I've a Lenovo ThinkPad T420, where the dmesg output for various kernel
versions gives for the optical drive always:
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
However once (no kernel config change nor BIOS update nor ...) I got :
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Now I'm wondering about the speed difference. Both dmesg outputs are
attached to this message.
--
MfG/Sincerely
Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.1 (root@n22) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #3 SMP Sun Jan 6 19:57:09 CET 2013
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: LENOVO 4180F65/4180F65, BIOS 83ET73WW (1.43 ) 11/30/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21e600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FE0000000 write-back
8 base 21F000000 mask FFF000000 uncachable
9 base 21E800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01a3f000-0x01bfffff]
RAMDISK: [mem 0x1fe5d000-0x1ffeffff]
ACPI: RSDP 000f00e0 00024 (v02 LENOVO)
ACPI: XSDT daffe120 000A4 (v01 LENOVO TP-83 00001430 PTEC 00000002)
ACPI: FACP dafe8000 000F4 (v04 LENOVO TP-83 00001430 PTL 00000002)
ACPI: DSDT dafeb000 0E7BC (v01 LENOVO TP-83 00001430 INTL 20061109)
ACPI: FACS daf2d000 00040
ACPI: SLIC daffd000 00176 (v01 LENOVO TP-83 00001430 PTEC 00000001)
ACPI: SSDT daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET dafe7000 00038 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: APIC dafe6000 00098 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: MCFG dafe5000 0003C (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: ECDT dafe4000 00052 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: ASF! dafea000 000A5 (v32 LENOVO TP-83 00001430 PTL 00000002)
ACPI: TCPA dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI dafe0000 0003E (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: UEFI dafdf000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI dafde000 00292 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: Local APIC address 0xfee00000
7786MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x1e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xda99efff]
node 0: [mem 0xdafff000-0xdaffffff]
node 0: [mem 0x00000000-0x1e5fffff]
On node 0 totalpages: 2067245
free_area_init_node: node 0, pgdat c1522c40, node_mem_map f2739280
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3941 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 221552 pages, LIFO batch:31
HighMem zone: 19466 pages used for memmap
HighMem zone: 1820056 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f26bf000 s30720 r0 d22528 u53248
pcpu-alloc: s30720 r0 d22528 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045549
Kernel command line: real_root=/dev/sdb3 rootfstype=ext4 resume=/dev/sdb2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 17772416 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0021e600)
Memory: 8153912k/8886272k available (3846k kernel code, 115068k reserved, 1437k data, 444k init, 7358088k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1529000 - 0xc1598000 ( 444 kB)
.data : 0xc13c1ae2 - 0xc1528f40 (1437 kB)
.text : 0xc1000000 - 0xc13c1ae2 (3846 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f100a000 soft=f100c000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2591.606 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5183.21 BogoMIPS (lpj=2591606)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
debug: unmapping init [mem 0xc1598000-0xc159cfff]
ACPI: Core revision 20120913
ftrace: allocating 15634 entries in 31 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f10ca000 soft=f10cc000
Initializing CPU#1
Disabled fast string operations
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f10fe000 soft=f1100000
Initializing CPU#2
Disabled fast string operations
#2
CPU 3 irqstacks, hard=f1116000 soft=f1118000
Initializing CPU#3
Disabled fast string operations
#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (20732.84 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x50b0-0x50b7]
pci 0000:00:16.3: reg 14: [mem 0xf252c000-0xf252cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff]
pci 0000:00:19.0: reg 18: [io 0x5080-0x509f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af]
pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf]
pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7]
pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb]
pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xdf9fffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed4c000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-fe]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0024-0x0025]
pnp 00:02: [io 0x0028-0x0029]
pnp 00:02: [io 0x002c-0x002d]
pnp 00:02: [io 0x0030-0x0031]
pnp 00:02: [io 0x0034-0x0035]
pnp 00:02: [io 0x0038-0x0039]
pnp 00:02: [io 0x003c-0x003d]
pnp 00:02: [io 0x00a4-0x00a5]
pnp 00:02: [io 0x00a8-0x00a9]
pnp 00:02: [io 0x00ac-0x00ad]
pnp 00:02: [io 0x00b0-0x00b5]
pnp 00:02: [io 0x00b8-0x00b9]
pnp 00:02: [io 0x00bc-0x00bd]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0072-0x0077]
pnp 00:02: [io 0x0400-0x047f]
pnp 00:02: [io 0x0500-0x057f]
pnp 00:02: [io 0x0800-0x080f]
pnp 00:02: [io 0x15e0-0x15ef]
pnp 00:02: [io 0x1600-0x167f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0x00000000-0x00000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x167f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:0a: [mem 0xfed40000-0xfed44fff]
pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff]
pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
debug: unmapping init [mem 0xdfe5d000-0xdffeffff]
audit: initializing netlink socket (disabled)
type=2000 audit(1357499049.745:1): initialized
bounce pool size: 64 pages
msgmni has been set to 1554
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
ata6: DUMMY
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Checking hibernation image partition /dev/sdb2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: HITACHI HTS727550A9E364, JF3ZD0H0, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72755 JF3Z PQ: 0 ANSI: 5
usb 1-1: new high-speed USB device number 2 using ehci_hcd
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/33
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT50N LT20 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=1bcf, idProduct=0c31
usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1.2: Product: USB to Serial-ATA bridge
usb 1-1.2: Manufacturer: Sunplus Innovation Technology.
usb 1-1.2: SerialNumber: FFFFFBA0FF000000000008037A06FA
scsi6 : usb-storage 1-1.2:1.0
usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 7CE9D3DEABD5
tsc: Refined TSC clocksource calibration: 2591.582 MHz
Switching to clocksource tsc
usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2013-01-06 19:04:12 UTC (1357499052)
debug: unmapping init [mem 0xc1529000-0xc1597fff]
Write protecting the kernel text: 3848k
Write protecting the kernel read-only data: 1136k
NX-protecting the kernel data: 2296k
usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Integrated Smart Card Reader
usb 2-1.5: Manufacturer: Lenovo
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 6:0:0:0: Direct-Access TOSHIBA MK7559GSXP PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.20)
PM: Starting manual resume from disk
PM: Hibernation image partition 8:18 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
udevd[2853]: starting version 171
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
wmi: Mapper loaded
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
ACPI: AC Adapter [AC] (off-line)
Non-volatile memory driver v1.3
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (40 C)
ACPI: Requesting acpi_cpufreq
ACPI: Battery Slot [BAT0] (battery present)
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
Linux agpgart interface v0.103
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = f84a0000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 41 for MSI/MSI-X
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 83ET73WW (1.43 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T420, model 4180F65
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c4:8f:76
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwldvm: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
fbcon: inteldrmfb (fb0) is primary device
ACPI: Invalid Power Resource to register!
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:01: registered as cooling_device4
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
hda_codec: CX20590: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
hda-codec: No codec parser is available
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
EXT4-fs (sdb3): re-mounted. Opts: (null)
Adding 9767516k swap on /dev/sdb2. Priority:-1 extents:1 across:9767516k
microcode: Microcode Update Driver: v2.00 removed.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
CPU2: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
CPU1: Package power limit notification (total events = 1)
CPU0: Package power limit normal
CPU1: Package power limit normal
CPU2: Package power limit normal
CPU3: Package power limit normal
Bridge firewalling registered
device tap0 entered promiscuous mode
device tap1 entered promiscuous mode
device tap2 entered promiscuous mode
device tap3 entered promiscuous mode
device br0 entered promiscuous mode
PPP generic driver version 2.4.2
NET: Registered protocol family 24
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
NET: Registered protocol family 17
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
EXT4-fs (sdb3): re-mounted. Opts: commit=600
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
i915 0000:00:02.0: power state changed by ACPI to D3hot
PM: suspend of devices complete after 706.788 msecs
PM: late suspend of devices complete after 0.185 msecs
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
PM: noirq suspend of devices complete after 33.766 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
Disabled fast string operations
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Initializing CPU#2
Disabled fast string operations
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Initializing CPU#3
Disabled fast string operations
CPU3 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 100.196 msecs
PM: early resume of devices complete after 0.122 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
usb 1-1.4: reset full-speed USB device number 4 using ehci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/33
usb 2-1.5: reset full-speed USB device number 3 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Extended CMOS year: 2000
PM: resume of devices complete after 2224.546 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
hda-intel: Unstable LPIB (65464 >= 8192); disabling LPIB delay counting
CPU3: Package power limit notification (total events = 59)
CPU0: Package power limit notification (total events = 59)
CPU2: Package power limit notification (total events = 59)
CPU1: Package power limit notification (total events = 59)
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU2: Package power limit notification (total events = 184)
CPU1: Package power limit notification (total events = 184)
CPU3: Package power limit notification (total events = 184)
CPU0: Package power limit notification (total events = 184)
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
thinkpad_acpi: unknown possible thermal alarm or keyboard event received
thinkpad_acpi: unhandled HKEY event 0x6040
thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
thinkpad_acpi: EC reports that Thermal Table has changed
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
ata1: EH complete
EXT4-fs (sdb3): re-mounted. Opts: commit=0
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.2: Product: USB2.0 Hub
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
usb 2-1.2.1: new low-speed USB device number 5 using ehci_hcd
usb 2-1.2.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.1: Product: USB Laser Mouse
usb 2-1.2.1: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input14
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.2.1/input0
usb 2-1.2.2: new full-speed USB device number 6 using ehci_hcd
usb 2-1.2.2: New USB device found, idVendor=043d, idProduct=0078
usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.2: Product: Lexmark Z600 Series
usb 2-1.2.2: Manufacturer: Lexmark
usb 2-1.2.2: SerialNumber: 18K670127065550
usb 2-1.2.3: new low-speed USB device number 7 using ehci_hcd
usb 2-1.2.3: New USB device found, idVendor=046a, idProduct=0023
usb 2-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input15
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.1/input/input16
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.3/input1
usb 2-1.2.4: new high-speed USB device number 8 using ehci_hcd
usb 2-1.2.4: New USB device found, idVendor=0ccd, idProduct=00ab
usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.4: Product: Cinergy T XXS
usb 2-1.2.4: Manufacturer: TerraTec GmbH
usb 2-1.2.4: SerialNumber: 0000000001
usblp 2-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
usbcore: registered new interface driver usblp
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 2-1.2.4: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/rc/rc0/input17
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.1 (root@n22) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #3 SMP Sun Jan 6 19:57:09 CET 2013
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: LENOVO 4180F65/4180F65, BIOS 83ET73WW (1.43 ) 11/30/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21e600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FE0000000 write-back
8 base 21F000000 mask FFF000000 uncachable
9 base 21E800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01a3f000-0x01bfffff]
RAMDISK: [mem 0x1fe5d000-0x1ffeffff]
ACPI: RSDP 000f00e0 00024 (v02 LENOVO)
ACPI: XSDT daffe120 000A4 (v01 LENOVO TP-83 00001430 PTEC 00000002)
ACPI: FACP dafe8000 000F4 (v04 LENOVO TP-83 00001430 PTL 00000002)
ACPI: DSDT dafeb000 0E7BC (v01 LENOVO TP-83 00001430 INTL 20061109)
ACPI: FACS daf2d000 00040
ACPI: SLIC daffd000 00176 (v01 LENOVO TP-83 00001430 PTEC 00000001)
ACPI: SSDT daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET dafe7000 00038 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: APIC dafe6000 00098 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: MCFG dafe5000 0003C (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: ECDT dafe4000 00052 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: ASF! dafea000 000A5 (v32 LENOVO TP-83 00001430 PTL 00000002)
ACPI: TCPA dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI dafe0000 0003E (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: UEFI dafdf000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI dafde000 00292 (v01 LENOVO TP-83 00001430 PTL 00000002)
ACPI: Local APIC address 0xfee00000
7786MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x1e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xda99efff]
node 0: [mem 0xdafff000-0xdaffffff]
node 0: [mem 0x00000000-0x1e5fffff]
On node 0 totalpages: 2067245
free_area_init_node: node 0, pgdat c1522c40, node_mem_map f2739280
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3941 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 221552 pages, LIFO batch:31
HighMem zone: 19466 pages used for memmap
HighMem zone: 1820056 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f26bf000 s30720 r0 d22528 u53248
pcpu-alloc: s30720 r0 d22528 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045549
Kernel command line: real_root=/dev/sdb3 rootfstype=ext4 resume=/dev/sdb2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 17772416 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0021e600)
Memory: 8153912k/8886272k available (3846k kernel code, 115068k reserved, 1437k data, 444k init, 7358088k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1529000 - 0xc1598000 ( 444 kB)
.data : 0xc13c1ae2 - 0xc1528f40 (1437 kB)
.text : 0xc1000000 - 0xc13c1ae2 (3846 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f100a000 soft=f100c000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2591.326 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5182.65 BogoMIPS (lpj=2591326)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
debug: unmapping init [mem 0xc1598000-0xc159cfff]
ACPI: Core revision 20120913
ftrace: allocating 15634 entries in 31 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f10ca000 soft=f10cc000
Initializing CPU#1
Disabled fast string operations
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f10fe000 soft=f1100000
Initializing CPU#2
Disabled fast string operations
#2
CPU 3 irqstacks, hard=f1116000 soft=f1118000
Initializing CPU#3
Disabled fast string operations
#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (20730.60 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x50b0-0x50b7]
pci 0000:00:16.3: reg 14: [mem 0xf252c000-0xf252cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff]
pci 0000:00:19.0: reg 18: [io 0x5080-0x509f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af]
pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf]
pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7]
pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb]
pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xdf9fffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed4c000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-fe]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0024-0x0025]
pnp 00:02: [io 0x0028-0x0029]
pnp 00:02: [io 0x002c-0x002d]
pnp 00:02: [io 0x0030-0x0031]
pnp 00:02: [io 0x0034-0x0035]
pnp 00:02: [io 0x0038-0x0039]
pnp 00:02: [io 0x003c-0x003d]
pnp 00:02: [io 0x00a4-0x00a5]
pnp 00:02: [io 0x00a8-0x00a9]
pnp 00:02: [io 0x00ac-0x00ad]
pnp 00:02: [io 0x00b0-0x00b5]
pnp 00:02: [io 0x00b8-0x00b9]
pnp 00:02: [io 0x00bc-0x00bd]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0072-0x0077]
pnp 00:02: [io 0x0400-0x047f]
pnp 00:02: [io 0x0500-0x057f]
pnp 00:02: [io 0x0800-0x080f]
pnp 00:02: [io 0x15e0-0x15ef]
pnp 00:02: [io 0x1600-0x167f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0x00000000-0x00000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x167f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:0a: [mem 0xfed40000-0xfed44fff]
pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff]
pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
debug: unmapping init [mem 0xdfe5d000-0xdffeffff]
audit: initializing netlink socket (disabled)
type=2000 audit(1357506363.375:1): initialized
bounce pool size: 64 pages
msgmni has been set to 1554
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
ata6: DUMMY
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Checking hibernation image partition /dev/sdb2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: HITACHI HTS727550A9E364, JF3ZD0H0, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72755 JF3Z PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/33
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT50N LT20 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
ACPI: Invalid Power Resource to register!<6>usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=1bcf, idProduct=0c31
usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1.2: Product: USB to Serial-ATA bridge
usb 1-1.2: Manufacturer: Sunplus Innovation Technology.
usb 1-1.2: SerialNumber: FFFFFBA0FF000000000008037A06FA
scsi6 : usb-storage 1-1.2:1.0
usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 7CE9D3DEABD5
tsc: Refined TSC clocksource calibration: 2591.583 MHz
Switching to clocksource tsc
usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2013-01-06 21:06:05 UTC (1357506365)
debug: unmapping init [mem 0xc1529000-0xc1597fff]
Write protecting the kernel text: 3848k
Write protecting the kernel read-only data: 1136k
NX-protecting the kernel data: 2296k
usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.2: Product: USB2.0 Hub
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Integrated Smart Card Reader
usb 2-1.5: Manufacturer: Lenovo
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.2.1: new low-speed USB device number 5 using ehci_hcd
usb 2-1.2.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.1: Product: USB Laser Mouse
usb 2-1.2.1: Manufacturer: Logitech
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input1
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.2.1/input0
usb 2-1.2.2: new full-speed USB device number 6 using ehci_hcd
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.20)
usb 2-1.2.2: New USB device found, idVendor=043d, idProduct=0078
usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.2: Product: Lexmark Z600 Series
usb 2-1.2.2: Manufacturer: Lexmark
usb 2-1.2.2: SerialNumber: 18K670127065550
scsi 6:0:0:0: Direct-Access TOSHIBA MK7559GSXP PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-1.2.3: new low-speed USB device number 7 using ehci_hcd
usb 2-1.2.3: New USB device found, idVendor=046a, idProduct=0023
usb 2-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input2
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.1/input/input3
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.3/input1
usb 2-1.2.4: new high-speed USB device number 8 using ehci_hcd
usb 2-1.2.4: New USB device found, idVendor=0ccd, idProduct=00ab
usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2.4: Product: Cinergy T XXS
usb 2-1.2.4: Manufacturer: TerraTec GmbH
usb 2-1.2.4: SerialNumber: 0000000001
sdb: sdb1 sdb2 sdb3 sdb4
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:18 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
udevd[2871]: starting version 171
Non-volatile memory driver v1.3
ACPI: AC Adapter [AC] (on-line)
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
wmi: Mapper loaded
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (40 C)
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ACPI: Battery Slot [BAT0] (battery present)
Linux video capture interface: v2.00
usblp 2-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
usbcore: registered new interface driver usblp
tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 83ET73WW (1.43 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T420, model 4180F65
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
cfg80211: Calling CRDA to update world regulatory domain
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
Linux agpgart interface v0.103
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = f84c0000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
usb 2-1.2.4: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
hda_codec: CX20590: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
hda-codec: No codec parser is available
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
DiB0070: successfully identified
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c4:8f:76
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[drm] Initialized drm 1.1.0 20060810
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/rc/rc0/input15
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
dib0700: rc submit urb failed
usbcore: registered new interface driver dvb_usb_dib0700
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
fbcon: inteldrmfb (fb0) is primary device
iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwldvm: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Console: switching to colour frame buffer device 200x56
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:01: registered as cooling_device4
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sdb3): re-mounted. Opts: (null)
Adding 9767516k swap on /dev/sdb2. Priority:-1 extents:1 across:9767516k
microcode: Microcode Update Driver: v2.00 removed.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
Bridge firewalling registered
device tap0 entered promiscuous mode
device tap1 entered promiscuous mode
device tap2 entered promiscuous mode
device tap3 entered promiscuous mode
device br0 entered promiscuous mode
PPP generic driver version 2.4.2
NET: Registered protocol family 24
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
NET: Registered protocol family 17
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/100
ata1: EH complete
EXT4-fs (sdb3): re-mounted. Opts: commit=0
