[PATCH RESUBMIT 2/3] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.  Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).

Signed-off-by: Jon Mason <jdmason@xxxxxxxx>
Cc: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Cc: linux-driver@xxxxxxxxxx
---
 drivers/scsi/qla2xxx/qla_init.c |    4 ++--
 drivers/scsi/qla2xxx/qla_nx.c   |    4 ++--
 drivers/scsi/qla2xxx/qla_os.c   |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ca50847..a44653b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -685,7 +685,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
 		pcix_set_mmrbc(ha->pdev, 2048);
 
 	/* PCIe -- adjust Maximum Read Request Size (2048). */
-	if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+	if (pci_is_pcie(ha->pdev))
 		pcie_set_readrq(ha->pdev, 2048);
 
 	pci_disable_rom(ha->pdev);
@@ -721,7 +721,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/* PCIe -- adjust Maximum Read Request Size (2048). */
-	if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+	if (pci_is_pcie(ha->pdev))
 		pcie_set_readrq(ha->pdev, 2048);
 
 	pci_disable_rom(ha->pdev);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index caf627b..9ce3a8f 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1620,7 +1620,7 @@ qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 	char lwstr[6];
 	uint16_t lnk;
 
-	pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_reg = pci_pcie_cap(ha->pdev);
 	pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk);
 	ha->link_width = (lnk >> 4) & 0x3f;
 
@@ -2528,7 +2528,7 @@ qla82xx_start_firmware(scsi_qla_host_t *vha)
 	}
 
 	/* Negotiated Link width */
-	pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_cap = pci_pcie_cap(ha->pdev);
 	pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk);
 	ha->link_width = (lnk >> 4) & 0x3f;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6d1d873..fb8cd38 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -482,12 +482,12 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 	uint32_t pci_bus;
 	int pcie_reg;
 
-	pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_reg = pci_pcie_cap(ha->pdev);
 	if (pcie_reg) {
 		char lwstr[6];
 		uint16_t pcie_lstat, lspeed, lwidth;
 
-		pcie_reg += 0x12;
+		pcie_reg += PCI_EXP_LNKCAP;
 		pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 		lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 		lwidth = (pcie_lstat &
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux