[PATCH 6/8] qla4xxx: Fix debug level to avoid floods of same message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>

Move "Incorrect function ID" print message in case INTX interrupt
from DEBUG2 to DEBUG7. This will avoid floods of this message if
DEBUG2 is enabled.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
---
 drivers/scsi/qla4xxx/ql4_dbg.h | 7 +++++++
 drivers/scsi/qla4xxx/ql4_isr.c | 8 ++++----
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index 5b0afc1..51c365b 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -12,6 +12,7 @@
 /* #define QL_DEBUG_LEVEL_3  */		/* Output function tracing */
 /* #define QL_DEBUG_LEVEL_4  */
 /* #define QL_DEBUG_LEVEL_5  */
+/* #define QL_DEBUG_LEVEL_7  */
 /* #define QL_DEBUG_LEVEL_9  */
 
 #define QL_DEBUG_LEVEL_2	/* ALways enable error messagess */
@@ -48,6 +49,12 @@
 #define DEBUG5(x)	do {} while (0);
 #endif				/*  */
 
+#if defined(QL_DEBUG_LEVEL_7)
+#define DEBUG7(x)	do {x; } while (0)
+#else				/*  */
+#define DEBUG7(x)	do {} while (0)
+#endif				/*  */
+
 #if defined(QL_DEBUG_LEVEL_9)
 #define DEBUG9(x)	do {x;} while (0);
 #else				/*  */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 1b83dc2..e02a884 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -1099,8 +1099,8 @@ irqreturn_t qla4_82xx_intr_handler(int irq, void *dev_id)
 
 	status = qla4_82xx_rd_32(ha, ISR_INT_STATE_REG);
 	if (!ISR_IS_LEGACY_INTR_TRIGGERED(status)) {
-		DEBUG2(ql4_printk(KERN_INFO, ha,
-		    "%s legacy Int not triggered\n", __func__));
+		DEBUG7(ql4_printk(KERN_INFO, ha,
+				  "%s legacy Int not triggered\n", __func__));
 		return IRQ_NONE;
 	}
 
@@ -1158,7 +1158,7 @@ irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id)
 
 	/* Legacy interrupt is valid if bit31 of leg_int_ptr is set */
 	if (!(leg_int_ptr & LEG_INT_PTR_B31)) {
-		DEBUG2(ql4_printk(KERN_ERR, ha,
+		DEBUG7(ql4_printk(KERN_ERR, ha,
 				  "%s: Legacy Interrupt Bit 31 not set, spurious interrupt!\n",
 				  __func__));
 		return IRQ_NONE;
@@ -1166,7 +1166,7 @@ irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id)
 
 	/* Validate the PCIE function ID set in leg_int_ptr bits [19..16] */
 	if ((leg_int_ptr & PF_BITS_MASK) != ha->pf_bit) {
-		DEBUG2(ql4_printk(KERN_ERR, ha,
+		DEBUG7(ql4_printk(KERN_ERR, ha,
 				  "%s: Incorrect function ID 0x%x in legacy interrupt register, ha->pf_bit = 0x%x\n",
 				  __func__, (leg_int_ptr & PF_BITS_MASK),
 				  ha->pf_bit));
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux