Re: [RESEND][PATCH][SCSI] mpt2sas: Fix for issue - Unable to boot from the SAS drive connected to HBA

[Rolf Eike Beer <eike-kernel@xxxxxxxxx>]

Am Dienstag 21 August 2012, 21:53:15 schrieb sreekanth.reddy@xxxxxxx:
> Fix for issue - Unable to boot from the SAS drive connected to HBA
> 
> This patch checks whether HBA is SAS2008 B0 controller.
> if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of
> MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts.
> 
> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxx>
> Cc: <stable@xxxxxxxxxx>
> ---
> 
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c
> b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6102ef2..fd2f4ad 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_base.c
> +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
> @@ -1207,6 +1207,15 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
>  {
>  	int base;
>  	u16 message_control;
> +	u8 revision;
> +
> +	/* Check whether controller SAS2008 B0 controller,
> +	   if it is a SAS2008 B0 controller use IO-APIC instead of MSIX */
> +	pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);

Nope. Just use ioc->pdev->revision here.

> +	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
> +	    revision == 0x01) {
> +		return -EINVAL;
> +	}
> 
> 
>  	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);

Eike

Attachment: signature.asc
Description: This is a digitally signed message part.