[resend PATCH 3/5] libsas: suspend / resume support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Jacek Danecki <jacek.danecki@xxxxxxxxx>
Tested-by: Maciej Patelczyk <maciej.patelczyk@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
 drivers/scsi/libsas/sas_ata.c      |   86 ++++++++++++++++++++++++++++++++++
 drivers/scsi/libsas/sas_discover.c |   69 ++++++++++++++++++++++++----
 drivers/scsi/libsas/sas_dump.c     |    1 
 drivers/scsi/libsas/sas_event.c    |    4 +-
 drivers/scsi/libsas/sas_init.c     |   90 ++++++++++++++++++++++++++++++++++++
 drivers/scsi/libsas/sas_internal.h |    1 
 drivers/scsi/libsas/sas_phy.c      |   21 ++++++++
 drivers/scsi/libsas/sas_port.c     |   52 ++++++++++++++++++++-
 include/scsi/libsas.h              |   20 ++++++--
 include/scsi/sas_ata.h             |   10 ++++
 10 files changed, 335 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index bec3bc8..4208e16 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -700,6 +700,92 @@ void sas_probe_sata(struct asd_sas_port *port)
 		if (ata_dev_disabled(sas_to_ata_dev(dev)))
 			sas_fail_probe(dev, __func__, -ENODEV);
 	}
+
+}
+
+static bool sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
+{
+	struct domain_device *dev, *n;
+	bool retry = false;
+
+	list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
+		int rc;
+
+		if (!dev_is_sata(dev))
+			continue;
+
+		sas_ata_wait_eh(dev);
+		rc = dev->sata_dev.pm_result;
+		if (rc == -EAGAIN)
+			retry = true;
+		else if (rc) {
+			/* since we don't have a
+			 * ->port_{suspend|resume} routine in our
+			 *  ata_port ops, and no entanglements with
+			 *  acpi, suspend should just be mechanical trip
+			 *  through eh, catch cases where these
+			 *  assumptions are invalidated
+			 */
+			WARN_ONCE(1, "failed %s %s error: %d\n", func,
+				 dev_name(&dev->rphy->dev), rc);
+		}
+
+		/* if libata failed to power manage the device, tear it down */
+		if (ata_dev_disabled(sas_to_ata_dev(dev)))
+			sas_fail_probe(dev, func, -ENODEV);
+	}
+
+	return retry;
+}
+
+void sas_suspend_sata(struct asd_sas_port *port)
+{
+	struct domain_device *dev;
+
+ retry:
+	mutex_lock(&port->ha->disco_mutex);
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		struct sata_device *sata;
+
+		if (!dev_is_sata(dev))
+			continue;
+
+		sata = &dev->sata_dev;
+		if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
+			continue;
+
+		sata->pm_result = -EIO;
+		ata_sas_port_async_suspend(sata->ap, &sata->pm_result);
+	}
+	mutex_unlock(&port->ha->disco_mutex);
+
+	if (sas_ata_flush_pm_eh(port, __func__))
+		goto retry;
+}
+
+void sas_resume_sata(struct asd_sas_port *port)
+{
+	struct domain_device *dev;
+
+ retry:
+	mutex_lock(&port->ha->disco_mutex);
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		struct sata_device *sata;
+
+		if (!dev_is_sata(dev))
+			continue;
+
+		sata = &dev->sata_dev;
+		if (sata->ap->pm_mesg.event == PM_EVENT_ON)
+			continue;
+
+		sata->pm_result = -EIO;
+		ata_sas_port_async_resume(sata->ap, &sata->pm_result);
+	}
+	mutex_unlock(&port->ha->disco_mutex);
+
+	if (sas_ata_flush_pm_eh(port, __func__))
+		goto retry;
 }
 
 /**
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 3e9dc1a..a0c3003 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -24,6 +24,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/async.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_eh.h>
 #include "sas_internal.h"
@@ -180,16 +181,18 @@ int sas_notify_lldd_dev_found(struct domain_device *dev)
 	struct Scsi_Host *shost = sas_ha->core.shost;
 	struct sas_internal *i = to_sas_internal(shost->transportt);
 
-	if (i->dft->lldd_dev_found) {
-		res = i->dft->lldd_dev_found(dev);
-		if (res) {
-			printk("sas: driver on pcidev %s cannot handle "
-			       "device %llx, error:%d\n",
-			       dev_name(sas_ha->dev),
-			       SAS_ADDR(dev->sas_addr), res);
-		}
-		kref_get(&dev->kref);
+	if (!i->dft->lldd_dev_found)
+		return 0;
+
+	res = i->dft->lldd_dev_found(dev);
+	if (res) {
+		printk("sas: driver on pcidev %s cannot handle "
+		       "device %llx, error:%d\n",
+		       dev_name(sas_ha->dev),
+		       SAS_ADDR(dev->sas_addr), res);
 	}
+	set_bit(SAS_DEV_FOUND, &dev->state);
+	kref_get(&dev->kref);
 	return res;
 }
 
@@ -200,7 +203,10 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev)
 	struct Scsi_Host *shost = sas_ha->core.shost;
 	struct sas_internal *i = to_sas_internal(shost->transportt);
 
-	if (i->dft->lldd_dev_gone) {
+	if (!i->dft->lldd_dev_gone)
+		return;
+
+	if (test_and_clear_bit(SAS_DEV_FOUND, &dev->state)) {
 		i->dft->lldd_dev_gone(dev);
 		sas_put_device(dev);
 	}
@@ -234,6 +240,47 @@ static void sas_probe_devices(struct work_struct *work)
 	}
 }
 
+static void sas_suspend_devices(struct work_struct *work)
+{
+	struct asd_sas_phy *phy;
+	struct domain_device *dev;
+	struct sas_discovery_event *ev = to_sas_discovery_event(work);
+	struct asd_sas_port *port = ev->port;
+	struct Scsi_Host *shost = port->ha->core.shost;
+	struct sas_internal *si = to_sas_internal(shost->transportt);
+
+	clear_bit(DISCE_SUSPEND, &port->disc.pending);
+
+	sas_suspend_sata(port);
+
+	/* lldd is free to forget the domain_device across the
+	 * suspension, we force the issue here to keep the reference
+	 * counts aligned
+	 */
+	list_for_each_entry(dev, &port->dev_list, dev_list_node)
+		sas_notify_lldd_dev_gone(dev);
+
+	/* we are suspending, so we know events are disabled and
+	 * phy_list is not being mutated
+	 */
+	list_for_each_entry(phy, &port->phy_list, port_phy_el) {
+		if (si->dft->lldd_port_formed)
+			si->dft->lldd_port_deformed(phy);
+		phy->suspended = 1;
+		port->suspended = 1;
+	}
+}
+
+static void sas_resume_devices(struct work_struct *work)
+{
+	struct sas_discovery_event *ev = to_sas_discovery_event(work);
+	struct asd_sas_port *port = ev->port;
+
+	clear_bit(DISCE_RESUME, &port->disc.pending);
+
+	sas_resume_sata(port);
+}
+
 /**
  * sas_discover_end_dev -- discover an end device (SSP, etc)
  * @end: pointer to domain device of interest
@@ -530,6 +577,8 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
 		[DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
 		[DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
 		[DISCE_PROBE] = sas_probe_devices,
+		[DISCE_SUSPEND] = sas_suspend_devices,
+		[DISCE_RESUME] = sas_resume_devices,
 		[DISCE_DESTRUCT] = sas_destruct_devices,
 	};
 
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
index fc46093..cd6f99c 100644
--- a/drivers/scsi/libsas/sas_dump.c
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -41,6 +41,7 @@ static const char *sas_phye_str[] = {
 	[1] = "PHYE_OOB_DONE",
 	[2] = "PHYE_OOB_ERROR",
 	[3] = "PHYE_SPINUP_HOLD",
+	[4] = "PHYE_RESUME_TIMEOUT",
 };
 
 void sas_dprint_porte(int phyid, enum port_event pe)
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
index 789c4d8..aadbd53 100644
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -134,7 +134,7 @@ static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
 			&phy->port_events[event].work, ha);
 }
 
-static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
 {
 	struct sas_ha_struct *ha = phy->ha;
 
@@ -159,7 +159,7 @@ int sas_init_events(struct sas_ha_struct *sas_ha)
 
 	sas_ha->notify_ha_event = notify_ha_event;
 	sas_ha->notify_port_event = notify_port_event;
-	sas_ha->notify_phy_event = notify_phy_event;
+	sas_ha->notify_phy_event = sas_notify_phy_event;
 
 	return 0;
 }
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 014297c..dbc8a79 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -178,7 +178,7 @@ Undo_phys:
 	return error;
 }
 
-int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+static void sas_disable_events(struct sas_ha_struct *sas_ha)
 {
 	/* Set the state to unregistered to avoid further unchained
 	 * events to be queued, and flush any in-progress drainers
@@ -189,7 +189,11 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha)
 	spin_unlock_irq(&sas_ha->lock);
 	__sas_drain_work(sas_ha);
 	mutex_unlock(&sas_ha->drain_mutex);
+}
 
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+	sas_disable_events(sas_ha);
 	sas_unregister_ports(sas_ha);
 
 	/* flush unregistration work */
@@ -381,6 +385,90 @@ int sas_set_phy_speed(struct sas_phy *phy,
 	return ret;
 }
 
+void sas_prep_resume_ha(struct sas_ha_struct *ha)
+{
+	int i;
+
+	set_bit(SAS_HA_REGISTERED, &ha->state);
+
+	/* clear out any stale link events/data from the suspension path */
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+		phy->port_events_pending = 0;
+		phy->phy_events_pending = 0;
+		phy->frame_rcvd_size = 0;
+	}
+}
+EXPORT_SYMBOL(sas_prep_resume_ha);
+
+static int phys_suspended(struct sas_ha_struct *ha)
+{
+	int i, rc = 0;
+
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		if (phy->suspended)
+			rc++;
+	}
+
+	return rc;
+}
+
+void sas_resume_ha(struct sas_ha_struct *ha)
+{
+	const unsigned long tmo = msecs_to_jiffies(25000);
+	int i;
+
+	/* deform ports on phys that did not resume
+	 * at this point we may be racing the phy coming back (as posted
+	 * by the lldd).  So we post the event and once we are in the
+	 * libsas context check that the phy remains suspended before
+	 * tearing it down.
+	 */
+	i = phys_suspended(ha);
+	if (i)
+		dev_info(ha->dev, "waiting up to 25 seconds for %d phy%s to resume\n",
+			 i, i > 1 ? "s" : "");
+	wait_event_timeout(ha->eh_wait_q, phys_suspended(ha) == 0, tmo);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		if (phy->suspended) {
+			dev_warn(&phy->phy->dev, "resume timeout\n");
+			sas_notify_phy_event(phy, PHYE_RESUME_TIMEOUT);
+		}
+	}
+
+	/* all phys are back up or timed out, turn on i/o so we can
+	 * flush out disks that did not return
+	 */
+	scsi_unblock_requests(ha->core.shost);
+	sas_drain_work(ha);
+}
+EXPORT_SYMBOL(sas_resume_ha);
+
+void sas_suspend_ha(struct sas_ha_struct *ha)
+{
+	int i;
+
+	sas_disable_events(ha);
+	scsi_block_requests(ha->core.shost);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_port *port = ha->sas_port[i];
+
+		sas_discover_event(port, DISCE_SUSPEND);
+	}
+
+	/* flush suspend events while unregistered */
+	mutex_lock(&ha->drain_mutex);
+	__sas_drain_work(ha);
+	mutex_unlock(&ha->drain_mutex);
+}
+EXPORT_SYMBOL(sas_suspend_ha);
+
 static void sas_phy_release(struct sas_phy *phy)
 {
 	kfree(phy->hostdata);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 507e4cf..1de6796 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -89,6 +89,7 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 			enum phy_func phy_func, struct sas_phy_linkrates *);
 int sas_smp_get_phy_events(struct sas_phy *phy);
 
+void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event);
 void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
 struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
 struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
index 521422e..cdee446 100644
--- a/drivers/scsi/libsas/sas_phy.c
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -94,6 +94,25 @@ static void sas_phye_spinup_hold(struct work_struct *work)
 	i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
 }
 
+static void sas_phye_resume_timeout(struct work_struct *work)
+{
+	struct asd_sas_event *ev = to_asd_sas_event(work);
+	struct asd_sas_phy *phy = ev->phy;
+
+	clear_bit(PHYE_RESUME_TIMEOUT, &phy->phy_events_pending);
+
+	/* phew, lldd got the phy back in the nick of time */
+	if (!phy->suspended) {
+		dev_info(&phy->phy->dev, "resume timeout cancelled\n");
+		return;
+	}
+
+	phy->error = 0;
+	phy->suspended = 0;
+	sas_deform_port(phy, 1);
+}
+
+
 /* ---------- Phy class registration ---------- */
 
 int sas_register_phys(struct sas_ha_struct *sas_ha)
@@ -105,6 +124,8 @@ int sas_register_phys(struct sas_ha_struct *sas_ha)
 		[PHYE_OOB_DONE] = sas_phye_oob_done,
 		[PHYE_OOB_ERROR] = sas_phye_oob_error,
 		[PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+		[PHYE_RESUME_TIMEOUT] = sas_phye_resume_timeout,
+
 	};
 
 	static const work_func_t sas_port_event_fns[PORT_NUM_EVENTS] = {
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index e884a8c..1398b71 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -39,6 +39,49 @@ static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy
 	return true;
 }
 
+static void sas_resume_port(struct asd_sas_phy *phy)
+{
+	struct domain_device *dev;
+	struct asd_sas_port *port = phy->port;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
+
+	if (si->dft->lldd_port_formed)
+		si->dft->lldd_port_formed(phy);
+
+	if (port->suspended)
+		port->suspended = 0;
+	else {
+		/* we only need to handle "link returned" actions once */
+		return;
+	}
+
+	/* if the port came back:
+	 * 1/ presume every device came back
+	 * 2/ force the next revalidation to check all expander phys
+	 */
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		int i, rc;
+
+		rc = sas_notify_lldd_dev_found(dev);
+		if (rc) {
+			sas_unregister_dev(port, dev);
+			continue;
+		}
+
+		if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+			dev->ex_dev.ex_change_count = -1;
+			for (i = 0; i < dev->ex_dev.num_phys; i++) {
+				struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
+
+				phy->phy_change_count = -1;
+			}
+		}
+	}
+
+	sas_discover_event(port, DISCE_RESUME);
+}
+
 /**
  * sas_form_port -- add this phy to a port
  * @phy: the phy of interest
@@ -58,7 +101,14 @@ static void sas_form_port(struct asd_sas_phy *phy)
 	if (port) {
 		if (!phy_is_wideport_member(port, phy))
 			sas_deform_port(phy, 0);
-		else {
+		else if (phy->suspended) {
+			phy->suspended = 0;
+			sas_resume_port(phy);
+
+			/* phy came back, try to cancel the timeout */
+			wake_up(&sas_ha->eh_wait_q);
+			return;
+		} else {
 			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
 				    __func__, phy->id, phy->port->id,
 				    phy->port->num_phys);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index ae33706..ef937b5 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -79,7 +79,8 @@ enum phy_event {
 	PHYE_OOB_DONE         = 1,
 	PHYE_OOB_ERROR        = 2,
 	PHYE_SPINUP_HOLD      = 3, /* hot plug SATA, no COMWAKE sent */
-	PHY_NUM_EVENTS        = 4,
+	PHYE_RESUME_TIMEOUT   = 4,
+	PHY_NUM_EVENTS        = 5,
 };
 
 enum discover_event {
@@ -87,8 +88,10 @@ enum discover_event {
 	DISCE_REVALIDATE_DOMAIN = 1,
 	DISCE_PORT_GONE         = 2,
 	DISCE_PROBE		= 3,
-	DISCE_DESTRUCT		= 4,
-	DISC_NUM_EVENTS		= 5,
+	DISCE_SUSPEND		= 4,
+	DISCE_RESUME		= 5,
+	DISCE_DESTRUCT		= 6,
+	DISC_NUM_EVENTS		= 7,
 };
 
 /* ---------- Expander Devices ---------- */
@@ -128,7 +131,7 @@ struct ex_phy {
 	u8   attached_sas_addr[SAS_ADDR_SIZE];
 	u8   attached_phy_id;
 
-	u8   phy_change_count;
+	int phy_change_count;
 	enum routing_attribute routing_attr;
 	u8   virtual:1;
 
@@ -141,7 +144,7 @@ struct ex_phy {
 struct expander_device {
 	struct list_head children;
 
-	u16    ex_change_count;
+	int    ex_change_count;
 	u16    max_route_indexes;
 	u8     num_phys;
 
@@ -169,6 +172,7 @@ struct sata_device {
         enum   ata_command_set command_set;
         struct smp_resp        rps_resp; /* report_phy_sata_resp */
         u8     port_no;        /* port number, if this is a PM (Port) */
+	int    pm_result;
 
 	struct ata_port *ap;
 	struct ata_host ata_host;
@@ -182,6 +186,7 @@ struct ssp_device {
 
 enum {
 	SAS_DEV_GONE,
+	SAS_DEV_FOUND, /* device notified to lldd */
 	SAS_DEV_DESTROY,
 	SAS_DEV_EH_PENDING,
 	SAS_DEV_LU_RESET,
@@ -273,6 +278,7 @@ struct asd_sas_port {
 	enum   sas_linkrate linkrate;
 
 	struct sas_work work;
+	int suspended;
 
 /* public: */
 	int id;
@@ -321,6 +327,7 @@ struct asd_sas_phy {
 	unsigned long phy_events_pending;
 
 	int error;
+	int suspended;
 
 	struct sas_phy *phy;
 
@@ -687,6 +694,9 @@ struct sas_domain_function_template {
 
 extern int sas_register_ha(struct sas_ha_struct *);
 extern int sas_unregister_ha(struct sas_ha_struct *);
+extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
+extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
+extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
 
 int sas_set_phy_speed(struct sas_phy *phy,
 		      struct sas_phy_linkrates *rates);
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index 2dfbdaa..ff71a56 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -45,6 +45,8 @@ void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
 void sas_ata_schedule_reset(struct domain_device *dev);
 void sas_ata_wait_eh(struct domain_device *dev);
 void sas_probe_sata(struct asd_sas_port *port);
+void sas_suspend_sata(struct asd_sas_port *port);
+void sas_resume_sata(struct asd_sas_port *port);
 void sas_ata_end_eh(struct ata_port *ap);
 #else
 
@@ -82,6 +84,14 @@ static inline void sas_probe_sata(struct asd_sas_port *port)
 {
 }
 
+static inline void sas_suspend_sata(struct asd_sas_port *port)
+{
+}
+
+static inline void sas_resume_sata(struct asd_sas_port *port)
+{
+}
+
 static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 {
 	return 0;

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux