Update balance count in driver to be in sync of firmware. Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxx> Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxx> --- diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c index a11df82..b06a240 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -503,8 +503,9 @@ u8 megasas_get_best_arm(struct LD_LOAD_BALANCE_INFO *lbInfo, u8 arm, u64 block, diff1 = ABS_DIFF(block, lbInfo->last_accessed_block[1]); bestArm = (diff0 <= diff1 ? 0 : 1); - if ((bestArm == arm && pend0 > pend1 + 16) || - (bestArm != arm && pend1 > pend0 + 16)) + /*Make balance count from 16 to 4 to keep driver in sync with Firmware*/ + if ((bestArm == arm && pend0 > pend1 + 4) || + (bestArm != arm && pend1 > pend0 + 4)) bestArm ^= 1; /* Update the last accessed block on the correct pd */ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
