[PATCH V4 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds Platform glue driver for ufshcd.

Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>
Reviewed-by: Namjae Jeon <linkinjeon@xxxxxxxxx>
Signed-off-by: Vinayak Holikatti <vinholikatti@xxxxxxxxx>
Signed-off-by: Santosh Yaraganavi <santoshsy@xxxxxxxxx>
---
 drivers/scsi/ufs/Kconfig         |   11 ++
 drivers/scsi/ufs/Makefile        |    1 +
 drivers/scsi/ufs/ufshcd-pltfrm.c |  205 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 217 insertions(+), 0 deletions(-)
 create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index d77ae97..96e1721 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -57,3 +57,14 @@ config SCSI_UFSHCD_PCI
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
+
+config SCSI_UFSHCD_PLATFORM
+	tristate "Platform based UFS Controller support"
+	depends on SCSI_UFSHCD
+	---help---
+	This selects the UFS host controller support. If you have a
+	   platform with UFS controller, say Y or M here.
+
+	   If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9eda0df..1e5bd48 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,3 +1,4 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
+obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
new file mode 100644
index 0000000..73ac7c7
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -0,0 +1,205 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.c
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@xxxxxxxxxxx>
+ *	Vinayak Holikatti <h.vinayak@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#include "ufshcd.h"
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pltfrm_suspend - suspend power management function
+ * @pdev: pointer to Platform device handle
+ * @mesg: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pltfrm_suspend(struct platform_device *pdev,
+				 pm_message_t mesg)
+{
+	/*
+	 * TODO:
+	 * 1. Call ufshcd_suspend
+	 * 2. Do bus specific power management
+	 */
+
+	return -ENOSYS;
+}
+
+/**
+ * ufshcd_pltfrm_resume - resume power management function
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pltfrm_resume(struct platform_device *pdev)
+{
+	/*
+	 * TODO:
+	 * 1. Call ufshcd_resume.
+	 * 2. Do bus specific wake up
+	 */
+
+	return -ENOSYS;
+}
+#endif
+
+/**
+ * ufshcd_pltfrm_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_pltfrm_probe(struct platform_device *pdev)
+{
+	struct ufs_hba *hba;
+	void __iomem *mmio_base;
+	struct resource *mem_res;
+	struct resource *irq_res;
+	resource_size_t mem_size;
+	int err;
+	struct device *dev = &pdev->dev;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev,
+			"%s: Memory resource not available\n", __FILE__);
+		err = -ENODEV;
+		goto out_error;
+	}
+
+	mem_size = resource_size(mem_res);
+	if (!request_mem_region(mem_res->start, mem_size, "ufshcd")) {
+		dev_err(&pdev->dev,
+			"ufshcd: Cannot reserve the memory resource\n");
+		err = -EBUSY;
+		goto out_error;
+	}
+
+	mmio_base = ioremap_nocache(mem_res->start, mem_size);
+	if (!mmio_base) {
+		dev_err(&pdev->dev, "memory map failed\n");
+		err = -ENOMEM;
+		goto out_release_regions;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		dev_err(&pdev->dev, "ufshcd: IRQ resource not available\n");
+		err = -ENODEV;
+		goto out_iounmap;
+	}
+
+	err = dma_set_coherent_mask(dev, dev->coherent_dma_mask);
+	if (err) {
+		dev_err(&pdev->dev, "set dma mask failed\n");
+		goto out_iounmap;
+	}
+
+	err = ufshcd_init(&pdev->dev, &hba, mmio_base, irq_res->start);
+	if (err) {
+		dev_err(&pdev->dev, "%s: Intialization failed\n",
+			__FILE__);
+		goto out_iounmap;
+	}
+
+	platform_set_drvdata(pdev, hba);
+
+	return 0;
+
+out_iounmap:
+	iounmap(mmio_base);
+out_release_regions:
+	release_mem_region(mem_res->start, mem_size);
+out_error:
+	return err;
+}
+
+/**
+ * ufshcd_pltfrm_remove - remove platform driver routine
+ * @pdev: pointer to platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devexit ufshcd_pltfrm_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res;
+	struct resource *irq_res;
+	resource_size_t mem_size;
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (!irq_res)
+		dev_err(&pdev->dev, "ufshcd: IRQ resource not available\n");
+	else
+		free_irq(irq_res->start, hba);
+
+	ufshcd_remove(hba);
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res)
+		dev_err(&pdev->dev, "ufshcd: Memory resource not available\n");
+	else {
+		mem_size = resource_size(mem_res);
+		release_mem_region(mem_res->start, mem_size);
+	}
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static const struct of_device_id ufs_of_match[] = {
+	{ .compatible = "jedec,ufs-1.1"},
+};
+
+static struct platform_driver ufshcd_pltfrm_driver = {
+	.probe	= ufshcd_pltfrm_probe,
+	.remove	= __devexit_p(ufshcd_pltfrm_remove),
+#ifdef CONFIG_PM
+	.suspend = ufshcd_pltfrm_suspend,
+	.resume = ufshcd_pltfrm_resume,
+#endif
+	.driver	= {
+		.name	= "ufshcd",
+		.owner	= THIS_MODULE,
+		.of_match_table = ufs_of_match,
+	},
+};
+
+module_platform_driver(ufshcd_pltfrm_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@xxxxxxxxxxx>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Platform based UFS host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux