On Thu, Feb 21, 2013 at 05:27:00PM -0300, Fabio David wrote:
> On Thu, Feb 21, 2013 at 4:26 PM, Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
> On Tue, Jan 29, 2013 at 12:56:02PM -0200, Fabio David wrote:
> > > Do you have any suggestions?
> >
> > A couple possible root causes come to mind:
> >
> > 1. Perhaps the USB 3.0 hub is interfering with communication to your
> > eSATA to USB 3.0 adapters.
> >
> > 2. Maybe USB device suspend is to blame. Do you have USB device suspend
> > enabled for the eSATA to USB adapters?
>
> I am not sure, I thought it was disabled by default. How can I check?
It is disabled by default. I just wanted to make sure an installed udev
script wasn't enabling auto-suspend.
You can check whether auto-suspend is enabled by running powertop and
looking for the lines that correspond to the USB 3.0 to eSATA adapters.
If they say 'Bad', device suspend is disabled. If they say 'Good',
device suspend is enabled.
Or you can find the power/control entries for the devices in
/sys/bus/usb/devices/ and make sure they say 'on' rather than 'auto'.
E.g.
sarah@xanatos:~$ lsusb
Bus 001 Device 002: ID 050d:0413 Belkin Components
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Bus 001 Device 004: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 004: ID 04f2:b2ea Chicony Electronics Co., Ltd
sarah@xanatos:~$ lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/3p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/8p, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/3p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 3: Dev 3, If 1, Class=HID, Driver=usbhid, 1.5M
|__ Port 4: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
sarah@xanatos:~$ cd /sys/bus/usb/devices/
sarah@xanatos:/sys/bus/usb/devices$ ls
1-0:1.0 1-1 1-1:1.0 1-1.3 1-1.3:1.0 1-1.3:1.1 1-1.4 1-1.4:1.0 2-0:1.0 3-0:1.0 3-1 3-1:1.0 3-1.6 3-1.6:1.0 3-1.6:1.1 4-0:1.0 4-1 4-1:1.0 usb1 usb2 usb3 usb4
sarah@xanatos:/sys/bus/usb/devices$ cat 1-1.4/idVendor
046d
sarah@xanatos:/sys/bus/usb/devices$ cat 1-1.4/power/control
on
sarah@xanatos:/sys/bus/usb/devices$
That means my USB mouse is 'on', so device auto-suspend is disabled.
Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
