Re: Slow writes to SAS drives on LSI mpt2sas HBA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ewan

On Dec 3, 2012, at 5:06 PM, Ewan Milne <emilne@xxxxxxxxxx> wrote:

>> 
> 
> It sounds like your drive write cache is disabled, 7200RPM is 120
> revolutions/sec, and you are getting 7747584 / 1024 / 63.59 = ~119 IO/s
> I believe the write cache is enabled by default on SATA drives, which
> would explain the difference.

You were exactly right.  Thank you!

A quick "sdparm -S -set=WCE <dev>" and I was back to where I expected.

Thanks again,
-Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux