Re: Fail to probe qla2xxx fiber channel card while doing pci hotplug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,
	We will try to work out a patch for this issue, won't silently ignore it.
We also found another issue related to ARI. The steps to reproduce the bug is:
1) Boot with a ARI-capable device connected to ARI-capable port, so ARI will be enabled.
2) Hot-remove the ARI-capable device.
3) Hot-add another non-ARI-capable multifunction device into the same slot.
4) Now only the function 0 of the hot-added device could be enumerated.

	I think Yijing is going to work on the above two issues.
	Thanks!
	Gerry

On 09/20/2012 11:46 PM, Bjorn Helgaas wrote:
>>>> tried any.  Does "pci=pcie_bus_safe" make any difference?

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux