Hello! Do you remember? I get it again, is there something I could do? I attached a file that contains the "udevadm monitor" log. I am using a v3.5.0 linux kernel (containing some gentoo patches). Should I test it with a vanilla one? Here the versions of some packages (kernel, udev, systemd): sys-kernel/gentoo-sources-3.5.0 sys-fs/udev-186 sys-apps/systemd-44-r1 Here (again) the information about the two sticks I run in trouble after plug them in: # udevadm info --path=/block/sdb P: /devices/pci0000:00/0000:00:04.1/usb5/5-4/5-4:1.0/host22/target22:0:0/22:0:0:0/block/sdb N: sdb S: disk/by-id/usb-SanDisk_Cruzer_07745302FB131CFA-0:0 S: disk/by-path/pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: DEVLINKS=/dev/disk/by-id/usb-SanDisk_Cruzer_07745302FB131CFA-0:0 /dev/disk/by-path/pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: DEVNAME=/dev/sdb E: DEVPATH=/devices/pci0000:00/0000:00:04.1/usb5/5-4/5-4:1.0/host22/target22:0:0/22:0:0:0/block/sdb E: DEVTYPE=disk E: ID_BUS=usb E: ID_DRIVE_THUMB=1 E: ID_INSTANCE=0:0 E: ID_MODEL=Cruzer E: ID_MODEL_ENC=Cruzer\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20 E: ID_MODEL_ID=5406 E: ID_PART_TABLE_TYPE=dos E: ID_PATH=pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: ID_PATH_TAG=pci-0000_00_04_1-usb-0_4_1_0-scsi-0_0_0_0 E: ID_REVISION=8.02 E: ID_SERIAL=SanDisk_Cruzer_07745302FB131CFA-0:0 E: ID_SERIAL_SHORT=07745302FB131CFA E: ID_TYPE=disk E: ID_USB_DRIVER=usb-storage E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=SanDisk E: ID_VENDOR_ENC=SanDisk\x20 E: ID_VENDOR_ID=0781 E: LVM_SBIN_PATH=/sbin E: MAJOR=8 E: MINOR=16 E: SUBSYSTEM=block E: TAGS=:systemd: E: UDISKS_PARTITION_TABLE=1 E: UDISKS_PARTITION_TABLE_COUNT=1 E: UDISKS_PARTITION_TABLE_SCHEME=mbr E: UDISKS_PRESENTATION_NOPOLICY=0 E: USEC_INITIALIZED=79287950141 # udevadm info --path=/block/sdb P: /devices/pci0000:00/0000:00:04.1/usb5/5-4/5-4:1.0/host23/target23:0:0/23:0:0:0/block/sdb N: sdb S: disk/by-id/usb-SanDisk_Cruzer_22427202FB10CD97-0:0 S: disk/by-path/pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: DEVLINKS=/dev/disk/by-id/usb-SanDisk_Cruzer_22427202FB10CD97-0:0 /dev/disk/by-path/pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: DEVNAME=/dev/sdb E: DEVPATH=/devices/pci0000:00/0000:00:04.1/usb5/5-4/5-4:1.0/host23/target23:0:0/23:0:0:0/block/sdb E: DEVTYPE=disk E: ID_BUS=usb E: ID_DRIVE_THUMB=1 E: ID_INSTANCE=0:0 E: ID_MODEL=Cruzer E: ID_MODEL_ENC=Cruzer\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20 E: ID_MODEL_ID=5406 E: ID_PART_TABLE_TYPE=dos E: ID_PATH=pci-0000:00:04.1-usb-0:4:1.0-scsi-0:0:0:0 E: ID_PATH_TAG=pci-0000_00_04_1-usb-0_4_1_0-scsi-0_0_0_0 E: ID_REVISION=8.02 E: ID_SERIAL=SanDisk_Cruzer_22427202FB10CD97-0:0 E: ID_SERIAL_SHORT=22427202FB10CD97 E: ID_TYPE=disk E: ID_USB_DRIVER=usb-storage E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=SanDisk E: ID_VENDOR_ENC=SanDisk\x20 E: ID_VENDOR_ID=0781 E: LVM_SBIN_PATH=/sbin E: MAJOR=8 E: MINOR=16 E: SUBSYSTEM=block E: TAGS=:systemd: E: UDISKS_PARTITION_TABLE=1 E: UDISKS_PARTITION_TABLE_COUNT=1 E: UDISKS_PARTITION_TABLE_SCHEME=mbr E: UDISKS_PRESENTATION_NOPOLICY=0 E: USEC_INITIALIZED=342063581
Attachment:
insert-stick.log.gz
Description: GNU Zip compressed data
