This patch contains MPI API headers
This patch is part 2 of MPI API headers.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@xxxxxxx>
---
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
new file mode 100644
index 0000000..7e24c55
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -0,0 +1,1707 @@
+/*
+ * Copyright (c) 2000-2011 LSI Corporation.
+ *
+ *
+ * Name: mpi2_cnfg.h
+ * Title: MPI Configuration messages and pages
+ * Creation Date: November 10, 2006
+ *
+ * mpi2_cnfg.h Version: 02.00.22
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
+ * Added Manufacturing Page 11.
+ * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ * define.
+ * 06-26-07 02.00.02 Adding generic structure for product-specific
+ * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ * Rework of BIOS Page 2 configuration page.
+ * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ * forms.
+ * Added configuration pages IOC Page 8 and Driver
+ * Persistent Mapping Page 0.
+ * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
+ * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ * RAID Physical Disk Pages 0 and 1, RAID Configuration
+ * Page 0).
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 10-31-07 02.00.04 Added missing SEPDevHandle field to
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
+ * NVDATA.
+ * Modified IOC Page 7 to use masks and added field for
+ * SASBroadcastPrimitiveMasks.
+ * Added MPI2_CONFIG_PAGE_BIOS_4.
+ * Added MPI2_CONFIG_PAGE_LOG_0.
+ * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
+ * Added SAS Device IDs.
+ * Updated Integrated RAID configuration pages including
+ * Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ * Page 0.
+ * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ * Added missing MaxNumRoutedSasAddresses field to
+ * MPI2_CONFIG_PAGE_EXPANDER_0.
+ * Added SAS Port Page 0.
+ * Modified structure layout for
+ * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ * to 0x000000FF.
+ * Added two new values for the Physical Disk Coercion Size
+ * bits in the Flags field of Manufacturing Page 4.
+ * Added product-specific Manufacturing pages 16 to 31.
+ * Modified Flags bits for controlling write cache on SATA
+ * drives in IO Unit Page 1.
+ * Added new bit to AdditionalControlFlags of SAS IO Unit
+ * Page 1 to control Invalid Topology Correction.
+ * Added additional defines for RAID Volume Page 0
+ * VolumeStatusFlags field.
+ * Modified meaning of RAID Volume Page 0 VolumeSettings
+ * define for auto-configure of hot-swap drives.
+ * Added SupportedPhysDisks field to RAID Volume Page 1 and
+ * added related defines.
+ * Added PhysDiskAttributes field (and related defines) to
+ * RAID Physical Disk Page 0.
+ * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ * Added three new DiscoveryStatus bits for SAS IO Unit
+ * Page 0 and SAS Expander Page 0.
+ * Removed multiplexing information from SAS IO Unit pages.
+ * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ * Removed Zone Address Resolved bit from PhyInfo and from
+ * Expander Page 0 Flags field.
+ * Added two new AccessStatus values to SAS Device Page 0
+ * for indicating routing problems. Added 3 reserved words
+ * to this page.
+ * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
+ * Inserted missing reserved field into structure for IOC
+ * Page 6.
+ * Added more pending task bits to RAID Volume Page 0
+ * VolumeStatusFlags defines.
+ * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ * and SAS Expander Page 0 to flag a downstream initiator
+ * when in simplified routing mode.
+ * Removed SATA Init Failure defines for DiscoveryStatus
+ * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ * Added PortGroups, DmaGroup, and ControlGroup fields to
+ * SAS Device Page 0.
+ * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
+ * Unit Page 6.
+ * Added expander reduced functionality data to SAS
+ * Expander Page 0.
+ * Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09 02.00.12 Added IO Unit Page 7.
+ * Added new device ids.
+ * Added SAS IO Unit Page 5.
+ * Added partial and slumber power management capable flags
+ * to SAS Device Page 0 Flags field.
+ * Added PhyInfo defines for power condition.
+ * Added Ethernet configuration pages.
+ * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ * Added SAS PHY Page 4 structure and defines.
+ * 02-10-10 02.00.14 Modified the comments for the configuration page
+ * structures that contain an array of data. The host
+ * should use the "count" field in the page data (e.g. the
+ * NumPhys field) to determine the number of valid elements
+ * in the array.
+ * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added PowerManagementCapabilities to IO Unit Page 7.
+ * Added PortWidthModGroup field to
+ * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
+ * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
+ * define.
+ * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
+ * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
+ * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
+ * defines.
+ * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
+ * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
+ * the Pinout field.
+ * Added BoardTemperature and BoardTemperatureUnits fields
+ * to MPI2_CONFIG_PAGE_IO_UNIT_7.
+ * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
+ * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ * Added IO Unit Page 8, IO Unit Page 9,
+ * and IO Unit Page 10.
+ * Added SASNotifyPrimitiveMasks field to
+ * MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
+ * 05-25-11 02.00.20 Cleaned up a few comments.
+ * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
+ * for PCIe link as obsolete.
+ * Added SpinupFlags field containing a Disable Spin-up bit
+ * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
+ * Unit Page 4.
+ * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
+ * Added UEFIVersion field to BIOS Page 1 and defined new
+ * BiosOptions bits.
+ * Incorporating additions for MPI v2.5.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_CNFG_H
+#define MPI2_CNFG_H
+
+/*****************************************************************************
+* Configuration Page Header and defines
+*****************************************************************************/
+
+/*Config Page Header */
+typedef struct _MPI2_CONFIG_PAGE_HEADER {
+ U8 PageVersion; /*0x00 */
+ U8 PageLength; /*0x01 */
+ U8 PageNumber; /*0x02 */
+ U8 PageType; /*0x03 */
+} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
+ Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
+
+typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
+ MPI2_CONFIG_PAGE_HEADER Struct;
+ U8 Bytes[4];
+ U16 Word16[2];
+ U32 Word32;
+} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
+ Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
+
+/*Extended Config Page Header */
+typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
+ U8 PageVersion; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 PageNumber; /*0x02 */
+ U8 PageType; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 Reserved2; /*0x07 */
+} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+ *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+ Mpi2ConfigExtendedPageHeader_t,
+ *pMpi2ConfigExtendedPageHeader_t;
+
+typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
+ MPI2_CONFIG_PAGE_HEADER Struct;
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
+ U8 Bytes[8];
+ U16 Word16[4];
+ U32 Word32[2];
+} MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+ *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+ Mpi2ConfigPageExtendedHeaderUnion,
+ *pMpi2ConfigPageExtendedHeaderUnion;
+
+
+/*PageType field values */
+#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
+#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
+#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
+#define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
+
+#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
+#define MPI2_CONFIG_PAGETYPE_IOC (0x01)
+#define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
+#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
+#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
+#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
+#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
+#define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
+
+#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
+
+
+/*ExtPageType field values */
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
+#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
+#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
+#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
+#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
+
+
+/*****************************************************************************
+* PageAddress defines
+*****************************************************************************/
+
+/*RAID Volume PageAddress format */
+#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
+
+
+/*RAID Physical Disk PageAddress format */
+#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
+#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
+#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
+
+#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
+#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
+
+
+/*SAS Expander PageAddress format */
+#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
+
+#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
+
+
+/*SAS Device PageAddress format */
+#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+
+#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
+
+
+/*SAS PHY PageAddress format */
+#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
+
+#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
+#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
+
+
+/*SAS Port PageAddress format */
+#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
+#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
+
+#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
+
+
+/*SAS Enclosure PageAddress format */
+#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
+
+
+/*RAID Configuration PageAddress format */
+#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
+#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
+#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
+
+#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
+
+
+/*Driver Persistent Mapping PageAddress format */
+#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
+
+#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
+#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
+#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
+
+
+/*Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+
+
+
+/****************************************************************************
+* Configuration messages
+****************************************************************************/
+
+/*Configuration Request Message */
+typedef struct _MPI2_CONFIG_REQUEST {
+ U8 Action; /*0x00 */
+ U8 SGLFlags; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U8 Reserved2; /*0x0C */
+ U8 ProxyVF_ID; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ U32 Reserved3; /*0x10 */
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
+ U32 PageAddress; /*0x18 */
+ MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */
+} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
+ Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
+
+/*values for the Action field */
+#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
+#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
+#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
+#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
+#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
+#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+
+/*Config Reply Message */
+typedef struct _MPI2_CONFIG_REPLY {
+ U8 Action; /*0x00 */
+ U8 SGLFlags; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U16 Reserved2; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
+} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
+ Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
+
+
+
+/*****************************************************************************
+*
+* C o n f i g u r a t i o n P a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Manufacturing Config pages
+****************************************************************************/
+
+#define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
+
+/*MPI v2.0 SAS products */
+#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
+#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
+#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
+#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
+#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
+#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
+#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
+
+#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
+
+#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
+#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
+#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
+#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
+#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
+#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
+
+/*MPI v2.5 SAS products */
+#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
+#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097)
+#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090)
+#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091)
+#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
+#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
+
+
+
+
+/*Manufacturing Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 ChipName[16]; /*0x04 */
+ U8 ChipRevision[8]; /*0x14 */
+ U8 BoardName[16]; /*0x1C */
+ U8 BoardAssembly[16]; /*0x2C */
+ U8 BoardTracerNumber[16]; /*0x3C */
+} MPI2_CONFIG_PAGE_MAN_0,
+ *PTR_MPI2_CONFIG_PAGE_MAN_0,
+ Mpi2ManufacturingPage0_t,
+ *pMpi2ManufacturingPage0_t;
+
+#define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 VPD[256]; /*0x04 */
+} MPI2_CONFIG_PAGE_MAN_1,
+ *PTR_MPI2_CONFIG_PAGE_MAN_1,
+ Mpi2ManufacturingPage1_t,
+ *pMpi2ManufacturingPage1_t;
+
+#define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
+
+
+typedef struct _MPI2_CHIP_REVISION_ID {
+ U16 DeviceID; /*0x00 */
+ U8 PCIRevisionID; /*0x02 */
+ U8 Reserved; /*0x03 */
+} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
+ Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
+
+
+/*Manufacturing Page 2 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
+#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
+ U32
+ HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_2,
+ *PTR_MPI2_CONFIG_PAGE_MAN_2,
+ Mpi2ManufacturingPage2_t,
+ *pMpi2ManufacturingPage2_t;
+
+#define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
+#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
+ U32
+ Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_3,
+ *PTR_MPI2_CONFIG_PAGE_MAN_3,
+ Mpi2ManufacturingPage3_t,
+ *pMpi2ManufacturingPage3_t;
+
+#define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 4 */
+
+typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
+ U8 PowerSaveFlags; /*0x00 */
+ U8 InternalOperationsSleepTime; /*0x01 */
+ U8 InternalOperationsRunTime; /*0x02 */
+ U8 HostIdleTime; /*0x03 */
+} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+ *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+ Mpi2ManPage4PwrSaveSettings_t,
+ *pMpi2ManPage4PwrSaveSettings_t;
+
+/*defines for the PowerSaveFlags field */
+#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
+#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
+#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
+#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Flags; /*0x08 */
+ U8 InquirySize; /*0x0C */
+ U8 Reserved2; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ U8 InquiryData[56]; /*0x10 */
+ U32 RAID0VolumeSettings; /*0x48 */
+ U32 RAID1EVolumeSettings; /*0x4C */
+ U32 RAID1VolumeSettings; /*0x50 */
+ U32 RAID10VolumeSettings; /*0x54 */
+ U32 Reserved4; /*0x58 */
+ U32 Reserved5; /*0x5C */
+ MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */
+ U8 MaxOCEDisks; /*0x64 */
+ U8 ResyncRate; /*0x65 */
+ U16 DataScrubDuration; /*0x66 */
+ U8 MaxHotSpares; /*0x68 */
+ U8 MaxPhysDisksPerVol; /*0x69 */
+ U8 MaxPhysDisks; /*0x6A */
+ U8 MaxVolumes; /*0x6B */
+} MPI2_CONFIG_PAGE_MAN_4,
+ *PTR_MPI2_CONFIG_PAGE_MAN_4,
+ Mpi2ManufacturingPage4_t,
+ *pMpi2ManufacturingPage4_t;
+
+#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
+
+/*Manufacturing Page 4 Flags field */
+#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
+#define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
+
+#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
+#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
+#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
+
+#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
+#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
+#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
+#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
+#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
+
+#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
+#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
+#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
+#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
+
+#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
+#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
+#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
+#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
+#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
+#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
+#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
+#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
+
+
+/*Manufacturing Page 5 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
+#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_MANUFACTURING5_ENTRY {
+ U64 WWID; /*0x00 */
+ U64 DeviceName; /*0x08 */
+} MPI2_MANUFACTURING5_ENTRY,
+ *PTR_MPI2_MANUFACTURING5_ENTRY,
+ Mpi2Manufacturing5Entry_t,
+ *pMpi2Manufacturing5Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ MPI2_MANUFACTURING5_ENTRY
+ Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_5,
+ *PTR_MPI2_CONFIG_PAGE_MAN_5,
+ Mpi2ManufacturingPage5_t,
+ *pMpi2ManufacturingPage5_t;
+
+#define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
+
+
+/*Manufacturing Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_6,
+ *PTR_MPI2_CONFIG_PAGE_MAN_6,
+ Mpi2ManufacturingPage6_t,
+ *pMpi2ManufacturingPage6_t;
+
+#define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 7 */
+
+typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
+ U32 Pinout; /*0x00 */
+ U8 Connector[16]; /*0x04 */
+ U8 Location; /*0x14 */
+ U8 ReceptacleID; /*0x15 */
+ U16 Slot; /*0x16 */
+ U32 Reserved2; /*0x18 */
+} MPI2_MANPAGE7_CONNECTOR_INFO,
+ *PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
+ Mpi2ManPage7ConnectorInfo_t,
+ *pMpi2ManPage7ConnectorInfo_t;
+
+/*defines for the Pinout field */
+#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
+#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
+
+#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
+#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
+#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
+#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
+#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
+#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
+#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
+#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
+#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
+
+/*defines for the Location field */
+#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
+#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
+#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
+#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
+#define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
+#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
+#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Flags; /*0x0C */
+ U8 EnclosureName[16]; /*0x10 */
+ U8 NumPhys; /*0x20 */
+ U8 Reserved3; /*0x21 */
+ U16 Reserved4; /*0x22 */
+ MPI2_MANPAGE7_CONNECTOR_INFO
+ ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
+} MPI2_CONFIG_PAGE_MAN_7,
+ *PTR_MPI2_CONFIG_PAGE_MAN_7,
+ Mpi2ManufacturingPage7_t,
+ *pMpi2ManufacturingPage7_t;
+
+#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
+
+/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
+
+
+/*
+ *Generic structure to use for product-specific manufacturing pages
+ *(currently Manufacturing Page 8 through Manufacturing Page 31).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_PS,
+ *PTR_MPI2_CONFIG_PAGE_MAN_PS,
+ Mpi2ManufacturingPagePS_t,
+ *pMpi2ManufacturingPagePS_t;
+
+#define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* IO Unit Config Pages
+****************************************************************************/
+
+/*IO Unit Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U64 UniqueValue; /*0x04 */
+ MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */
+ MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */
+} MPI2_CONFIG_PAGE_IO_UNIT_0,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
+ Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
+
+#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
+
+
+/*IO Unit Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Flags; /*0x04 */
+} MPI2_CONFIG_PAGE_IO_UNIT_1,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
+ Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
+
+#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
+
+/*IO Unit Page 1 Flags defines */
+#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
+#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
+#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
+#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
+#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
+#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
+#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
+#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
+#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
+#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
+#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
+#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
+
+
+/*IO Unit Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for GPIOCount at runtime.
+ */
+#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
+#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 GPIOCount; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U16
+ GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
+} MPI2_CONFIG_PAGE_IO_UNIT_3,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
+ Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
+
+#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
+
+/*defines for IO Unit Page 3 GPIOVal field */
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
+
+
+/*IO Unit Page 5 */
+
+/*
+ *Upper layer code (drivers, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U64
+ RaidAcceleratorBufferBaseAddress; /*0x04 */
+ U64
+ RaidAcceleratorBufferSize; /*0x0C */
+ U64
+ RaidAcceleratorControlBaseAddress; /*0x14 */
+ U8 RAControlSize; /*0x1C */
+ U8 NumDmaEngines; /*0x1D */
+ U8 RAMinControlSize; /*0x1E */
+ U8 RAMaxControlSize; /*0x1F */
+ U32 Reserved1; /*0x20 */
+ U32 Reserved2; /*0x24 */
+ U32 Reserved3; /*0x28 */
+ U32
+ DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+ Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
+
+/*defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
+
+
+/*IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 Flags; /*0x04 */
+ U8 RAHostControlSize; /*0x06 */
+ U8 Reserved0; /*0x07 */
+ U64
+ RaidAcceleratorHostControlBaseAddress; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+ U32 Reserved3; /*0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+ Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
+
+/*defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+
+
+/*IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 CurrentPowerMode; /*0x04 */
+ U8 PreviousPowerMode; /*0x05 */
+ U8 PCIeWidth; /*0x06 */
+ U8 PCIeSpeed; /*0x07 */
+ U32 ProcessorState; /*0x08 */
+ U32
+ PowerManagementCapabilities; /*0x0C */
+ U16 IOCTemperature; /*0x10 */
+ U8
+ IOCTemperatureUnits; /*0x12 */
+ U8 IOCSpeed; /*0x13 */
+ U16 BoardTemperature; /*0x14 */
+ U8
+ BoardTemperatureUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+ Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02)
+
+/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
+#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
+#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00)
+#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40)
+#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80)
+#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0)
+
+#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01)
+#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04)
+#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05)
+#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06)
+
+
+/*defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+
+/*defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+
+/*defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+
+/*defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001)
+
+/*obsolete names for the PowerManagementCapabilities bits (above) */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */
+
+
+/*defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
+
+/*defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
+
+/*defines for IO Unit Page 7 BoardTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
+
+
+/*IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+ U16 Flags; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U16
+ Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
+ U32 Reserved2; /*0x0C */
+ U32 Reserved3; /*0x10 */
+ U32 Reserved4; /*0x14 */
+} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
+ Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
+
+/*defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U8 NumSensors; /*0x0C */
+ U8 PollingInterval; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI2_IOUNIT8_SENSOR
+ Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+ Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
+
+
+/*IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+ U16 CurrentTemperature; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U8 Flags; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U16 Reserved3; /*0x06 */
+ U32 Reserved4; /*0x08 */
+ U32 Reserved5; /*0x0C */
+} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
+ Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
+
+/*defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U8 NumSensors; /*0x0C */
+ U8 Reserved4; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI2_IOUNIT9_SENSOR
+ Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+ Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
+
+
+/*IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+ U8 CreditPercent; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_IOUNIT10_FUNCTION,
+ *PTR_MPI2_IOUNIT10_FUNCTION,
+ Mpi2IOUnit10Function_t,
+ *pMpi2IOUnit10Function_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumFunctions; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ MPI2_IOUNIT10_FUNCTION
+ Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+ Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
+
+
+
+/****************************************************************************
+* IOC Config Pages
+****************************************************************************/
+
+/*IOC Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U16 VendorID; /*0x0C */
+ U16 DeviceID; /*0x0E */
+ U8 RevisionID; /*0x10 */
+ U8 Reserved3; /*0x11 */
+ U16 Reserved4; /*0x12 */
+ U32 ClassCode; /*0x14 */
+ U16 SubsystemVendorID; /*0x18 */
+ U16 SubsystemID; /*0x1A */
+} MPI2_CONFIG_PAGE_IOC_0,
+ *PTR_MPI2_CONFIG_PAGE_IOC_0,
+ Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
+
+#define MPI2_IOCPAGE0_PAGEVERSION (0x02)
+
+
+/*IOC Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Flags; /*0x04 */
+ U32 CoalescingTimeout; /*0x08 */
+ U8 CoalescingDepth; /*0x0C */
+ U8 PCISlotNum; /*0x0D */
+ U8 PCIBusNum; /*0x0E */
+ U8 PCIDomainSegment; /*0x0F */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_1,
+ *PTR_MPI2_CONFIG_PAGE_IOC_1,
+ Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
+
+#define MPI2_IOCPAGE1_PAGEVERSION (0x05)
+
+/*defines for IOC Page 1 Flags field */
+#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
+
+#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
+#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
+#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
+
+/*IOC Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32
+ CapabilitiesFlags; /*0x04 */
+ U8 MaxDrivesRAID0; /*0x08 */
+ U8 MaxDrivesRAID1; /*0x09 */
+ U8
+ MaxDrivesRAID1E; /*0x0A */
+ U8
+ MaxDrivesRAID10; /*0x0B */
+ U8 MinDrivesRAID0; /*0x0C */
+ U8 MinDrivesRAID1; /*0x0D */
+ U8
+ MinDrivesRAID1E; /*0x0E */
+ U8
+ MinDrivesRAID10; /*0x0F */
+ U32 Reserved1; /*0x10 */
+ U8
+ MaxGlobalHotSpares; /*0x14 */
+ U8 MaxPhysDisks; /*0x15 */
+ U8 MaxVolumes; /*0x16 */
+ U8 MaxConfigs; /*0x17 */
+ U8 MaxOCEDisks; /*0x18 */
+ U8 Reserved2; /*0x19 */
+ U16 Reserved3; /*0x1A */
+ U32
+ SupportedStripeSizeMapRAID0; /*0x1C */
+ U32
+ SupportedStripeSizeMapRAID1E; /*0x20 */
+ U32
+ SupportedStripeSizeMapRAID10; /*0x24 */
+ U32 Reserved4; /*0x28 */
+ U32 Reserved5; /*0x2C */
+ U16
+ DefaultMetadataSize; /*0x30 */
+ U16 Reserved6; /*0x32 */
+ U16
+ MaxBadBlockTableEntries; /*0x34 */
+ U16 Reserved7; /*0x36 */
+ U32
+ IRNvsramVersion; /*0x38 */
+} MPI2_CONFIG_PAGE_IOC_6,
+ *PTR_MPI2_CONFIG_PAGE_IOC_6,
+ Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
+
+#define MPI2_IOCPAGE6_PAGEVERSION (0x05)
+
+/*defines for IOC Page 6 CapabilitiesFlags */
+#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
+#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
+
+
+/*IOC Page 7 */
+
+#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32
+ EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
+ U16 SASBroadcastPrimitiveMasks; /*0x18 */
+ U16 SASNotifyPrimitiveMasks; /*0x1A */
+ U32 Reserved3; /*0x1C */
+} MPI2_CONFIG_PAGE_IOC_7,
+ *PTR_MPI2_CONFIG_PAGE_IOC_7,
+ Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
+
+#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
+
+
+/*IOC Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumDevsPerEnclosure; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U16 MaxPersistentEntries; /*0x08 */
+ U16 MaxNumPhysicalMappedIDs; /*0x0A */
+ U16 Flags; /*0x0C */
+ U16 Reserved3; /*0x0E */
+ U16 IRVolumeMappingFlags; /*0x10 */
+ U16 Reserved4; /*0x12 */
+ U32 Reserved5; /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_8,
+ *PTR_MPI2_CONFIG_PAGE_IOC_8,
+ Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
+
+#define MPI2_IOCPAGE8_PAGEVERSION (0x00)
+
+/*defines for IOC Page 8 Flags field */
+#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
+#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
+
+#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
+#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
+#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
+
+#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
+#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
+
+/*defines for IOC Page 8 IRVolumeMappingFlags */
+#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
+#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
+#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
+
+
+/****************************************************************************
+* BIOS Config Pages
+****************************************************************************/
+
+/*BIOS Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 BiosOptions; /*0x04 */
+ U32 IOCSettings; /*0x08 */
+ U32 Reserved1; /*0x0C */
+ U32 DeviceSettings; /*0x10 */
+ U16 NumberOfDevices; /*0x14 */
+ U16 UEFIVersion; /*0x16 */
+ U16 IOTimeoutBlockDevicesNonRM; /*0x18 */
+ U16 IOTimeoutSequential; /*0x1A */
+ U16 IOTimeoutOther; /*0x1C */
+ U16 IOTimeoutBlockDevicesRM; /*0x1E */
+} MPI2_CONFIG_PAGE_BIOS_1,
+ *PTR_MPI2_CONFIG_PAGE_BIOS_1,
+ Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
+
+#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
+
+/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
+#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
+#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
+
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
+
+/*values for BIOS Page 1 IOCSettings field */
+#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
+#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
+#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
+#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
+#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
+#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
+#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
+
+#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
+
+/*values for BIOS Page 1 DeviceSettings field */
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
+
+/*defines for BIOS Page 1 UEFIVersion field */
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
+
+
+
+/*BIOS Page 2 */
+
+typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
+ U32 Reserved1; /*0x00 */
+ U32 Reserved2; /*0x04 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+ *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+ Mpi2BootDeviceAdapterOrder_t,
+ *pMpi2BootDeviceAdapterOrder_t;
+
+typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
+ U64 SASAddress; /*0x00 */
+ U8 LUN[8]; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_BOOT_DEVICE_SAS_WWID,
+ *PTR_MPI2_BOOT_DEVICE_SAS_WWID,
+ Mpi2BootDeviceSasWwid_t,
+ *pMpi2BootDeviceSasWwid_t;
+
+typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
+ U64 EnclosureLogicalID; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ U16 SlotNumber; /*0x10 */
+ U16 Reserved3; /*0x12 */
+ U32 Reserved4; /*0x14 */
+} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+ *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+ Mpi2BootDeviceEnclosureSlot_t,
+ *pMpi2BootDeviceEnclosureSlot_t;
+
+typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
+ U64 DeviceName; /*0x00 */
+ U8 LUN[8]; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_BOOT_DEVICE_DEVICE_NAME,
+ *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
+ Mpi2BootDeviceDeviceName_t,
+ *pMpi2BootDeviceDeviceName_t;
+
+typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
+ MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
+ MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
+ MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
+ MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
+} MPI2_BIOSPAGE2_BOOT_DEVICE,
+ *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
+ Mpi2BiosPage2BootDevice_t,
+ *pMpi2BiosPage2BootDevice_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ U32 Reserved4; /*0x10 */
+ U32 Reserved5; /*0x14 */
+ U32 Reserved6; /*0x18 */
+ U8 ReqBootDeviceForm; /*0x1C */
+ U8 Reserved7; /*0x1D */
+ U16 Reserved8; /*0x1E */
+ MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */
+ U8 ReqAltBootDeviceForm; /*0x38 */
+ U8 Reserved9; /*0x39 */
+ U16 Reserved10; /*0x3A */
+ MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */
+ U8 CurrentBootDeviceForm; /*0x58 */
+ U8 Reserved11; /*0x59 */
+ U16 Reserved12; /*0x5A */
+ MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */
+} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
+ Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
+
+#define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
+
+/*values for BIOS Page 2 BootDeviceForm fields */
+#define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
+#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
+#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
+#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
+#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
+
+
+/*BIOS Page 3 */
+
+typedef struct _MPI2_ADAPTER_INFO {
+ U8 PciBusNumber; /*0x00 */
+ U8 PciDeviceAndFunctionNumber; /*0x01 */
+ U16 AdapterFlags; /*0x02 */
+} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
+ Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
+
+#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
+#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 GlobalFlags; /*0x04 */
+ U32 BiosVersion; /*0x08 */
+ MPI2_ADAPTER_INFO AdapterOrder[4]; /*0x0C */
+ U32 Reserved1; /*0x1C */
+} MPI2_CONFIG_PAGE_BIOS_3,
+ *PTR_MPI2_CONFIG_PAGE_BIOS_3,
+ Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
+
+#define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
+
+/*values for BIOS Page 3 GlobalFlags */
+#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
+#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
+#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
+
+#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
+#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
+
+
+/*BIOS Page 4 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
+#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_BIOS4_ENTRY {
+ U64 ReassignmentWWID; /*0x00 */
+ U64 ReassignmentDeviceName; /*0x08 */
+} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
+ Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ MPI2_BIOS4_ENTRY
+ Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
+} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
+ Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
+
+#define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
+
+
+/****************************************************************************
+* RAID Volume Config Pages
+****************************************************************************/
+
+/*RAID Volume Page 0 */
+
+typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
+ U8 RAIDSetNum; /*0x00 */
+ U8 PhysDiskMap; /*0x01 */
+ U8 PhysDiskNum; /*0x02 */
+ U8 Reserved; /*0x03 */
+} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
+ Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
+#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
+
+typedef struct _MPI2_RAIDVOL0_SETTINGS {
+ U16 Settings; /*0x00 */
+ U8 HotSparePool; /*0x01 */
+ U8 Reserved; /*0x02 */
+} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
+ Mpi2RaidVol0Settings_t,
+ *pMpi2RaidVol0Settings_t;
+
+/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
+#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
+#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
+#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
+#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
+#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
+#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
+#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
+#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
+
+/*RAID Volume Page 0 VolumeSettings defines */
+#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
+#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
+
+#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
+#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
+#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
+#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDisks at runtime.
+ */
+#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
+#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U8 VolumeState; /*0x06 */
+ U8 VolumeType; /*0x07 */
+ U32 VolumeStatusFlags; /*0x08 */
+ MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */
+ U64 MaxLBA; /*0x10 */
+ U32 StripeSize; /*0x18 */
+ U16 BlockSize; /*0x1C */
+ U16 Reserved1; /*0x1E */
+ U8 SupportedPhysDisks;/*0x20 */
+ U8 ResyncRate; /*0x21 */
+ U16 DataScrubDuration; /*0x22 */
+ U8 NumPhysDisks; /*0x24 */
+ U8 Reserved2; /*0x25 */
+ U8 Reserved3; /*0x26 */
+ U8 InactiveStatus; /*0x27 */
+ MPI2_RAIDVOL0_PHYS_DISK
+ PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
+} MPI2_CONFIG_PAGE_RAID_VOL_0,
+ *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
+ Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
+
+#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
+
+/*values for RAID VolumeState */
+#define MPI2_RAID_VOL_STATE_MISSING (0x00)
+#define MPI2_RAID_VOL_STATE_FAILED (0x01)
+#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
+#define MPI2_RAID_VOL_STATE_ONLINE (0x03)
+#define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
+#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
+
+/*values for RAID VolumeType */
+#define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
+#define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
+#define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
+#define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
+#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
+
+/*values for RAID Volume Page 0 VolumeStatusFlags field */
+#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
+#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
+#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
+#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
+
+/*values for RAID Volume Page 0 SupportedPhysDisks field */
+#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
+#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
+#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
+#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
+
+/*values for RAID Volume Page 0 InactiveStatus field */
+#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
+#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
+#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
+#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
+#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
+
+
+/*RAID Volume Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U16 Reserved0; /*0x06 */
+ U8 GUID[24]; /*0x08 */
+ U8 Name[16]; /*0x20 */
+ U64 WWID; /*0x30 */
+ U32 Reserved1; /*0x38 */
+ U32 Reserved2; /*0x3C */
+} MPI2_CONFIG_PAGE_RAID_VOL_1,
+ *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
+ Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
+
+#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
+
+
+/****************************************************************************
+* RAID Physical Disk Config Pages
+****************************************************************************/
+
+/*RAID Physical Disk Page 0 */
+
+typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
+ U16 Reserved1; /*0x00 */
+ U8 HotSparePool; /*0x02 */
+ U8 Reserved2; /*0x03 */
+} MPI2_RAIDPHYSDISK0_SETTINGS,
+ *PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
+ Mpi2RaidPhysDisk0Settings_t,
+ *pMpi2RaidPhysDisk0Settings_t;
+
+/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
+
+typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
+ U8 VendorID[8]; /*0x00 */
+ U8 ProductID[16]; /*0x08 */
+ U8 ProductRevLevel[4]; /*0x18 */
+ U8 SerialNum[32]; /*0x1C */
+} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+ *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+ Mpi2RaidPhysDisk0InquiryData_t,
+ *pMpi2RaidPhysDisk0InquiryData_t;
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 PhysDiskNum; /*0x07 */
+ MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */
+ U32 Reserved3; /*0x4C */
+ U8 PhysDiskState; /*0x50 */
+ U8 OfflineReason; /*0x51 */
+ U8 IncompatibleReason; /*0x52 */
+ U8 PhysDiskAttributes; /*0x53 */
+ U32 PhysDiskStatusFlags;/*0x54 */
+ U64 DeviceMaxLBA; /*0x58 */
+ U64 HostMaxLBA; /*0x60 */
+ U64 CoercedMaxLBA; /*0x68 */
+ U16 BlockSize; /*0x70 */
+ U16 Reserved5; /*0x72 */
+ U32 Reserved6; /*0x74 */
+} MPI2_CONFIG_PAGE_RD_PDISK_0,
+ *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
+ Mpi2RaidPhysDiskPage0_t,
+ *pMpi2RaidPhysDiskPage0_t;
+
+#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
