[PATCH 22/23] qla2xxx: Integrate generic card temperature with mezz card temperature.

[Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>]

From: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>

Give priority to I2C thermal.

Signed-off-by: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
Signed-off-by: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_attr.c |   33 +++++++++------
 drivers/scsi/qla2xxx/qla_dbg.c  |    2 +-
 drivers/scsi/qla2xxx/qla_def.h  |    5 ++-
 drivers/scsi/qla2xxx/qla_gbl.h  |    2 +-
 drivers/scsi/qla2xxx/qla_init.c |    2 +-
 drivers/scsi/qla2xxx/qla_mbx.c  |   82 ++++++++++++++++++++++++++++-----------
 6 files changed, 86 insertions(+), 40 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7256167..1d82eef 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1272,22 +1272,29 @@ qla2x00_thermal_temp_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
-	int rval = QLA_FUNCTION_FAILED;
-	uint16_t temp, frac;
+	uint16_t temp = 0;
 
-	if (!vha->hw->flags.thermal_supported)
-		return snprintf(buf, PAGE_SIZE, "\n");
+	if (!vha->hw->thermal_support) {
+		ql_log(ql_log_warn, vha, 0x70db,
+		    "Thermal not supported by this card.\n");
+		goto done;
+	}
 
-	temp = frac = 0;
-	if (qla2x00_reset_active(vha))
-		ql_log(ql_log_warn, vha, 0x707b,
-		    "ISP reset active.\n");
-	else if (!vha->hw->flags.eeh_busy)
-		rval = qla2x00_get_thermal_temp(vha, &temp, &frac);
-	if (rval != QLA_SUCCESS)
-		return snprintf(buf, PAGE_SIZE, "\n");
+	if (qla2x00_reset_active(vha)) {
+		ql_log(ql_log_warn, vha, 0x70dc, "ISP reset active.\n");
+		goto done;
+	}
+
+	if (vha->hw->flags.eeh_busy) {
+		ql_log(ql_log_warn, vha, 0x70dd, "PCI EEH busy.\n");
+		goto done;
+	}
+
+	if (qla2x00_get_thermal_temp(vha, &temp) == QLA_SUCCESS)
+		return snprintf(buf, PAGE_SIZE, "%d\n", temp);
 
-	return snprintf(buf, PAGE_SIZE, "%d.%02d\n", temp, frac);
+done:
+	return snprintf(buf, PAGE_SIZE, "\n");
 }
 
 static ssize_t
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 69d7a85..1626de5 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -12,7 +12,7 @@
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
  * | Module Init and Probe        |       0x0126       | 0x4b,0xba,0xfa |
- * | Mailbox commands             |       0x1158       | 0x111a-0x111b  |
+ * | Mailbox commands             |       0x115b       | 0x111a-0x111b  |
  * |                              |                    | 0x112c-0x112e  |
  * |                              |                    | 0x113a         |
  * | Device Discovery             |       0x2087       | 0x2020-0x2022, |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 992e240..c081882 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -864,6 +864,7 @@ typedef struct {
 #define	MBX_0		BIT_0
 
 #define RNID_TYPE_SET_VERSION	0x9
+#define RNID_TYPE_ASIC_TEMP	0xC
 
 /*
  * Firmware state codes from get firmware state mailbox command
@@ -2628,7 +2629,6 @@ struct qla_hw_data {
 		uint32_t	nic_core_hung:1;
 
 		uint32_t	quiesce_owner:1;
-		uint32_t	thermal_supported:1;
 		uint32_t	nic_core_reset_hdlr_active:1;
 		uint32_t	nic_core_reset_owner:1;
 		uint32_t	isp82xx_no_md_cap:1;
@@ -3076,6 +3076,9 @@ struct qla_hw_data {
 	int             cfg_lun_q_depth;
 
 	struct qlt_hw_data tgt;
+	uint16_t	thermal_support;
+#define THERMAL_SUPPORT_I2C BIT_0
+#define THERMAL_SUPPORT_ISP BIT_1
 };
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 02f11de..eb3ca21 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -55,7 +55,7 @@ extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
 extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
 extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
 
-extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *, uint16_t *);
+extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *);
 
 extern void qla84xx_put_chip(struct scsi_qla_host *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a1e5848..edf4d14 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -523,7 +523,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 	vha->flags.reset_active = 0;
 	ha->flags.pci_channel_io_perm_failure = 0;
 	ha->flags.eeh_busy = 0;
-	ha->flags.thermal_supported = 1;
+	ha->thermal_support = THERMAL_SUPPORT_I2C|THERMAL_SUPPORT_ISP;
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	atomic_set(&vha->loop_state, LOOP_DOWN);
 	vha->device_flags = DFLG_NO_CABLE;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 281947e..186dd59 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3924,6 +3924,39 @@ qla2x00_set_driver_version(scsi_qla_host_t *vha, char *version)
 	return rval;
 }
 
+static int
+qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1159,
+	    "Entered %s.\n", __func__);
+
+	mcp->mb[0] = MBC_GET_RNID_PARAMS;
+	mcp->mb[1] = RNID_TYPE_ASIC_TEMP << 8;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	*temp = mcp->mb[1];
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x115a,
+		    "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x115b,
+		    "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
 int
 qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
 	uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
@@ -4526,42 +4559,45 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 }
 
 int
-qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
+qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp)
 {
-	int rval;
-	uint8_t byte;
+	int rval = QLA_FUNCTION_FAILED;
 	struct qla_hw_data *ha = vha->hw;
+	uint8_t byte;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ca,
 	    "Entered %s.\n", __func__);
 
-	/* Integer part */
-	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1,
-		BIT_13|BIT_12|BIT_0);
-	if (rval != QLA_SUCCESS) {
-		ql_dbg(ql_dbg_mbx, vha, 0x10c9, "Failed=%x.\n", rval);
-		ha->flags.thermal_supported = 0;
-		goto fail;
+	if (ha->thermal_support & THERMAL_SUPPORT_I2C) {
+		rval = qla2x00_read_sfp(vha, 0, &byte,
+		    0x98, 0x1, 1, BIT_13|BIT_12|BIT_0);
+		*temp = byte;
+		if (rval == QLA_SUCCESS)
+			goto done;
+
+		ql_log(ql_log_warn, vha, 0x10c9,
+		    "Thermal not supported by I2C.\n");
+		ha->thermal_support &= ~THERMAL_SUPPORT_I2C;
 	}
-	*temp = byte;
 
-	/* Fraction part */
-	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1,
-		BIT_13|BIT_12|BIT_0);
-	if (rval != QLA_SUCCESS) {
-		ql_dbg(ql_dbg_mbx, vha, 0x1019, "Failed=%x.\n", rval);
-		ha->flags.thermal_supported = 0;
-		goto fail;
+	if (ha->thermal_support & THERMAL_SUPPORT_ISP) {
+		rval = qla2x00_read_asic_temperature(vha, temp);
+		if (rval == QLA_SUCCESS)
+			goto done;
+
+		ql_log(ql_log_warn, vha, 0x1019,
+		    "Thermal not supported by ISP.\n");
+		ha->thermal_support &= ~THERMAL_SUPPORT_ISP;
 	}
-	*frac = (byte >> 6) * 25;
 
-	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1018,
-	    "Done %s.\n", __func__);
-	return rval;
-fail:
 	ql_log(ql_log_warn, vha, 0x1150,
 	    "Thermal not supported by this card "
 	    "(ignoring further requests).\n");
+	return  rval;
+
+done:
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1018,
+	    "Done %s.\n", __func__);
 	return rval;
 }
 
-- 
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html