From: Dave Maurer <david.c.maurer@xxxxxxxxx> The following patch is a fix for the WD workaround COMSAS negation timeout change. This patch disables the OOB SM when the OOB is placed in reset, which allows the updated COMSAS negation timeout value to take effect. Cc: Dan Thompson <daniel.j.thompson@xxxxxxxxx> Reported-by: Dan Thompson <daniel.j.thompson@xxxxxxxxx> Signed-off-by: Dave Maurer <david.c.maurer@xxxxxxxxx> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx> --- drivers/scsi/isci/phy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 18f43d4..ebb8f53 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -1205,6 +1205,7 @@ static void scu_link_layer_start_oob(struct isci_phy *iphy) /** Reset OOB sequence - start */ val = readl(&ll->phy_configuration); val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); writel(val, &ll->phy_configuration); readl(&ll->phy_configuration); /* flush */ @@ -1236,6 +1237,7 @@ static void scu_link_layer_tx_hard_reset( * to the starting state. */ phy_configuration_value = readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
