-----Original Message----- From: Kyle McMartin [mailto:kmcmarti@xxxxxxxxxx] Sent: Wednesday, July 11, 2012 9:43 AM To: linux-scsi@xxxxxxxxxxxxxxx Cc: huangj@xxxxxxxxxxx; Krishna Gudipati Subject: [PATCH] bfa: squelch lockdep complaint with a spin_lock_init Spotted this while looking at another issue... INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 298, comm: udevd Not tainted 3.3.0 #1 Call Trace: [<ffffffff810cee63>] __lock_acquire+0x1363/0x1bb0 [<ffffffff816593d2>] ? __slab_alloc+0x4a0/0x4fd [<ffffffff81020063>] ? native_sched_clock+0x13/0x80 [<ffffffff810200d9>] ? sched_clock+0x9/0x10 [<ffffffff810cfd81>] lock_acquire+0xa1/0x1e0 [<ffffffffa0321b83>] ? bfa_fcs_lport_aen_post+0x43/0x160 [bfa] [<ffffffff816630e5>] _raw_spin_lock_irqsave+0x65/0xb0 [<ffffffffa0321b83>] ? bfa_fcs_lport_aen_post+0x43/0x160 [bfa] [<ffffffffa0321b83>] bfa_fcs_lport_aen_post+0x43/0x160 [bfa] [<ffffffffa032fa57>] bfa_fcs_lport_init+0x97/0x120 [bfa] [<ffffffffa031d4ff>] bfa_fcs_fabric_sm_uninit+0x1cf/0x250 [bfa] [<ffffffffa031c1da>] bfa_fcs_fabric_modinit+0x2a/0xb0 [bfa] [<ffffffffa031bef2>] ? bfa_fcs_fabric_attach+0xf2/0x170 [bfa] [<ffffffffa031e75a>] bfa_fcs_init+0x2a/0x40 [bfa] [<ffffffffa02facf7>] bfad_drv_init+0x107/0x1f0 [bfa] [<ffffffffa02fb057>] bfad_pci_probe+0x277/0x450 [bfa] [<ffffffff81354d4c>] local_pci_probe+0x5c/0xd0 [<ffffffff81354ed1>] pci_device_probe+0x111/0x120 [<ffffffff8141c0e6>] driver_probe_device+0x96/0x2f0 [<ffffffff8141c3eb>] __driver_attach+0xab/0xb0 [<ffffffff8141c340>] ? driver_probe_device+0x2f0/0x2f0 [<ffffffff8141a2e5>] bus_for_each_dev+0x55/0x90 [<ffffffffa037b000>] ? 0xffffffffa037afff [<ffffffff8141bbce>] driver_attach+0x1e/0x20 [<ffffffff8141b8d8>] bus_add_driver+0x1b8/0x2b0 [<ffffffffa037b000>] ? 0xffffffffa037afff [<ffffffff8141cbc7>] driver_register+0x77/0x160 [<ffffffffa037b000>] ? 0xffffffffa037afff [<ffffffff81353b23>] __pci_register_driver+0x73/0xf0 [<ffffffffa037b000>] ? 0xffffffffa037afff [<ffffffffa037b083>] bfad_init+0x83/0x1000 [bfa] [<ffffffff8100212a>] do_one_initcall+0x12a/0x180 [<ffffffff810df0d0>] sys_init_module+0xc0/0x220 [<ffffffff8166bbe9>] system_call_fastpath+0x16/0x1b Signed-off-by: Kyle McMartin <kmcmarti@xxxxxxxxxx> --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -1383,6 +1383,8 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) bfa_sm_set_state(bfad, bfad_sm_uninit); spin_lock_init(&bfad->bfad_lock); + spin_lock_init(&bfad->bfad_aen_spinlock); + pci_set_drvdata(pdev, bfad); bfad->ref_count = 0; ----- Looks good, thanks for the patch Kyle. Acked-by: Krishna Gudipati <kgudipat@xxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html