Obsolete now; either use 'max_lun' if the host supports only a
limited number of LUNs or BLIST_NOLUN if the target has problems
addressing more than one LUN.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/Kconfig | 14 --------------
drivers/scsi/dc395x.c | 9 +--------
drivers/scsi/ncr53c8xx.h | 4 ----
drivers/scsi/scsi_scan.c | 4 ----
4 files changed, 1 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 142f632..9f43fd4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -197,20 +197,6 @@ config SCSI_ENCLOSURE
it has an enclosure device. Selecting this option will just allow
certain enclosure conditions to be reported and is not required.
-config SCSI_MULTI_LUN
- bool "Probe all LUNs on each SCSI device"
- depends on SCSI
- help
- Some devices support more than one LUN (Logical Unit Number) in order
- to allow access to several media, e.g. CD jukebox, USB card reader,
- mobile phone in mass storage mode. This option forces the kernel to
- probe for all LUNs by default. This setting can be overriden by
- max_luns boot/module parameter. Note that this option does not affect
- devices conforming to SCSI-3 or higher as they can explicitely report
- their number of LUNs. It is safe to say Y here unless you have one of
- those rare devices which reacts in an unexpected way when probed for
- multiple LUNs.
-
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
depends on SCSI
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 9acdb9c..733f11f 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -517,9 +517,7 @@ static struct ParameterData cfg_data[] = {
CFG_PARAM_UNSET,
0,
0x2f,
-#ifdef CONFIG_SCSI_MULTI_LUN
- NAC_SCANLUN |
-#endif
+ NAC_SCANLUN |
NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET
/*| NAC_ACTIVE_NEG*/,
NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET | 0x08
@@ -4432,15 +4430,10 @@ static void adapter_init_scsi_host(struct Scsi_Host *host)
if (host->max_id - 1 == eeprom->scsi_id)
host->max_id--;
-#ifdef CONFIG_SCSI_MULTI_LUN
if (eeprom->channel_cfg & NAC_SCANLUN)
host->max_lun = 8;
else
host->max_lun = 1;
-#else
- host->max_lun = 1;
-#endif
-
}
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index 0e008da..02901c5 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -264,11 +264,7 @@
#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
#define SCSI_NCR_TIMER_INTERVAL (HZ)
-#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
#define SCSI_NCR_MAX_LUN (16)
-#else
-#define SCSI_NCR_MAX_LUN (1)
-#endif
/*
* IO functions definition for big/little endian CPU support.
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index dd25df7..53c8f79 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -81,11 +81,7 @@ static const char *scsi_null_device_strs = "nullnullnullnull";
#define MAX_SCSI_LUNS 512
-#ifdef CONFIG_SCSI_MULTI_LUN
static uint64_t max_scsi_luns = MAX_SCSI_LUNS;
-#else
-static uint64_t max_scsi_luns = 1;
-#endif
module_param_named(max_luns, max_scsi_luns, ullong, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(max_luns,
--
1.7.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
