x0B530200, 0, 0,
+ "Aborted command, medium removal prevented"},
{0x0B5A0000, 0, 0,
- "Command terminated by host"}
+ "Command terminated by host"},
+ {0x0B5B8000, 0, 0,
+ "Aborted command, command terminated by host"}
};
static const struct ipr_ses_table_entry ipr_ses_table[] = {
--
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
