James,
any outlook for this one?
[PATCH] scsi_debug: Fix endianess in partition table
Thanks,
Martin
On Fri, 2013-03-01 at 09:19 +0000, James Bottomley wrote:
> This is an assorted set of stragglers into the merge window with driver
> updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes
> pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree
> (updates to fcoe and libfc)
>
> The patch is available here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus
>
> The short changelog is:
>
> Adam Radford (3):
> megaraid_sas: Version and Changelog update
> megaraid_sas: Dont load DevHandle unless FastPath enabled
> megaraid_sas: Add 4k FastPath DIF support
>
> Al Viro (1):
> debris left by " libfcoe: Remove mutex_trylock/restart_syscall checks"
>
> Andrew Vasquez (2):
> qla2xxx: Correct list-iteration bug in Report-ID Acquisition codes.
> qla2xxx: Correct race in loop_state assignment during reset handling.
>
> Arun Easi (3):
> qla2xxx: Prevent enabling target mode for unsupported HBAs.
> qla2xxx: Allow ISP81xx to create ATIO queues.
> qla2xxx: Enable target mode support for ISP83xx.
>
> Bhanu Prakash Gollapudi (2):
> libfcoe: Check for unusable FCFs before looking for conflicting FCFs
> libfcoe: Handle CVL while waiting to select an FCF
>
> Brian King (1):
> ipr: Fix oops while resetting an ipr adapter
>
> Chad Dupuis (8):
> qla2xxx: Wait for IDC complete event to finish loopback operation.
> qla2xxx: Don't process RSCNs for a vport on the same physical adapter.
> qla2xxx: Move loopback mode reset after chip reset check.
> qla2xxx: Extra loopback error handling for ISP83xx.
> qla2xxx: Unload hangs after issuing BSG commands to vport.
> qla2xxx: Reject loopback request if one is already in progress.
> qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low.
> qla2xxx: Determine the number of outstanding commands based on available resources.
>
> Dan Carpenter (3):
> dc395x: uninitialized variable in device_alloc()
> libosd: check for kzalloc() failure
> qla4xxx: don't free NULL dma pool
>
> David Howells (2):
> UAPI: (Scripted) Disintegrate include/scsi/fc
> UAPI: (Scripted) Disintegrate include/scsi
>
> Giridhar Malavali (1):
> qla2xxx: Update the FTP site references in the driver sources.
>
> Hiral Patel (5):
> fnic: Fnic Trace Utility
> fnic: New debug flags and debug log messages
> fnic: fnic driver may hit BUG_ON on device reset
> fnic: Fix SGEs limit
> fnic: fixing issues in device and firmware reset code
>
> Joe Carnuccio (7):
> qla2xxx: Integrate generic card temperature with mezz card temperature.
> qla2xxx: Add setting of driver version string for vendor application.
> qla2xxx: Correction of comment in MBC opcode defines.
> Revert "[SCSI] qla2xxx: Optimize existing port name server query matching."
> Revert "[SCSI] qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
> qla2xxx: Do link initialization on get loop id failure.
> qla2xxx: Print thermal unsupported message.
>
> K. Y. Srinivasan (3):
> storvsc: Handle dynamic resizing of the device
> storvsc: Restructure error handling code on command completion
> storvsc: Initialize the sglist
>
> Krishna Mohan (1):
> libfc: XenServer fails to mount root filesystem.
>
> Martin K. Petersen (1):
> Fix range check in scsi_host_dif_capable()
>
> Masanari Iida (1):
> qla2xxx: Avoid null pointer dereference in shutdown routine.
>
> Neerav Parikh (1):
> fcoe: Fix deadlock while deleting FCoE interface with NPIV ports
>
> Neil Horman (1):
> fcoe: close race on link speed detection in fcoe code
>
> Olaf Hering (1):
> storvsc: avoid usage of WRITE_SAME
>
> Paul Bolle (2):
> aacraid: suppress two GCC warnings
> qla2xxx: silence two GCC warnings.
>
> Randy Dunlap (1):
> scsi: fix lpfc build when wmb() is defined as mb()
>
> Robert Love (7):
> libfc, libfcoe, fcoe: Convert debug_logging macros to pr_info
> bnx2fc: Use the fcoe_sysfs control interface
> fcoe: Use the fcoe_sysfs control interface
> libfcoe, fcoe, bnx2fc: Add new fcoe control interface
> libfcoe: Add fcoe_sysfs debug logging level
> libfcoe: Save some memory and optimize name lookups
> Documentation: Add missing devices/ to devices path
>
> Sakthivel K (1):
> pm80xx: fix for memory region free
>
> Saurav Kashyap (6):
> qla2xxx: Don't process state change aen for reset owner.
> qla2xxx: Update the copyright information.
> qla2xxx: Display the lock owner on lock acquire failure.
> qla2xxx: Do MPI reset only for ISP81xx.
> qla2xxx: Get VPD information from common location for CNA.
> qla2xxx: Correction to the message ids.
>
> Shuah Khan (1):
> hpsa: Check for dma_mapping_error in hpsa_map_one
>
> Sreekanth Reddy (1):
> mpt2sas: Add support for OEM specific controller
>
> Stephen M. Cameron (4):
> hpsa: check for dma_mapping_error in hpsa_passthru ioctls
> hpsa: reorganize error handling in hpsa_passthru_ioctl
> hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
> hpsa: Check for dma_mapping_error for all code paths using fill_cmd
>
> Vasu Dev (1):
> libfc: fix REC handling
>
> Vinayak Holikatti (2):
> ufs: Separate PCI code into glue driver
> ufs: Segregate PCI Specific Code
>
> Xiangliang Yu (1):
> mvsas: fixed timeout issue when removing module
>
> Yi Zou (7):
> bnx2fc: use fcoe_get_lesb/fcoe_ctlr_get_lesb() directly from libfcoe
> bnx2fc: use fcoe_link_speed_update() from the exported symbol in libfcoe
> bnx2fc: add support to get_netdev for bnx2f_interface
> libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesb
> libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export it
> fcoe: add support to the get_netdev() for fcoe_interface
> fcoe: prep work to start consolidate the usage of fcoe_netdev
>
> And the diffstat:
>
> Documentation/ABI/testing/sysfs-bus-fcoe | 45 +-
> Documentation/scsi/ChangeLog.megaraid_sas | 9 +
> drivers/scsi/aacraid/src.c | 4 +-
> drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 256 +++++-----
> drivers/scsi/dc395x.c | 2 +-
> drivers/scsi/fcoe/fcoe.c | 266 ++++++----
> drivers/scsi/fcoe/fcoe.h | 6 +-
> drivers/scsi/fcoe/fcoe_ctlr.c | 45 +-
> drivers/scsi/fcoe/fcoe_sysfs.c | 186 +++++--
> drivers/scsi/fcoe/fcoe_transport.c | 199 +++++++-
> drivers/scsi/fcoe/libfcoe.h | 20 +-
> drivers/scsi/fnic/Makefile | 2 +
> drivers/scsi/fnic/fnic.h | 60 +++
> drivers/scsi/fnic/fnic_debugfs.c | 314 ++++++++++++
> drivers/scsi/fnic/fnic_io.h | 6 +-
> drivers/scsi/fnic/fnic_main.c | 17 +
> drivers/scsi/fnic/fnic_scsi.c | 721 ++++++++++++++++++++++++++--
> drivers/scsi/fnic/fnic_trace.c | 273 +++++++++++
> drivers/scsi/fnic/fnic_trace.h | 90 ++++
> drivers/scsi/hpsa.c | 117 +++--
> drivers/scsi/ipr.c | 33 +-
> drivers/scsi/ipr.h | 1 +
> drivers/scsi/libfc/fc_fcp.c | 6 +-
> drivers/scsi/libfc/fc_libfc.h | 38 +-
> drivers/scsi/libfc/fc_rport.c | 2 +-
> drivers/scsi/lpfc/lpfc_sli.c | 56 +--
> drivers/scsi/megaraid/megaraid_sas.h | 6 +-
> drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
> drivers/scsi/megaraid/megaraid_sas_fusion.c | 5 +-
> drivers/scsi/megaraid/megaraid_sas_fusion.h | 1 -
> drivers/scsi/mpt2sas/mpt2sas_base.c | 8 +
> drivers/scsi/mpt2sas/mpt2sas_base.h | 6 +
> drivers/scsi/mvsas/mv_sas.c | 10 +-
> drivers/scsi/mvsas/mv_sas.h | 1 +
> drivers/scsi/osd/osd_initiator.c | 4 +
> drivers/scsi/pm8001/pm8001_init.c | 3 +-
> drivers/scsi/qla2xxx/qla_attr.c | 35 +-
> drivers/scsi/qla2xxx/qla_bsg.c | 199 +++++---
> drivers/scsi/qla2xxx/qla_bsg.h | 2 +-
> drivers/scsi/qla2xxx/qla_dbg.c | 17 +-
> drivers/scsi/qla2xxx/qla_dbg.h | 2 +-
> drivers/scsi/qla2xxx/qla_def.h | 54 ++-
> drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
> drivers/scsi/qla2xxx/qla_fw.h | 7 +-
> drivers/scsi/qla2xxx/qla_gbl.h | 15 +-
> drivers/scsi/qla2xxx/qla_gs.c | 10 +-
> drivers/scsi/qla2xxx/qla_init.c | 200 ++++++--
> drivers/scsi/qla2xxx/qla_inline.h | 28 +-
> drivers/scsi/qla2xxx/qla_iocb.c | 39 +-
> drivers/scsi/qla2xxx/qla_isr.c | 82 +++-
> drivers/scsi/qla2xxx/qla_mbx.c | 207 ++++++--
> drivers/scsi/qla2xxx/qla_mid.c | 9 +-
> drivers/scsi/qla2xxx/qla_nx.c | 13 +-
> drivers/scsi/qla2xxx/qla_nx.h | 4 +-
> drivers/scsi/qla2xxx/qla_os.c | 147 +++++-
> drivers/scsi/qla2xxx/qla_settings.h | 2 +-
> drivers/scsi/qla2xxx/qla_sup.c | 18 +-
> drivers/scsi/qla2xxx/qla_target.c | 169 ++++++-
> drivers/scsi/qla2xxx/qla_target.h | 19 +-
> drivers/scsi/qla2xxx/qla_version.h | 2 +-
> drivers/scsi/qla4xxx/ql4_mbx.c | 6 +-
> drivers/scsi/storvsc_drv.c | 137 ++++--
> drivers/scsi/ufs/Kconfig | 74 +--
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs.h | 44 +-
> drivers/scsi/ufs/ufshcd-pci.c | 211 ++++++++
> drivers/scsi/ufs/ufshcd.c | 423 ++++------------
> drivers/scsi/ufs/ufshcd.h | 202 ++++++++
> drivers/scsi/ufs/ufshci.h | 44 +-
> include/scsi/Kbuild | 3 -
> include/scsi/fc/Kbuild | 4 -
> include/scsi/fcoe_sysfs.h | 11 +-
> include/scsi/libfcoe.h | 32 +-
> include/scsi/scsi_host.h | 4 +-
> include/uapi/scsi/Kbuild | 3 +
> include/uapi/scsi/fc/Kbuild | 4 +
> include/{ => uapi}/scsi/fc/fc_els.h | 0
> include/{ => uapi}/scsi/fc/fc_fs.h | 0
> include/{ => uapi}/scsi/fc/fc_gs.h | 0
> include/{ => uapi}/scsi/fc/fc_ns.h | 0
> include/{ => uapi}/scsi/scsi_bsg_fc.h | 0
> include/{ => uapi}/scsi/scsi_netlink.h | 0
> include/{ => uapi}/scsi/scsi_netlink_fc.h | 0
> 83 files changed, 4100 insertions(+), 1205 deletions(-)
> create mode 100644 drivers/scsi/fnic/fnic_debugfs.c
> create mode 100644 drivers/scsi/fnic/fnic_trace.c
> create mode 100644 drivers/scsi/fnic/fnic_trace.h
> create mode 100644 drivers/scsi/ufs/ufshcd-pci.c
> create mode 100644 drivers/scsi/ufs/ufshcd.h
> rename include/{ => uapi}/scsi/fc/fc_els.h (100%)
> rename include/{ => uapi}/scsi/fc/fc_fs.h (100%)
> rename include/{ => uapi}/scsi/fc/fc_gs.h (100%)
> rename include/{ => uapi}/scsi/fc/fc_ns.h (100%)
> rename include/{ => uapi}/scsi/scsi_bsg_fc.h (100%)
> rename include/{ => uapi}/scsi/scsi_netlink.h (100%)
> rename include/{ => uapi}/scsi/scsi_netlink_fc.h (100%)
>
> James
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
