Re: 'Device not ready' issue on mpt2sas since 3.1.10

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello James,

Am 25.07.2012 21:55, schrieb James Bottomley:>
> It looks like a hack like this might be needed.
>
> James
>

<SNIP>

I don't yet understand all the code but I'm following your discussion
with Tejun: I've set up a minimal vm running gentoo with a mpt2sas
driven controller in passthrough mode. I've applied your proposed patch
against the vanilla 3.5.0 kernel (which includes Tejun's commit), and
I'm happy to report the problem does seem to get fixed by it.
Well at least sending the sata drive in standby using 'hdparm -y' now
works (according to 'hdparm -C') without these nasty i/o errors on later
i/o. That is to say the drive wakes up again (e.g. from a 'fdisk -l
/dev/sda' command) and returns data.

--
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux