Re: [PATCH] [RFC] [SCSI] mpt fusion: add support for 0x1000/0x0055

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 27 Jul 2012, adam radford wrote:

> >> The device identifies itself as
> >>
> >> 0d:05.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X
> >> Fusion-MPT SAS (rev 01) Subsystem: NEC Corporation SAS1068
> >>
> >> and seems to be functionally compatible with 0x0054 PID.
> >>
> >> The request for support of this device has been raised on mailinglists
> >> several
> >> times in the past (see [1] [2] and more), but aparently the PCI ID never
> >> made it
> >> to mptsas_pci_table[].
> >>
> >> [1] http://comments.gmane.org/gmane.linux.scsi/63836
> >> [2] http://lkml.indiana.edu/hypermail/linux/kernel/0701.2/1715.html
> >>
> >> Signed-off-by: Jiri Kosina <jkosina@xxxxxxx>
> >> ---
> >>
> >>
> >> I guess the "Subsystem: NEC Corporation" is telling us some rebranding
> >> story, including the PID change ... ?
> >
> > Hi guys,
> >
> > any feedback on this please?
> >
> > Thanks.
> 
> NACK.
> 
> Vendor 0x1000, Device id 0x0055 is actually an old LSI MegaRAID 1068
> based software raid board.  This device was never qualified nor
> intended to be used with the mpt fusion driver.

So, what is the alternative?

The only thing I know is that it works at least in basic mode (haven't 
tested performance at all).

Thanks,

-- 
Jiri Kosina
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux