RESENT ---------- Forwarded message ---------- From: Fabio David <fabiodavid@xxxxxxxxx> Date: Thu, Feb 21, 2013 at 5:42 PM Subject: Re: [usb-storage] Issue with mini-SaS to eSATA to USB 3.0 setup Thanks for your reply, Matt. But it works! Only sometimes the OS doesnt "see" hot-insertion / hot-remove. And if I connect the USB/eSata directly to PC (without the USB 3.0 hub), it works 100%, never miss an insertion/removal! I have created some UDEV mounting rules, and they work fine, no mather in which bay the HDD has been inserted. The problem is that sometimes it can not recognize a hot-insert (which is not a big problem, the user just has to remove/insert it again). But the major problem occurs when it cannot detect a hot-removal, because the device stays mounted, partitions still appear at /proc/partitions, etc. as if the HDD was still there. Fabio On Thu, Feb 21, 2013 at 5:16 PM, Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx> wrote: > > I highly doubt hot-insert and hot-remove of HDDs from the 4-bay > container (without removing the corresponding USB/eSATA adaptor) will > work. > > The USB/eSATA adaptor does not have a way to inform the host that the > eSATA side has been disconnected from the HDD. That functionality > isn't in the usb-storage protocol. > > This type of functionality *might* be supported in the UAS protocol, > but I don't know. > > Matt > > On Thu, Feb 21, 2013 at 11:26 AM, Sarah Sharp > <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote: > > Cc-ing the SCSI and USB storage list. > > > > Folks, does the attached picture look like a sane setup? I've never > > used mini-SaS to eSATA adapter before, let alone with four eSATA to USB > > 3.0 adapters. > > > > On Tue, Jan 29, 2013 at 12:56:02PM -0200, Fabio David wrote: > >> Hi Sarah, > >> > >> My name is Fabio David and I am from Brazil. I've seen your posts on > >> several forums and read articles about you. I really admire your work. > >> > >> Maybe you can help me. I'm trying to connect a PC running Centos 6.3 > >> to a CRU dataport 4-bay storage device. This device only has a miniSaS > >> port. > >> > >> Here is my scenario: > >> > >> - DataCRU device with 4 hot-swapables bays. > >> http://www.cru-inc.com/slideshow.php?dir=//Digital-Cinema//&sel=5 > >> - MiniSaS cable connects to the DataCRU device and on the other side > >> there are 4 eSata connectors > >> http://www.elpeus.com/sas-mini-sas/external-mini-sas-cables/sff-8088-to-4-esata/3m-mini-sas-sff-8088-to-4-esata-cable/ > >> - 4 eSata<->USB3.0 adaptors connected to each eSata connector > >> - Adaptors connected to a USB3.0 HUB > >> - USB3.0 hub connected to PC > >> > >> Everything works ok, I can mount/read the HDs, but sometimes the > >> system does not detect when a hard drive is inserted/removed from a > >> DataCru bay. No events are generated, nothing appears in > >> /proc/partitions nor udev > >> is called to apply my rules. > > > > Do you lose only hard drive insertion events, or do you lose remove > > events as well? > > > > For example, what happens when you do this: > > > > 1. Unplug the eSATA to USB adapters from the USB 3.0 hub. > > 2. Insert a hard drive into the bay. > > 3. Connect the eSATA to USB adapter to the USB 3.0 hub. > > 4. Wait for hard drive detection, then hot-remove the drive from the > > bay. > > > >> However, everything works fine when connected directly to PC's USB > >> port. Please look at the attached picture. > > > > It looks like you're only attaching one eSATA to USB adapter to the > > roothub. Do you only have one USB 3.0 port on the host, or can you try > > plugging in multiple eSATA to USB adapters into the roothub? > > > > Does the setup work when only one eSATA to USB adapter is plugged into > > the USB 3.0 hub? > > > >> Do you have any suggestions? > > > > A couple possible root causes come to mind: > > > > 1. Perhaps the USB 3.0 hub is interfering with communication to your > > eSATA to USB 3.0 adapters. > > > > 2. Maybe USB device suspend is to blame. Do you have USB device suspend > > enabled for the eSATA to USB adapters? > > > > 3. Perhaps the SATA adapters aren't responding with a Medium Changed > > status when the USB storage device is plugged in. > > > > Can you send me dmesg, starting from just before you insert a hard drive > > into the drive bays? I need dmesg for both when the SATA adapter is > > connected directly to the roothub, and when it's connected to the USB > > 3.0 hub. > > > > A usbmon trace might also be useful for the USB storage developers. > > Documentation on how to take that trace is here: > > > > http://lxr.linux.no/#linux/Documentation/usb/usbmon.txt > > > > Sarah Sharp > > > >> =================================================================== > >> > >> lsusb returns > >> > >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > >> Bus 001 Device 002: ID 13d3:3323 IMC Networks > >> Bus 001 Device 009: ID 2109:3431 <---------------------------- HUB 3.0 > >> Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >> Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > >> Bus 007 Device 040: ID 2109:0810 <---------------------------- HUB 3.0 > >> Bus 007 Device 041: ID 1234:5678 Brain Actuated Technologies > >> Bus 007 Device 042: ID 1234:5678 Brain Actuated Technologies > >> Bus 007 Device 043: ID 1234:5678 Brain Actuated Technologies > >> Bus 007 Device 044: ID 1234:5678 Brain Actuated Technologies > >> > >> /var/log/messages > >> .... > >> Jan 27 18:00:28 localhost kernel: usb 7-1: New USB device found, > >> idVendor=2109, idProduct=0810 > >> Jan 27 18:00:28 localhost kernel: usb 7-1: New USB device strings: > >> Mfr=1, Product=2, SerialNumber=0 > >> Jan 27 18:00:28 localhost kernel: usb 7-1: Product: 4-Port USB 3.0 Hub > >> Jan 27 18:00:28 localhost kernel: usb 7-1: Manufacturer: VIA Labs, Inc. > >> Jan 27 18:00:28 localhost kernel: usb 7-1: configuration #1 chosen from 1 choice > >> Jan 27 18:00:28 localhost kernel: hub 7-1:1.0: USB hub found > >> Jan 27 18:00:28 localhost kernel: hub 7-1:1.0: 4 ports detected > >> .... > >> Jan 28 21:32:02 localhost kernel: usb 7-1.1: new SuperSpeed USB device > >> number 9 using xhci_hcd > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: PCI INT A -> > >> GSI 16 (level, low) -> IRQ 16 > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: new USB bus > >> registered, assigned bus number 6 > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: irq 16, io > >> mem 0xdfe00000 > >> Jan 28 21:32:56 localhost kernel: usb usb6: Manufacturer: Linux > >> 2.6.32-279.19.1.el6.i686 xhci_hcd > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller > >> Jan 28 21:32:56 localhost kernel: xhci_hcd 0000:01:00.0: new USB bus > >> registered, assigned bus number 7 > >> Jan 28 21:32:56 localhost kernel: usb usb7: Manufacturer: Linux > >> 2.6.32-279.19.1.el6.i686 xhci_hcd > >> Jan 28 21:32:56 localhost kernel: usb 7-1: new SuperSpeed USB device > >> number 2 using xhci_hcd > >> Jan 28 21:32:56 localhost kernel: usb 7-1.1: new SuperSpeed USB device > >> number 3 using xhci_hcd > >> Jan 28 21:32:56 localhost kernel: usb 7-1.2: new SuperSpeed USB device > >> number 4 using xhci_hcd > >> Jan 28 21:32:56 localhost kernel: usb 7-1.3: new SuperSpeed USB device > >> number 5 using xhci_hcd > >> Jan 28 21:32:56 localhost kernel: usb 7-1.4: new SuperSpeed USB device > >> number 6 using xhci_hcd > > > > > > -- > > You received this message because you are subscribed to the Google Groups "USB Mass Storage on Linux" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to usb-storage+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxxx. > > To post to this group, send email to usb-storage@xxxxxxxxxxxxxxxxxxxxxxxx. > > Visit this group at http://groups.google.com/a/lists.one-eyed-alien.net/group/usb-storage/?hl=en. > > For more options, visit https://groups.google.com/a/lists.one-eyed-alien.net/groups/opt_out. > > > > > > > > -- > Matthew Dharm > Maintainer, USB Mass Storage driver for Linux -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
